Post by ben1 on How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Post)}
Yeah that is odd - sometimes you have to do what you have to do unfortunately. Have you tried sending consecutive bits in the word instead - ie. instead of [0].0. [1].0, [2].0 etc, send [0].0,[0].1, [0].2 etc. ?
Last updated: 2024-11-17

Post by arwie on Wish: CODESYSControl.cfg - again ^{CODESYS Forge talk (Post)}
Agree! Me and my customers are buying SL Licences from the store but we don't get proper documentation of the runtime! Only a few hints of the entries in CodesysControl.cfg are spread all over the Internet.
Last updated: 2024-11-26

Post by andrax on Need help to get RS-485 signal in Cosesys . ^{CODESYS Forge talk (Post)}
You need an SPI driver for the board. If there is nothing on the net, you will have to write one yourself
Last updated: 2024-12-03

Post by rh-cs-234 on Codesys Tools Update Raspberry ist nicht vorhanden aktualisieren im Geraete ansicht geht auch nicht ^{CODESYS Forge talk (Post)}
Hallo Daniel, da wurde in der Runtimeversion 4.14.0.0 etwas geändert. Du findest jetzt die Funktion zum Updaten des RasPis unter Tools/Control Sl ausrollen Grüße Reinhard
Last updated: 2024-12-13

Post by dogulas on OPC UA C# client connecting to OPC UA CODESYS server ^{CODESYS Forge talk (Post)}
Ok, I have a simple test environment. From C#, using OPC UA, I can read DINTs, write DINTs, read Structs, but when I try to write a struct I get BadNotWritable. I am using Communication Manager, OPC UA Server, and IEC Symbol Publishing. I have a struct defined with one single DINT in it. The instance of the struct is in GVL. The struct is marked read/write in IEC Symbol Publishing. Any ideas? Pointers are welcome. public static async Task WriteStructA(byte[] structAData) { if (_session == null) throw new Exception("session is null"); // create a RequestHeader RequestHeader requestHeader = new RequestHeader { Timestamp = DateTime.UtcNow, TimeoutHint = 30000 // timeout in milliseconds }; // create an ExtensionObject to wrap the value to be written ExtensionObject extensionObject = new ExtensionObject( new ExpandedNodeId("GVL_StructA", 5), structAData ); // create a WriteValue object to hold the value to be written WriteValue writeValue = new WriteValue { NodeId = _structANodeId, AttributeId = Attributes.Value, Value = new DataValue(extensionObject) }; // put the WriteValue object into a WriteValueCollection object WriteValueCollection writeValueCollection = new WriteValueCollection() { writeValue }; // perform the write operation asynchronously WriteResponse writeResponse = await _session.WriteAsync( requestHeader, writeValueCollection, CancellationToken.None ); // check the result of the write operation if (writeResponse.Results[0] != StatusCodes.Good) throw new Exception("Write failed: " + writeResponse.Results[0]); }
Last updated: 2024-12-17

Post by faceplant on Comparison via CLI is broken ^{CODESYS Forge talk (Post)}
Hello! I am trying to compare 2 projects via the --compare CLI option. In the docs for the --compare option, it describes the usage as .\CODESYS.exe --compare "project path 1" "project path 2". I store my projects in WSL2 on my windows machine. Since CODESYS is happy to open those projects via a path like \\wsl.localhost\home\project.project. So, to compare, I use the command .\CODESYS.exe --compare "\\wsl.localhost\home\prog1.project" "\\wsl.localhost\home\prog2.project". This results in CODESYS just opening the project and starting, not comparing the two projects. No errors are thrown, and I know the paths are correct since I can open both independently in CODESYS, and I can compare them manually through the CODESYS UI. I have also tried moving my projects to the Windows 11 OS and still have the same issue. CODESYS opens the project and does not actually compare them. I am using CODESYS profile v3.5 sp20 patch 1. What is the correct way to compare 2 projects using the --compare CLI option?
Last updated: 2024-12-18

Post by gseidel on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hi Imdat, thanks for your effort! We could reproduce the error and will fix it in the next release (4.18.0.0). Best regards, Georg
Last updated: 2024-12-19

