Post by arrotek on Codesys HMI Redundancy ^{CODESYS Forge talk (Post)}
Is there a way to run Codesys HMI on two different PC's and have the web visu clients fail over to the HMI instance that is wokring or running?
Last updated: 2024-05-30

Post by jaspergain on Non-existing identifiers ^{CODESYS Forge talk (Post)}
Hi, I'm using SP19 Patch 5, the software is also updated from SP18 Patch 5, I forgot to mention this. I will try a newer patch to see if it fixes the issue. Thanks for your help.
Last updated: 2024-05-30

Post by nano on Is it possible to profile builds? ^{CODESYS Forge talk (Post)}
pls check whats gookg on with antimalware-service-executable during the build most of my problem are directly connected to that "great" microsoft feature
Last updated: 2024-06-06

Post by totorovic on IO-LINK Package - new license model ^{CODESYS Forge talk (Post)}
Thank you for your answer. Finally I don't confirm that it used to work before. It seems that the IO-link Package is needed is you want to configure the network, but you don't need it if you use generic IO-link devices.
Last updated: 2024-06-06

Post by paulg on CODESYSControl_User.cfg - link to documentation? ^{CODESYS Forge talk (Post)}
Is there somewhere in the Codesys help files that generally details what configuration options are available for this file, and what details it logs regarding the configuration file? Or is that going to differ by libraries being used? Thanks!
Last updated: 2024-06-11

Post by installwhat on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
Maybe your question makes sense but I don't see it. Maybe you should rephrase and add a lot of detail
Last updated: 2024-06-13

Post by eschwellinger on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
your device in the device tree is Pi 64 online you have Pi MC (32bit) - update device in the device tree to Pi MC then it will work.
Last updated: 2024-06-23

Post by mp9876 on Problem using MeasureFrequence FB ^{CODESYS Forge talk (Post)}
Hi everyone, new at Codesys and PLC programming in general. I am using Codesys Win V3.5 SP20 I would like to measure an encoder's frequency output (obtaining that pulse train from Factory IO) and intended to use the MeasureFrequence FB (Intern/CAA/Utilities/CAA Mathematics/3.5.19.0). As mentioned in the title what I need to measure is low frequency, such as lower than 40hz (a cycle every 25mS) or so; I could even go lower frequency if required as this is for test purposes) therefore I am not expecting problem measuring a low frequency with that FB The library in question appears to be installed as I can retrieve it from the Library Repository. I can also see it from the Device's Library Manager. Problem arises when I am trying to instantiate this particular FB. I go like this: VAR MeasF:MeasureFrequence; END_VAR Please note that as soon as I start typing the "MeasureFrequence", the MeasureFrequence comes out as a viable option in auto-typing; seems to indicate that the FB is recognized somehow. But there is no way I can compile this as it comes back with the following: C0046: Identifier 'MeasureFrequence' not defined. Tried to rename that to ABC instead of MeasF; same issue. Possibly that the library is not properly installed ? Placeholder ? I would greatly appreciate a bit of guidance if possible. Thank you and regards, Mike
Last updated: 2024-06-24

Post by ahmed-abohelal on SysComRead Timeout Parameter ^{CODESYS Forge talk (Post)}
Hello I was facing the same problem i have to increase the timeout since the unit looks like to be in us SysComread(hCom:=hCom,pbyBuffer := ADR(readBuffer[0]),ulSize:=128,ulTimeout:=3000000,pResult:= ADR(readRes));
Last updated: 2025-10-22

Post by vtec35 on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
i have update the package 4.13 n the computer and install all update for all package, now impossible to start codesys... when i start to open any project i have a message invalid project...
Last updated: 2025-10-26

Post by davidbo on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Post)}
I have done: systemctl stop dhcpcd sudo ip addr flush dev eth0 sudo ip link set eth0 up but a call to SysSockSetIpAddressAndNetMask does not give the eth0 an IP address Why?
Last updated: 2025-11-04

Post by jonasz on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
Thank you for your response. Is there documentation for the commands? I spent a lot of time trying to figure this out. I have a potato computer at home, so I'll have to test this later.
Last updated: 2025-11-21

