Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

PFC200 Web Admin: "Requested content is not available."

S1ack
2019-08-23
2019-08-27
  • S1ack

    S1ack - 2019-08-23

    Wago 750-8212
    CODESYS Control for PFC200 SL 3.5.14.30 Installed and executing applications just fine.
    When I log into the web admin.
    Selecting any meaningful sub menu option results in the following message.....

    Any help with a resolution greatly appreciated.

    Edit: It used to work. I only discovered this after a few weeks of development I went to change the IP address of a NIC and discovered I could not.

    IMG: Bild

     
  • eschwellinger

    eschwellinger - 2019-08-23

    Hm...
    never seen this.
    Which Wago firmware is on that PFC?
    Sure the workaround is:
    Login by putty/ssh and do the same with:
    cbm
    This is the linux shell based... management command.
    BR
    Edwin

     
  • S1ack

    S1ack - 2019-08-26

    Edwin Schwellinger hat geschrieben:
    Which Wago firmware is on that PFC?

    Firmware Revision: 02.08.35(11) (From web admin this bit works)

    Edwin Schwellinger hat geschrieben:
    Sure the workaround is:
    Login by putty/ssh and do the same with:
    cbm
    This is the linux shell based... management command.

    ======================================================================
     WAGO Console Based Management Tool
    ======================================================================
     Controller Details
    ----------------------------------------------------------------------
     Product Description..........WAGO 750-8212 PFC200 G2 2ETH RS
     Order Number.................750-8212
     License Information..........Codesys-Runtime-License
     Firmware Revision............02.08.35(11)
    ----------------------------------------------------------------------
     Q or RETURN to quit
    ----------------------------------------------------------------------
    

    I have a ticket with CoDeSys, and through that they requested 'df' from SSH command line...

    root@PFC200V3-449FEA:~ df
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/root               245679    234335         0 100% /
    devtmpfs                252580         4    252576   0% /dev
    none                    252580        48    252532   0% /tmp
    none                    252580         0    252580   0% /media
    none                      4096        96      4000   2% /var/log
    none                    252580        52    252528   0% /var/run
    none                    252580         0    252580   0% /var/lock
    none                    252580         0    252580   0% /var/tmp
    tmpfs                   252580         4    252576   0% /dev
    tmpfs                   252580        56    252524   0% /run
    /dev/mmcblk1p1           65382     22952     42430  35% /boot
    /dev/mmcblk1p5         2031432      7300   1919276   0% /home
    
     
  • eschwellinger

    eschwellinger - 2019-08-26

    Hi,
    No free space left...
    Remove /root/codesys... .deb packages..install files

    BR
    Edwin

     
  • S1ack

    S1ack - 2019-08-26

    Edwin Schwellinger hat geschrieben:
    Hi,
    No free space left...
    Remove /root/codesys... .deb packages..install files

    Being new to Linux. I need to be sure I understand your response.
    Are you saying that under dev/root/ I'll find a /CoDeSys folder. and under that I should delete *.deb files (or better still, remove the entire /codesys folder)?

    Would be really nice if the "firststeps_codesys_control_for_pfc200_sl_en.pdf" document addressed this with a section entitled 'cleanup'.

     
  • eschwellinger

    eschwellinger - 2019-08-27

    Hi,
    This is a bug, the debian packages on using
    the update tool to deploy the runtime are not removed after installing them.
    So the procedure is:
    Login by ssh client an delete the files which have codesys
    ... .deb .
    Then you should see around 89-90 % used space on the flash.
    The bug is solved with 3.5SP15 runtime.
    If you see still
    100%... a reset origin device by rightclick in the devicetree in CODESYS... will delete all files which are dowloaded by CODESYS
    BR
    Edwin

     
  • S1ack

    S1ack - 2019-08-27

    I tried to find "the files which have codesys... .deb" but my Linux muscle is weak.
    So I reset origin.

    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/root               245679    222880      9692  96% /
    

    And now the web admin works again.

    Veilen Dank for the help.
    I'll be upgrading to codesys to SP15.

     

Log in to post a comment.