Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
How are the servo drives controlled? EtherCAT, step/dir pulses, other? CANOpen, 1 Mb/s, bus load 35%, cycle time 2ms. Another thought is that - if it's step/dir pulse based control - the pulses from the PLC to the drive are getting missed/lost at high frequencies? If that's the case then there would be multiple troubleshooting steps/corrections that could be investigated. Here, it seems to me that we are getting completely off track with the observed problem. You could try to create a simplified program I had already written this elsewhere. The program before being brought into machines was exhaustively tested in SW emulation and the problem did not occur. However, in emulation I was interested in checking other aspects of the process, not this specific one which is for real a correction made necessary after the fact. The part of the program that does this correction with the function mentioned in the topic, came up from its origins, but I didn't know or didn't think it was really useful. A scruple that later turned out to be necessary. However, for now I do not think I will spend any more time on this verification, already lacking any to do my normal. I remain amazed, however, that a function intended to correct the axis position with the motor in motion and that it should not interfere with this, in fact instead changes behavior as the motor speed changes. Mah! When you manually control the motor directly from the servo drive software at the speeds you are calling for, does it move precisely to the target position? The drive and motor have been working fine for about 10 years. In replacing the machine control system, I opted for CoDeSys where before there was something else. But this is not the subject of the problem. What I need to resolve is the fact that a clutch specially placed at a certain point can slip and, therefore, I have the undeniable need to phase the 'prime mover' to the mechanical position of the machine, detected by a cam for each turn, in order to properly stop at its optimum point. Which for now I have ruled out doing. In fact, if I really have to say, since we have now gone brutally OT, I originally thought that this clutch should only come into action in cases of extreme necessity, as happens in most trials. But this one, the way it is made, slips more easily than I could estimate and the servo-controlled 'prime mover,' and the machine, get out of phase, maybe by a little, but frequently, and when the machine work at it's high speed, (in fact all of the time), I can't adjust properly the 'prime mover' position at fly.
Last updated: 2025-01-18

Edgelogix-rpi-1000-cm4102032 SPI port connection to PiFace I/O Driver in CodeSys. ^{CODESYS Forge talk (Thread)}
Edgelogix-rpi-1000-cm4102032 SPI port connection to PiFace I/O Driver in CodeSys.
Last updated: 2023-08-21

Post by kreisfilho on Same program to more than one PLC ^{CODESYS Forge talk (Post)}
Hi, How can I assign a monitor (non touch) connected to a Raspberry pi (via HDMI) as visualization output?
Last updated: 2023-08-23

How to call the same program from library and get the vars updated. ^{CODESYS Forge talk (Thread)}
How to call the same program from library and get the vars updated.
Last updated: 2023-08-23

Post by lepewe4ka on Sysmac Studio to Codesys ^{CODESYS Forge talk (Post)}
Could you send me an example? I would like to generate a data structure using XML files.
Last updated: 2023-09-20

Post by lepewe4ka on Sysmac Studio to Codesys ^{CODESYS Forge talk (Post)}
Could you send me an example? I would like to generate a data structure using XML files.
Last updated: 2023-09-20

How to make Alarm table display timestamp with local time for alarms? ^{CODESYS Forge talk (Thread)}
How to make Alarm table display timestamp with local time for alarms?
Last updated: 2020-03-31

how to run the machine using CNC editor in codesys ^{CODESYS Forge talk (Thread)}
how to run the machine using CNC editor in codesys
Last updated: 2007-10-24

How does I make IO mapping possible to a new device. ^{CODESYS Forge talk (Thread)}
How does I make IO mapping possible to a new device.
Last updated: 2018-11-15

Is it possible to replace a table row header for a text in a text list? ^{CODESYS Forge talk (Thread)}
Is it possible to replace a table row header for a text in a text list?
Last updated: 2021-10-21

Mapping PLC world(code) to Hardware world(remote IO) with some OOP style ^{CODESYS Forge talk (Thread)}
Mapping PLC world(code) to Hardware world(remote IO) with some OOP style
Last updated: 2017-01-19

