CODESYS Forge - CODESYS Forge / Talk / Runtime 🇬🇧: PCAN serial "No CAN driver found"

PCAN serial "No CAN driver found"

Forum: Runtime 🇬🇧

Creator: transmin01

Created: 2023-09-14

Updated: 2023-09-20

transmin01 - 2023-09-14

Hi,
I am using a PCAN mini CAN board which has the Windows drivers installed on the target PLC. PCAN board can be seen in device manager. However, I am getting "No CAN driver found" error.
I have read the post https://forge.codesys.com/forge/talk/CODESYS-V2/thread/44aae19318/
and have uncommented the CmpPCANBasicDrv driver in the CodesysControl.cfg file in development PC and have copied it to the target PC.
Current CodesysControl.cfg file attached. Is there anything else I am missing?

Regards

CODESYSControl.cfg

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

transmin01 - 2023-09-14

Second question is, how do I determine the correct network ID for my Canbus config in Codesys? I have 2 CANbus ports on the target PC.

Regards Trevor

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

eschwellinger - 2023-09-20

which system are you using on the target system?
If this is Linux this is different - in compare to use it on Control Win

Last edit: eschwellinger 2023-09-20

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.