Hi,
though i am aware of the fact that Codesys doesnt not support Raspberry Pi 5 still i tried.
Codesys Installation : worked
Codesys Starting : worked
but right after start it stopped.
with Start Runtime it starts again but stops automatically after 5 seconds
is Codesys planned for Raspi 5?!
Regards...
Singh
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Does Ver. 4.12 support Raspberry Pi 5?
I have three issues. The first issue is that Codesys cannot detect the RPI 5 when I want to download the runtime. When assigning the IP Address manually then I can download the runtime. The second issue is that I cannot connect to the RPI to download a program. Sometimes the window pops up and it ask for the user credentials, but it is still not connecting.
The third issue is that I cannot connect to an ESP32 configured as a Modbus Slave with a Raspberry Pi 4B. I can connect to the ESP32 via a Radzio! Modbus Master Simulator.
I am also missing the function Write Holding Registers in the setup of the slave.
Are this known issues and when it will be solved?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
At the moment there are some changes on PI OS, which lead to problems with the PI5 an Pi runtime. I would use Arm SL or Arm 64 SL as runtime depending on which OS you have installed.
just use the CODESYS Installer and deploy the the Arm runtime.
Last edit: eschwellinger 2024-07-12
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
We are having issues right now, and I just stumbled on that post.
It seems to me you are saying your Linux ARM control is RPi 5-compatible, but the one you sell specifically for RPi is not. The fix you are proposing requires customers to re-purchase a CODESYS licence.
Is there a time frame for that to be fixed?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
though i am aware of the fact that Codesys doesnt not support Raspberry Pi 5 still i tried.
Codesys Installation : worked
Codesys Starting : worked
but right after start it stopped.
with Start Runtime it starts again but stops automatically after 5 seconds
is Codesys planned for Raspi 5?!
Regards...
Singh
Raspberry 5 4GB & 8GB
Runtime 4.10.0.0
32 Bit Raspbian Bookworm and tried 64 Bit too...Codesys is not runnung!
Last edit: Tyro 2023-12-06
Sure will come with 4.11.0.0 release.
Does Ver. 4.12 support Raspberry Pi 5?
I have three issues. The first issue is that Codesys cannot detect the RPI 5 when I want to download the runtime. When assigning the IP Address manually then I can download the runtime. The second issue is that I cannot connect to the RPI to download a program. Sometimes the window pops up and it ask for the user credentials, but it is still not connecting.
The third issue is that I cannot connect to an ESP32 configured as a Modbus Slave with a Raspberry Pi 4B. I can connect to the ESP32 via a Radzio! Modbus Master Simulator.
I am also missing the function Write Holding Registers in the setup of the slave.
Are this known issues and when it will be solved?
At the moment there are some changes on PI OS, which lead to problems with the PI5 an Pi runtime. I would use Arm SL or Arm 64 SL as runtime depending on which OS you have installed.
just use the CODESYS Installer and deploy the the Arm runtime.
Last edit: eschwellinger 2024-07-12
We are having issues right now, and I just stumbled on that post.
It seems to me you are saying your Linux ARM control is RPi 5-compatible, but the one you sell specifically for RPi is not. The fix you are proposing requires customers to re-purchase a CODESYS licence.
Is there a time frame for that to be fixed?
...4.13.0.0 release