Post by dinesh-vamtec on RETAIN PERSISTENT only stored at gracefully shutdown? ^{CODESYS Forge talk (Post)}
I have an idea to save the persistent variable. Currently in testing processs. If testing completed I share the solution to you.
Last updated: 2025-11-26

Post by gseidel on SMC_ERROR.SMC_AXIS_NOT_READY_FOR_MOTION when using Drive Virtual ^{CODESYS Forge talk (Post)}
Hi ducng, you need to make sure that MC_Power.Status is TRUE before you give a rising edge to MC_MoveRelative.Execute. (This is the same for virtual and real axes). Best regards, Georg
Last updated: 2025-11-27

Post by davidbo on License problem with Raspberry Pi ^{CODESYS Forge talk (Post)}
To simplify your problem you shall not select dongle and get dongle errors. Do as shown In some cases you need 2 different licenses depending on the metrics. And yes the system gives not always give proper error messages when you try to reinstall a license
Last updated: 2025-12-01

Post by cnicht on Visu File Transfer with multiple files ^{CODESYS Forge talk (Post)}
I have a question for the Visu File Transfer Example. Is it possible to transfer more than one file from the plc to the webvisu with only one button click? How can i realize it?
Last updated: 2025-12-03

Post by cnicht on Visu File Transfer with multiple files ^{CODESYS Forge talk (Post)}
I have a question for the Visu File Transfer Example. Is it possible to transfer more than one file from the plc to the webvisu with only one button click? How can i realize it?
Last updated: 2025-12-03

Post by durallymax on How to use MQTT in CODESYS Control Win V3 ^{CODESYS Forge talk (Post)}
With the IIoT library/license or the one provided by the hardware OEM. Several examples online of how to use the MQTT Client SL library.
Last updated: 2025-12-12

Post by timvh on High resolution displays with 150% scaling causes CodeSys IDE to be blurry ^{CODESYS Forge talk (Post)}
Instead of using scaling of 150%, can't you adjust your diplay resolution (Windows+i keys, then go to System > Display settings)?
Last updated: 2026-01-07

Post by shivsrikakolum on SOFTMOTION - Error 34 when trying to execute and SMC_DI_AXIS_Error ^{CODESYS Forge talk (Post)}
I am using a Trio DX3 drive DC bus Unused , so I can control from SM3 Axis Datatype but as soon i try to Jog or Enable the MC_ Blocks It shows Error 36 can some one please the settings for this .
Last updated: 2026-07-07

Post by timvh on codesys installer deletes itself instead of updating ^{CODESYS Forge talk (Post)}
Do you use 32bit versions of CODESYS? Why not 64bit? And just use the installer to manage your various versions and add-ons. Optionally use separate repositories to prevent possible library conflicts.
Last updated: 2026-08-10

Post by lphu on HELP US TO ACCESS CODESYS WITH IPC KOSSI ^{CODESYS Forge talk (Post)}
Dear Sir We would like to access programing with IPC Kossi while we dont have Pass word . Please kindly help us the soluttion can do that Thanks' Huu Phu
Last updated: 2026-09-10

Post by lphu on HELP US TO ACCESS CODESYS WITH IPC KOSSI ^{CODESYS Forge talk (Post)}
Dear Sir We would like to access programing with IPC Kossi while we dont have Pass word . Please kindly help us the soluttion can do that Thanks' Huu Phu
Last updated: 2026-09-10

Post by clockben on Python script to add libraries to project ^{CODESYS Forge talk (Post)}
Hello, I have the same issue — some libraries aren’t resolved. When I load the libraries manually and delete them, reloading with the script works fine afterward. Have you found a solution since then? Many thanks in advance
Last updated: 2025-11-11

Post by emmieturner on Which Lib to use, connect to a socket with URL instead of IP address ^{CODESYS Forge talk (Post)}
hi, maybe Net Base Services https://forge.codesys.com/prj/codesys-example/nbs/home/Home/ https://geometrydashlite.online Thank for sharing
Last updated: 2025-11-16

Sort by relevance or date