Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hello, I cannot see the enable property for the modbus tcp slave even if the option "enable diagnosis for devices" is activated in the PLC settings. I use Control for Raspberry Pi SL v3.5.15.40.
Does someone know why ?
Hello, I cannot see the enable property for the modbus tcp slave even if the option "enable diagnosis for devices" is activated in the PLC settings. I use Control for Raspberry Pi SL v3.5.15.40.
Does someone know why ?
Same here. That result in me being unable to change the Modbus_TCP_Slave ip address with the UpdateCommunicationSettings function. V3.5.16.30
Isn't IP address handled by the ethernet adapter rather than the protocol ?
Did you had a look at IoDrvEthernet ?
https://help.codesys.com/webapp/idx-IoDrvEthernet-lib;product=IoDrvEthernet;version=3.5.14.0
I want to change the ip of the target modbus slave as shown in the following image.
What I'm trying to do and probably what the OP too, is to put xEnable to False as prescribed here: https://help.codesys.com/webapp/_mod_lib_modbustcpslave;product=core_modbus_configuration_editor;version=3.5.16.0
The goal been to be able to use the UpdateCommunicationSettings function to update the slave ip.
https://faq.codesys.com/plugins/servlet/mobile?contentId=24510471#content/view/24510471