Post by joel214 on OPC-UA / Unterschied Symbolkonfiguration, IEC-Symbolveröffentlichung und Informationsmodell ^{CODESYS Forge talk (Post)}
Hallo liebe Community, im Rahmen einer Studienarbeit gilt es ein OPC-UA-Informationsmodell in eine existierende CODESYS-Steuerung zu implementieren. Dabei sind wir auf die Frage gestoßen welcher Unterschied zwischen den folgenden Objekten besteht: - Symbolkonfiguration (veraltet?) - IEC-Symbolveröffentlichung - Veröffentlichung über zuvor erstelltes Informationsmodell In unserem Verständnis erfüllen alle Objekte die Gleiche Aufgabe nur mit unterschiedlicher Vorgehensweise und Darstellung im OPC-UA-Server. Während durch die Symbolkonfiguration die Variablen und Instanzen über lange und verschachtelte Pfade abgelegt werden, wird durch die IEC-Symbolveröffentlichung ein Ordner im Pfad der Objekte erstellt. Dort sind die Variablen und Instanzen anschließend zu finden. Bei der Verwendung von Informationsmodellen hingegen, werden die Instanzen direkt unter den Objekten abgelegt. Für welchen Anwendungsfall ist welche Vorgehensweise am besten? Vielen Dank vorab und viele Grüße Joel
Last updated: 2024-04-09

Post by peterned on Programatically restart Codesys OPC UA server? ^{CODESYS Forge talk (Post)}
Hi, I'm using a Festo Codesys PLC (CPX-CEC-C1-V3), which is connected to a HMI panel. Both exchange data via OPC UA. Occasionally, the HMI stops displaying data, and looks as if there is no connection. If the HMI stops, the only way to make it work again is to restart the PLC. Restarting HMI has no effect. When the PLC is restarted, HMI starts working normally again. Is it possible to restart the OPC UA server from PLC code? I hope this will make fixing the HMI possible without a PLC restart. Thanks
Last updated: 2024-07-19

Post by alimans on OPC-UA Server, Symbol Set: Raise an error: Object reference not set to an instance of an object. ^{CODESYS Forge talk (Post)}
Hi everyone, I just created a very simple library without any code and, added it to my very simple project. after adding this library, I get an error when I try to open "Symbol Set" in "OPC UA Server" in "Communication Manager". Here is the code of my POU in the library: FUNCTION_BLOCK POU VAR eCommand : (CMD_NONE:=0, CMD_RESET:=-1) INT := CMD_NONE; END_VAR Attached is the error that I get. I also noticed that by removing the enumeration variable above (eCommand), I can open the "Symbol Set" again. Anybody has any idea why this error is raised and how could I use enumeration variables without error in "OPC UA Symbol Set"?
Last updated: 2024-08-08

Post by vformanek on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
Hey, I am facing the same problem. Basically UA Expert and other programs work fine with the login credentials. But codesys can not use them properly. I can see the server login to it manually but when I download the program and run the datasource never runs... Currently I am facing the same Error ID: 7012 and cant get it running properly.
Last updated: 2023-11-21

Post by anuj9326 on OPC-UA Client connection, Linux SL /Raspberry Pi ^{CODESYS Forge talk (Post)}
hello edwin i have did the same and i could connect the opc-ua server but i dont see anything in the resources tree, in the application i linked my variables to the symbol configuration but i dont see that in the uaexpert. if i use the same application with a non linux system i can get those variables values and see the complete tree structure. What could be the problem ?
Last updated: 2024-08-21

Post by anuj9326 on OPC-UA Client connection, Linux SL /Raspberry Pi ^{CODESYS Forge talk (Post)}
hello edwin i have did the same and i could connect the opc-ua server but i dont see anything in the resources tree, in the application i linked my variables to the symbol configuration but i dont see that in the uaexpert. if i use the same application with a non linux system i can get those variables values and see the complete tree structure. What could be the problem ?
Last updated: 2024-08-21

