Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
If i need to connect to a remote PLC through the web ! I don't see any way to configure the IP adress of the router before entering the IP of my PLC in the Remote Connection menu.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
check teamviewer with the VPN connection (VNP->inside teamviwer not any external configured VPN) this works for CoDeSys V2.3 and CoDeSys V3 similar as your are directly infront of the machine. (use TCPBlkdrv available since 3.4SP2)
cu
Edwin Schwellinger
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
If i need to connect to a remote PLC through the web ! I don't see any way to configure the IP adress of the router before entering the IP of my PLC in the Remote Connection menu.
check teamviewer with the VPN connection (VNP->inside teamviwer not any external configured VPN) this works for CoDeSys V2.3 and CoDeSys V3 similar as your are directly infront of the machine. (use TCPBlkdrv available since 3.4SP2)
cu
Edwin Schwellinger