Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Is there a way to deploy Edge Gateway configuration (URL/certificate) without connecting with the IDE and manually configure the server and the rest?
Currently the application is loaded at end of line with an USB key, hooking up a PC and manually configure the unit for each machine would be a PITA...
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
That unfortunately requires hooking up a PC. 5 minutes vs 30 seconds, multiply that by 10 machines/day and the difference is 5 minutes vs 50, or 10% of a working day...
Activation at first connection (e.g. on the portal you see a "Hi I'm there" from the not-yet-registered machine and then activate it via some clicks) would be better.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Is there a way to deploy Edge Gateway configuration (URL/certificate) without connecting with the IDE and manually configure the server and the rest?
Currently the application is loaded at end of line with an USB key, hooking up a PC and manually configure the unit for each machine would be a PITA...
only this one:
https://store.codesys.com/en/service-tool.html
That unfortunately requires hooking up a PC. 5 minutes vs 30 seconds, multiply that by 10 machines/day and the difference is 5 minutes vs 50, or 10% of a working day...
Activation at first connection (e.g. on the portal you see a "Hi I'm there" from the not-yet-registered machine and then activate it via some clicks) would be better.