Post by thn-power on How to change OPC NodeId IdentifierType ^{CODESYS Forge talk (Post)}
Hi Yet another OPC UA question. When setting up a OPC server using "Communcation manager" (Symbol set and information model) in Codesys the NodeId is always given as "opaque" type. At least when browsing using UAExpert. Other standard OPC objects use numeric (or string) identifier, but for some reason my variables seems to get opaque/binary type. See attached photo. How can I change this? I can't see that this is a parameter in the CodesysControl.cfg. Can this be specified in the information model nodeset? And is it possible to specify the exact numeric or string NodeId for each instance? And on a related topic, is there a way to export the OPC server nodeId's with variable name so that it can be imported in a OPC Client? The .xml files in the project folder does not seem to contain the NodeId.
Last updated: 2024-09-20

Post by narius on OPC-UA object instances preexisting in imported xml information model ^{CODESYS Forge talk (Post)}
Hi all, is it possible to use object instances that are not instantiated by codesys itself, e.g. have been defined in UA-Modeler ? When I browse the plc with UA-Expert I see those instances, but I have not seen information in codesys or the web if these are writable in codesys. So far, I am under the impression, that it is not possible, but would like to hear from others. Also, is it correct, that it is not possible to create references inside codesys ? Thanks in advance and kr
Last updated: 2024-08-08

Post by thn-power on Updating OPC UA Core Nodeset on PLS ^{CODESYS Forge talk (Post)}
Hi After much trail and error I think I found the root cause to my OPC UA problem. The problem is that I cannot manage to build and download a program with a a custom OPC UA Information model. We use a Weidmueller WL2000 PLS, but the problem also exsist on the Win V3 PLC. Our custom information model is based on the latest versions of the OPC UA Core Nodeset v 1.05.03 (2023-09-20) and UA/DI nodeset 1.04.0 (2022-11-03) Those nodesets are installed in the Codesys Information Model Repository (3.5.19.6) However, when trying to build I get the following error. [ERROR] Untitled1: Communication Manager [Device: PLC Logic: Application]: The information model http://opcfoundation.org/UA/ is required by http://bos.org/ with a minimal publication date from 15.12.2023 but the device has only a model from 15.09.2021 installed. Probably the information model from 15.09.2021 is missing in the information model repository. [ERROR] Untitled1: Communication Manager [Device: PLC Logic: Application]: The information model http://opcfoundation.org/UA/DI/ is required by http://bos.org/ with a minimal publication date from 03.11.2022 but the device has only a model from 09.03.2021 installed. Probably the information model from 09.03.2021 is missing in the information model repository. Build complete -- 2 errors, 1 warnings : No download possible I think the problem is that the UA Core nodeset is implemented in the PLC firmware (at least that in Siemens S7), and that only includes the "old" nodeset from 2021-09-21 etc. So the question is, how (or if?) can I transfer the new nodeset to the PLS? I have created separate Information models under Communication manager with the newer code nodesets (UA and DI). But it seems that the compiler does not recognize them being excising, neither in the Codesys IDE or on the PLC. Would have guessed that this is a common issue, sine many manufacturers use the latest versions of the OPC UA standard, and that it would be a solution to the problem.
Last updated: 2024-09-20

Post by janderson on OPC UA Server limitations, large array crashes runtime ^{CODESYS Forge talk (Post)}
when using an array of structs, the runtime crashes. but when using an array of LREALS, it'll do 100k at least
Last updated: 2023-08-23

Post by yr00 on OPC UA datasource low read frequency ^{CODESYS Forge talk (Post)}
Hello everyone, I am trying to test the OPC UA client feature in Codesys. My setup is the following; I have a Codesys simulation/ visualization running on Control Win V3. My OPC UA server is hosted on a Siemens 1518 PLC using PLCSim Advanced. The setup is completely virtual so there are no really PLCs. Everything is on my laptop. Writing data from the Codesys simualtion to the server is very quick. I have a PLC program running on another 1500 PLC which reads data from simulation via the server, and changes in the simulation (e.g. button pressed) appear within hundreds of miliseconds if not tens of miliseconds in my PLC program. However, when it comes to reading data from the OPC UA Server by Codesys, it taks around 1-2s. I connected a UAExpert client and it gets update very quickly so I am fairly sure the problem is with Codesys. I have tried changing the update rate in datasource -> General and Diagnosis, but it doesn't seem to have an effect. Do you guys have any suggestion on what I can do?
Last updated: 2023-08-29

