Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
it says:
Installing the runtime package with CODESYS on the Linux device
Click Tools → Update CODESYS Control for <device> SL.</device>
I don't have the update option in my tools menu. I've tried it without opening a project, as well as with a project open that uses the control for linux SL as a device. I have found the update device option by right clicking on the device in the device tree, but this only lets me change the device the project is using not load the runtime on the linux computer.
Is there an updated instruction somewhere, or do I need to do some further preparation like install additional packages?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm running the 3.5.18.20 IDE, installed the control for linux SL package from the installer.
Following the directions here:
https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_install_runtime_on_controller.html
it says:
Installing the runtime package with CODESYS on the Linux device
Click Tools → Update CODESYS Control for <device> SL.</device>
I don't have the update option in my tools menu. I've tried it without opening a project, as well as with a project open that uses the control for linux SL as a device. I have found the update device option by right clicking on the device in the device tree, but this only lets me change the device the project is using not load the runtime on the linux computer.
Is there an updated instruction somewhere, or do I need to do some further preparation like install additional packages?
could you try to add the command in Tools-customize
Adding the command worked. I was able to deploy the runtime on an ubuntu server installation.
Thanks!