Post by yannickasselin on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Not sure this will help you but I had the same issue and was able to activate the license on a Windows PC using the Web Depot in a web browser. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_installing_license.html
Last updated: 2025-01-08

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
CoDeSys 3.5.19.7 Target Berghof MX6 In a simple SoftMotion programme with two stepperless modular axes from CMZ, one is simply controlled in speed, but a spot must perform a positioning. I use the function MC_SetPosition() both to reference the axis at power-up and also to correct the actual position to a fixed machine reference detected with proximity. The function has only one instance and I actually use a booelan variable to control the ‘Execute’ input. Well, I cannot correctly change the axis position on the fly if it is running at high speed. The servomotor works in a speed range between 0°/s and 720°/s, (gearbox output with a 1:6 ratio). As long as the servomotor is operating at speeds below about 400 °/s, the function is able to correct the position correctly even when forcing values far apart, but at high speeds, from 400 °/s upwards, the correction no longer takes place. For example, trying to correct the position of 280° into 300° with absolute mode, the axis that is moving at speed actually shifts the position by a few degrees, not the expected 20. I don't understand why with the servo drive running slowly the position shift occurs correctly, while increasing in speed it no longer works.
Last updated: 2025-01-09

Post by andrax on Bosch BME 280 bzw 688 Sensor per I2C Bus steuern und Daten in Codesys verarbeiten ^{CODESYS Forge talk (Post)}
Die Geräte Bibliothek von Stefan Dreyer ist dafür gedacht, um Treiber für deine Sensoren zu erstellen, damit sie an einem MUX-Board betrieben werden können. Auch ist ein Betrieb ohne MUX-Board möglich. Der Aufbau ist relativ einfach und besteht aus folgenden Komponenten: -Initialize (hier wird die .devdesc.xml eingelesen) -BeforeWriteOutputs (ruft initDevice auf und ist für ausgehende Signale gedacht) -initDevice (initialisiert den Sensor) -AfterReadInputs (Selbsterklärend, Werte einlesen und Signalkonversation) Bei meinen Sensoren habe ich es immer so gemacht. Zuerst habe ich mit die .devdesc.xml gebaut bzw. eine Vorlage umgeschrieben, wobei Parameter 1-10 für ein Mux-Board reserviert sind. In der .devdesc.xml definierst du alle wichtigen Parameter für den Sensor. Danach schreibst du die Initialize und liest die Werte ein. InitDevice ist Fleißarbeit. Für die meisten Sensoren liegt immer ein Pythonscript oder was in C bei. Du gehst die Scripte durch und baust es in Codesys nach. Im letzten Schritt baust du die AfterReadInputs. Signale einlesen und Conversation. Du solltest dir auch ein I2C-Logic Analyzer zulegen. Da Teil ist sehr hilfreich um die I2C Kommunikation mitzulesen. Wenn es irgendwo klemmt, siehst du sofort an welcher Stelle du suchen musst. Ich hab hier den AZ-Delivery Logic Analyzer! Grüße Andre
Last updated: 2025-01-11

Post by timvh on Read codesys version in the codesys application ^{CODESYS Forge talk (Post)}
VAR RuntimeVersion: VERSION; END_VAR RuntimeVersion := __SYSTEM.Constants.RuntimeVersion; PS, when I call the SysTargetGetVersion on a Control Win, I get the value 50664488 = 16#03051428 equals version 3.5.20.40
Last updated: 2025-01-17

Post by alkneer on Codesys Tools Update Raspberry ist nicht vorhanden aktualisieren im Geraete ansicht geht auch nicht ^{CODESYS Forge talk (Post)}
Wo ist es in diesem Tool möglich, die Umschaltung (SingleCore/MultiCore/MultiCore64) zu machen ???
Last updated: 2025-01-22

Post by timvh on Can't find the safety manual in the documentation ^{CODESYS Forge talk (Post)}
I also couldn't find it at first, but please check this: C:\Program Files\CODESYS ..your version..\CODESYS\CODESYS Virtual Safe Control SL\Delivery\Manuals\
Last updated: 2025-01-23

