I am building a small remote-control panel on a Raspberry Pi 5 (screen, push buttons, analog joystick). Setup: CODESYS Control for Raspberry Pi 64 SL 4.22.0.0, IDE V3.5 SP21 Patch 3 (3.5.21.30), Raspberry Pi OS 64-bit. The Pi controls a remote WAGO PFC200 over Modbus TCP (OpenVPN link, LoRa… still under test).
Questions:
The Pi has no analog inputs. Besides the MCP3008 (SPI) in the "Raspberry Pi Legacy" package, are there other CODESYS device descriptions or drivers for ADC or analog I/O boards on the Pi ? Which boards or ADC chips do you recommend for the Pi 5 that already have a CODESYS device description or driver ?
Do the SPI, I2C and 1-Wire drivers of that package work on the Pi 5 ?
Thank you for any pointer.
Best regards, Antoine.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I am building a small remote-control panel on a Raspberry Pi 5 (screen, push buttons, analog joystick). Setup: CODESYS Control for Raspberry Pi 64 SL 4.22.0.0, IDE V3.5 SP21 Patch 3 (3.5.21.30), Raspberry Pi OS 64-bit. The Pi controls a remote WAGO PFC200 over Modbus TCP (OpenVPN link, LoRa… still under test).
Questions:
Thank you for any pointer.
Best regards, Antoine.