Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I use Codesys 3.5.12 running as Soft Plc on an Exor HMI panel.
I don't know which exact option I have changed but now I am asked to enter username and password every time I open the project and log in for the first time.
The communication with the HMI runtime running on the panel is also broken probably it can access the Codesys 3 ethernet driver.
How do I disable the user management to disable password?
this is the stupidest thing I've ever seen:
I don't know how, but I created the user management, without creating a user.
The only user is "Owner" whose password I don't know
to disable management or create a new user, you need to log in ... with the user whose password I do not know.
this is madness
even if it happens by mistake
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I use Codesys 3.5.12 running as Soft Plc on an Exor HMI panel.
I don't know which exact option I have changed but now I am asked to enter username and password every time I open the project and log in for the first time.
The communication with the HMI runtime running on the panel is also broken probably it can access the Codesys 3 ethernet driver.
How do I disable the user management to disable password?
I have found the following video but the "Change communication policy" option isn't available for me.
https://www.youtube.com/watch?v=9tfm0y_Bwis m
Hi,
if you accidentally activated it - use rightrclick on the device tree -> Reset Origin Device
If the Password not have been changed (if you put it to serious use changing this is mandatory)
Administrator
Administrator
BR
Edwin
Hi, I have press the Reset Origin Device but codesys still prompt me to enter my username and password. What can i do?
Hi,
Linux SL / Raspberry PI etc:
/etc/CODESYSControl_User.cfg
[CmpUserMgr]
;allow usage of CODESYSControl runtime without activated user management (not recommended):
SECURITY.UserMgmtEnforce=NO
Control RTE:
C:\ProgramData\CODESYS\CODESYSControlRTEV3\CODESYSControl_User.cfg
[CmpUserMgr]
;allow usage of CODESYSControl runtime without activated user management (not recommended):
SECURITY.UserMgmtEnforce=NO
Control WIN:
c:\ProgramData\CODESYS\CODESYSControlWinV3x64\xxxxxxxx\CODESYSControl.cfg
[CmpUserMgr]
;allow usage of CODESYSControl runtime without activated user management (not recommended):
SECURITY.UserMgmtEnforce=NO
hi all.
strange because :
http://www.jmobile.net/JMobile-Documents.html
exor use CODESYS v3.5 SP10 Patch 5
They just released CODESYS v3.5 SP12. Look at the bottom of the page below.
https://www.exorint.com/en/software/jmobile
Thank you Edwin.
I managed to remove it.
this is the stupidest thing I've ever seen:
I don't know how, but I created the user management, without creating a user.
The only user is "Owner" whose password I don't know
to disable management or create a new user, you need to log in ... with the user whose password I do not know.
this is madness
even if it happens by mistake
...sorry, too many times
but i'm really frustrated right now!