Post by smartcoco on OPC server in "Communication manager" ^{CODESYS Forge talk (Post)}
I don't recommend using 'Communication Manager'. Under 'Communication Manager', the 'NodeId' type of OPC UA can only be of type 'OPAQUE'. This will bring compatibility issues to the development of the upper computer.
Last updated: 2025-01-24

Post by fless on Help with __SYSTEM.VAR_INFO ^{CODESYS Forge talk (Post)}
to get the address just use ADR( ) variables defined in a VAR_IN_OUT block are references pointing to the passed variables. VAR_IN_OUT MyVar: bool; END_VAR VAR adrMyVar: __XWORD; END_VAR adrMyVar := ADR(MyVar);
Last updated: 2025-01-26

Post by runtimevictor on virtual plc vPLC configure nics ^{CODESYS Forge talk (Post)}
Hello, When I add 2 nics in vPLC this happens to me..., why is it? If I just put one of the two NICs, the vPLC runtime instance starts running correctly...
Last updated: 2025-02-02

Post by mucleus on How to implementation Gantry Robot path. ^{CODESYS Forge talk (Post)}
Hello. How can I move path like in the attached image using CODESYS's robotics library? (MC_MoveLinearAbsolute, MC_MoveDirectAbsolute, MC_MoveCircularAbsolute, etc.) Please help me. Thanks.
Last updated: 2025-02-13

Post by george32 on TCP Server ^{CODESYS Forge talk (Post)}
Thank you for your advice Rinie, I have tried to follow this example but found one problem.When I disconnect with Hercules the system does not acknowledge the lost of its connection this could result in critical errors. Because of this error I am trying to implement the Syssocket library. With this library I am having a problem which I could not solve. I have the following code: ip_adres : STRING :='0.0.0.0'; port : WORD := 5000; iStep : INT := 1; // Socket information Socket_handler : SysSocket_Interfaces.RTS_IEC_HANDLE; Socket_handler_result : SysSocket_Interfaces.RTS_IEC_RESULT; Socket_adress : SysSocket_Interfaces.SOCKADDRESS; Addres_Convert : SysSocket_Implementation.RTS_IEC_RESULT; // Bind information Bind_handler : SysSocket_Interfaces.RTS_IEC_RESULT; // Listener Information Listener_handler : SysSocket_Interfaces.RTS_IEC_RESULT; Addres_Convert := SysSocket_Implementation.SysSockInetAddr(szIPAddress:= ip_adres,pInAddr:= ADR(Socket_adress.sin_addr)); Socket_adress.sin_family:= SysSocket_Interfaces.SOCKET_AF_INET; Socket_adress.sin_port := SysSocket_Implementation.SysSockHtons(usHost:= port); CASE iStep OF 1: // Create Socket Socket_handler :=SysSockCreate( iAddressFamily :=SysSocket_Interfaces.SOCKET_AF_INET, diType:=SysSocket_Interfaces.SOCKET_STREAM, diProtocol:=SysSocket_Interfaces.SOCKET_IPPROTO_TCP, pResult:=ADR(Socket_handler_result)); IF Socket_handler = SysSocket_Interfaces.RTS_INVALID_HANDLE THEN iStep := 1; ELSE iStep := 2; END_IF 2: Bind_handler := SysSocket_Implementation.SysSockBind( hSocket:=Socket_handler, pSockAddr :=ADR(Socket_adress), diSockAddrSize:=SIZEOF(Socket_adress) ); 3: Listener_handler := SysSocket_Implementation.SysSockListen( hSocket :=Socket_handler, diMaxConnections :=1); END_CASE When I am trying to get this working, the SysSockBind function gives a value of 16#207 which means adress already in use. I find this weird because of the IP-adress of 0.0.0.0. I think I am converting the Ip-adress in the wrong way, but the code does not give a error arround this. So therefore I cannot find the solution to this problem. I hope someone could help me with this problem. Thanks in advance George
Last updated: 2025-02-20

Sort by relevance or date