Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi,
I use Codesys 3.5.16.10 My project include Raspberry Pi SL SPI master for MCP3008. It work with Raspberry connected. But in Simulation mode compiler returns errors: [ERROR] raspberry pi peripherals, 3.5.13.0 (3s - smart software solutions gmbh): transferExt [spiMaster]: C0032: Cannot convert type 'POINTER TO spi_ioc_transfer' to type 'UDINT' [ERROR] raspberry pi peripherals, 3.5.13.0 (3s - smart software solutions gmbh): init [spiMaster]: C0032: Cannot convert type 'POINTER TO DINT' to type 'UDINT'
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
you need to report this in the CODESYS store -> my question -> bug report
Seems that the simulation dooes not work with raspberry pi peripherals, 3.5.13.0
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I have a similar issue - we have been using codesys V3.5.16.20
Do you have any suggestions or confirmation that this will work with a different version of codesys and Pi extension
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I use Codesys 3.5.16.10 My project include Raspberry Pi SL SPI master for MCP3008. It work with Raspberry connected. But in Simulation mode compiler returns errors:
[ERROR] raspberry pi peripherals, 3.5.13.0 (3s - smart software solutions gmbh): transferExt [spiMaster]: C0032: Cannot convert type 'POINTER TO spi_ioc_transfer' to type 'UDINT'
[ERROR] raspberry pi peripherals, 3.5.13.0 (3s - smart software solutions gmbh): init [spiMaster]: C0032: Cannot convert type 'POINTER TO DINT' to type 'UDINT'
Hi,
you need to report this in the CODESYS store -> my question -> bug report
Seems that the simulation dooes not work with raspberry pi peripherals, 3.5.13.0
Well,
Their answer was:
"Dear,
you can also restart the Pi and used again for 2h in demo.
Mit freundlichen Grüßen / Best regards"
No bad at all :)
Hi,
I have a similar issue - we have been using codesys V3.5.16.20
Do you have any suggestions or confirmation that this will work with a different version of codesys and Pi extension
I fear you need to update if you need a solution for this.
Last edit: eschwellinger 2023-09-08