2D array , data move from a column to another column ^{CODESYS Forge talk (Thread)}
2D array , data move from a column to another column
Last updated: 2011-03-23

PLC (Lenze with CoDeSysy) as MODBUS TCP Slave to connect a 3th party touchscreen ^{CODESYS Forge talk (Thread)}
PLC (Lenze with CoDeSysy) as MODBUS TCP Slave to connect a 3th party touchscreen
Last updated: 2017-01-02

RPI How to login for a copy of the SD image ^{CODESYS Forge talk (Thread)}
RPI How to login for a copy of the SD image
Last updated: 2023-10-18

How to convert a standard robot program into an excutive list when a robot runs? ^{CODESYS Forge talk (Thread)}
How to convert a standard robot program into an excutive list when a robot runs?
Last updated: 2023-11-25

Post by mabac on Unable to load boot application on ARMv7 device restart ^{CODESYS Forge talk (Post)}
You may just need to create a boot application: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_creating_a_boot_application.html
Last updated: 2023-11-30

Post by jegerjon on Testing of Codesys program ^{CODESYS Forge talk (Post)}
I have a simulation function that toggle xSimActive. I map all IO variables to "IO GVLs" when xSimActive=0. I map IO corresponding SimIO GVL to "IO GVLs" when xSimActive=1. Then I write code for the simulation program that runs when xSimActive=1. Typically increase flow corresponding to pump speed, simulate tankfilling corresponding to flow and so on. I made a FC that require a correct code to activate simulation to avoid unintended activation by service dept. When comissioned remove any possibility to activate simulation. Super when officetesting and supporting service dept. + cheap as it requires no additional equipment, and it is easier to support customer later on in the life cycle as you can test proposed changes without setting up a testlab.
Last updated: 2023-12-07

Post by jegerjon on Testing of Codesys program ^{CODESYS Forge talk (Post)}
I have a simulation function that toggle xSimActive. I map all IO variables to "IO GVLs" when xSimActive=0. I map IO corresponding SimIO GVL to "IO GVLs" when xSimActive=1. Then I write code for the simulation program that runs when xSimActive=1. Typically increase flow corresponding to pump speed, simulate tankfilling corresponding to flow and so on. I made a FC that require a correct code to activate simulation to avoid unintended activation by service dept. When comissioned remove any possibility to activate simulation. Super when officetesting and supporting service dept. + cheap as it requires no additional equipment, and it is easier to support customer later on in the life cycle as you can test proposed changes without setting up a testlab.
Last updated: 2023-12-07

What the right way to update TCP/COM slave device holding registers ^{CODESYS Forge talk (Thread)}
What the right way to update TCP/COM slave device holding registers
Last updated: 2024-07-01

Data Sources Manager causing exception due to float or double type in OPC server ^{CODESYS Forge talk (Thread)}
Data Sources Manager causing exception due to float or double type in OPC server
Last updated: 2024-07-01

How to configure gateway for programming RPi 2B using Codesys ^{CODESYS Forge talk (Thread)}
How to configure gateway for programming RPi 2B using Codesys
Last updated: 2024-07-10

Post by ron-rp on Errors with VisuUserManagement library ^{CODESYS Forge talk (Post)}
I dont even need to clean, just compile again and the error disappears hopefullt someone knows what to do with it..
Last updated: 2024-07-14

C0244: No VAR_PERSISTENT list is part of the application to enter instance path for variable ^{CODESYS Forge talk (Thread)}
C0244: No VAR_PERSISTENT list is part of the application to enter instance path for variable
Last updated: 2024-07-17

Global variable access by Programms and Modbus Devices (attach device to bus) ^{CODESYS Forge talk (Thread)}
Global variable access by Programms and Modbus Devices (attach device to bus)
Last updated: 2024-07-18

Post by vladimirsmall on Send data to USB ^{CODESYS Forge talk (Post)}
Hello/ Need send some file ( for example Array of string) to USB. Which library need used for this. Thank you
Last updated: 2024-07-20

Sort by relevance or date