Hello, i have a similar problem with this. Im using an EL6752 from Beckhoff DeviceNet Master and i dont have an EDS for the comms with the slave (EVO GT II Valve). In CODESYS they dont let me put a digital slave. My question, how can i add a slave in the EL6752 the Process data mapping to see values.
I cant add a DeviceNet slave in the tree, thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
After i add the .eds File into the device repo. the device added as DEVICENET and that was expected.
My question how i can add a devicenet master, then scan for the slave. see below
Note: I am using the brad communication as a master. is there a way to support that. thank you in advanced.
No, there is no devicenet supported in CODESYS..
Hello, i have a similar problem with this. Im using an EL6752 from Beckhoff DeviceNet Master and i dont have an EDS for the comms with the slave (EVO GT II Valve). In CODESYS they dont let me put a digital slave. My question, how can i add a slave in the EL6752 the Process data mapping to see values.
I cant add a DeviceNet slave in the tree, thanks