Scan failed. Check of the gateway run

bekoo
2021-05-20
2021-05-20
  • bekoo - 2021-05-20

    Hi to everybody. I have a dilemma. I am doing a little project in which I connect raspberry pi board and codesys software. The problem is with the scan of the gateway. I am trying to scan the device but codesys gives me this kind of error. I tried to add a new gateway and change the ip of this gateway, but it was useless. If anybody has any idea how to solve this issue, it would be much appreciated

    P.S. linked image of the error

     
  • juanir - 2021-05-20

    If at somepoint it worked: You can try killing the gateway's service, maybe a daemon is running. In windows you can open a cmd with privilages, write in the command prompt "tasklist" and then taskkill /F /PID xyz where xyz is the PID number of your process.

    If this is a new project of yours and it never worked before, maybe you can share us more about the connection you have. Is the Rasp connected directly to the pc, or to the gateway. did you try use the "localhost" gateway?

    Bye!

     
  • eschwellinger

    eschwellinger - 2021-05-20

    hi,
    which Raspberry PI runtime version is installed exactly?

    BR
    Edwin

     
    • bekoo - 2021-05-20

      Hi
      4.0.1.0

      regards
      Bekoo

       

      Last edit: bekoo 2021-05-20
  • bekoo - 2021-05-20

    @juanir

    This is completely new project. I am trying to connect raspberry pi board with codesys software in headless mode, i.e. without any ethernet cable.

    Moreover I tried to connect also with localhost gateway but the same kind of error.

    The last but not least, this kind of error start to appear after I downloaded and installed the new package.

    P.S. I tried to go to the previous package, but useless

    regards
    Bekoo

     

    Last edit: bekoo 2021-05-20
  • bekoo - 2021-05-20

    Guys, thanx. I solved the problem.

    P.S. I only forgot to put a tick in Include Codesys Edge Gateway

    best regards
    Bekoo

     

Log in to post a comment.