Post by chris12345 on OPC UA datasource low read frequency ^{CODESYS Forge talk (Post)}
Hi yr00, the default sampling interval is set to 1s. you can generate your own client settings, this link should help you:- https://content.helpme-codesys.com/en/CODESYS%20Communication/_comm_use_dynamic_opc_ua_server_comm_settings.html
Last updated: 2023-09-13

Post by chris12345 on OPC UA datasource low read frequency ^{CODESYS Forge talk (Post)}
Hi yr00, the default sampling interval is set to 1s. you can generate your own client settings, this link should help you:- https://content.helpme-codesys.com/en/CODESYS%20Communication/_comm_use_dynamic_opc_ua_server_comm_settings.html
Last updated: 2023-09-13

Post by vincentd on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
I had some help from Codesys to debug this problem. It seems there was a problem within the target (a bug?). I only used for a proof of concept. Possibly it will work with a new version of the target
Last updated: 2023-11-21

Post by riccardo on How to allow a user to handle certificates without access to sourcecode? ^{CODESYS Forge talk (Post)}
It would be usefull to me too, I would need to manage HTTPS and OPC UA certificate without perform the access to the whole sorce code project
Last updated: 2023-11-27

Post by eschwellinger on OPCUA Ctrl-Node fehlt ^{CODESYS Forge talk (Post)}
..dann mal im WBM alles deaktivieren, da der OPC UA Server ja direkt im PFC200 SL RUntime integriert ist und nicht über die WBM Oberfläche zu konfigurieren ist.
Last updated: 2023-12-05

Post by timvh on Import OPC UA model to Codesys ^{CODESYS Forge talk (Post)}
See the attached pdf with some notes (screenshots) which I prepared for one of our customers to help them get going. Hopefully this helps for you too.
Last updated: 2024-03-12

Post by lordsteve on OPC UA certificate upgrade ^{CODESYS Forge talk (Post)}
Hi, I have the same issue. It should be possible to create a certificate without using Codesys IDE. The functionality of the security agent could be handled in some fb. Can anyone here give the right hint?
Last updated: 2024-03-15

Post by simonh on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
Hello, did you find the solution for the communication?Has the communication between the two been successful? if yes, can you please share me your solution since i have similar issue now. Thanks.
Last updated: 2024-04-04

Post by flavinhofh on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
ah ok, I will keep trying, I already removed all security from the Server side. I'm new on codesys and I don't know yet how to implement the certificates, but I will find out and also try. thanks for your reply.
Last updated: 2024-04-11

Post by stiller on OPC-UA ApplicationUri / ProductUri ^{CODESYS Forge talk (Post)}
Hello! Is there a way to change ApplicationUri and ProductUri of the OPC_UA server? I can not find any information about it. Does someone have a clue? Thank you in advance!
Last updated: 2024-05-10

Post by andreag0 on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
Good to know. I am looking for some soluction to avoid PLC Handler and OPC-UA. Thank you.
Last updated: 2024-06-14

Post by climblinne on Calling OPC UA Methods from UaExpert ^{CODESYS Forge talk (Post)}
So I found the mistakes. First I forget to deactivate "Use access rights defined in the user management". And also I used in "UaModeler" a project name with whitespaces, which lead to a wrong namespace name.
Last updated: 2024-07-11

Post by elayaraj on Codesys Soft PLC OPC UA server ^{CODESYS Forge talk (Post)}
Hi, You may refer to this below video link to get some idea.. hopefully it works https://www.youtube.com/watch?v=RBMff-IlPA4
Last updated: 2024-08-30

Post by joelwright24 on codesys sp20 opcua not working ^{CODESYS Forge talk (Post)}
I also had this problem connected CODESYS to UAExpert for the first time. In the device, I need to allow anonyomous log in. Follow steps 14 - 17 of the following tutorial: https://docs.factoryio.com/tutorials/codesys/setting-up/codesys-opc-ua-sp17/#creating-the-project
Last updated: 2024-09-11

Sort by relevance or date