OPC UA methods in Raspberry Pi?

edgarS
2016-08-30
2019-01-29
  • edgarS

    edgarS - 2016-08-30

    Hi

    I'm new to CODESYS and was wondering if its possible (and how) to define OPC UA methods on the server?

    I'm using the CODESYS Control for Raspberry Pi v.3.5.9.10.

    Thanks!

     
  • petergrote

    petergrote - 2016-11-07

    Hello Edgars

    You need to add the Symbol Configuration inside your project and check the OPC UA

    You also need to add some text in files, but I have attached some screen dump that I hope can help you further on.

    edgarS hat geschrieben:
    Hi
    I'm new to CODESYS and was wondering if its possible (and how) to define OPC UA methods on the server?
    I'm using the CODESYS Control for Raspberry Pi v.3.5.9.10.
    Thanks!

    IMG: 2016

    IMG: 2016

    IMG: 2016

    IMG: 2016

     
  • maiorfi

    maiorfi - 2016-12-12

    It looks like provided procedure is only targeted to exporting variables. What about OPCUA methods (i.e. actions exposed by OPCUA server)?

    Thanks!

     
  • eschwellinger

    eschwellinger - 2017-01-13

    Hi,
    there is an entry in our bugtracking/improvement database at the moment I see no release date when this will be in.

    BR
    Edwin

     
  • ctgarvey

    ctgarvey - 2017-08-30

    Edwin Schwellinger hat geschrieben:
    Hi,
    there is an entry in our bugtracking/improvement database at the moment I see no release date when this will be in.
    BR
    Edwin

    Hi Edwin,
    is there any update on whether methods may be exposed through the codesys opcua server yet? I have a multinational client and want to put this in front of them as part of our proof of concept demo.

    BR
    Cormac

     
  • eschwellinger

    eschwellinger - 2017-09-03

    Hi Cormac,

    still open and I do not see any implementation/release date for this issue.

    BR
    Edwin

     
  • ctgarvey

    ctgarvey - 2017-09-09

    Thanks Edwin,
    is there anyone I could talk to /ring, about this?
    Best regards,
    Cormac

     
  • eschwellinger

    eschwellinger - 2017-09-10

    Hi,
    Which OPCUA client are you using?
    BR
    Edwin

     
  • ctgarvey

    ctgarvey - 2017-09-21

    Hi Edwin,
    for test purposes Im using Unified Automation uaexpert V1.44 (on windows)
    thanks

     
  • Sharer

    Sharer - 2019-01-29

    Hi Edwin,

    Some time has elapsed since Cormac asked this question, so I post it again; do you know when methods may be exposed through the codesys opcua server ?

    BR
    Torgeir

     

Log in to post a comment.