Post by andrax on Mux I2C ^{CODESYS Forge talk (Post)}
the TCA9548a does not work in Codesys. In Pyton this is only queried once and in Codesys cyclically. Of course you can also insert a terminating resistor in each port, then you should have no problems. I use this one: https://botland.de/8-bit-multiplexer/12723-qwiic-mux-breakout-8-kanal-modul-mit-i2c-multiplexer-tca9548a-sparkfun-bob-16784-5904422341428.html You can simply set the library to the latest version. You do not need Oscat. Do you need an example project for the BMP280?
Last updated: 2024-01-02

Post by andrax on Mux I2C ^{CODESYS Forge talk (Post)}
the TCA9548a does not work in Codesys. In Pyton this is only queried once and in Codesys cyclically. Of course you can also insert a terminating resistor in each port, then you should have no problems. I use this one: https://botland.de/8-bit-multiplexer/12723-qwiic-mux-breakout-8-kanal-modul-mit-i2c-multiplexer-tca9548a-sparkfun-bob-16784-5904422341428.html You can simply set the library to the latest version. You do not need Oscat. Do you need an example project for the BMP280?
Last updated: 2024-01-02

Post by eschwellinger on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
we need some logfiles from the edge gateway /etc/Gateway.cfg [CmpLog] CmpEdgeGateway.Filter=0xFFFFFFFF Logger.0.Name=/tmp/codesysedge.log Logger.0.Filter=0x0000000F Logger.0.Enable=1 Logger.0.MaxEntries=100000 Logger.0.MaxFileSize=5000000 Logger.0.MaxFiles=1 Logger.0.Backend.0.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Type=0x314 ;Set the timestamp to RTC and does the scan via Automation Server show the plc?
Last updated: 2024-01-09

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello, I couldn't figure what/where the issue was, so I deleted everything from automation server and reinstalled the edge gateway and did the process again. It worked for about a month and then it stopped working again. It presents the same symptom, edge gateway is online but I can't connect to the PLC. Any idea of what could be the issue? Thank you!
Last updated: 2024-01-09

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hi Edwin, The PLC is already in the automation server so nothing happens when I scan the network, however the PLC show offline (not connected). Please see logs below. [CmpLog] Logger.0.Name=codesysedge.log Logger.0.Filter=0x0000000F Logger.0.Enable=1 Logger.0.MaxEntries=100000 Logger.0.MaxFileSize=1000000 Logger.0.MaxFiles=1 Logger.0.Backend.0.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Type=0x314 ;Set the timestamp to RTC Thank you!
Last updated: 2024-01-09

Post by sturmghost on Visualization using methods and cyclic ST-calls ^{CODESYS Forge talk (Post)}
I found a way to do it: You can use, for example, the text variable property of any visualization element and call a function in it. Example: Write a test POU as a function (FUN), like MyTestFun which need a boolean Variable as an input value. Now write into the text variable property: MyTestFun(bBooleanValue) Thats it. The function is called at each visu_task cycle.
Last updated: 2024-01-22

Post by wiresplus on Cannot get INT_TO_TIME working ^{CODESYS Forge talk (Post)}
Hello, I have a simple TON timer. It is watching prime loss for a pump. The operator can set the delay via the HMI, it is an integer (seconds) As the TON uses milliseconds, we then multiply the entry by 1000 to get seconds. Seems simple, but... VAR PrimeTimer : TON; primetime : INT; END_VAR PrimeTimer(in:=State>0 AND FlowRate<MinimumFlow,pt:=INT_TO_TIME(primetime *1000)); For an entered 15 seconds (VAR primetime:=15;) the timer reads 49d17h2m26s760ms !!!! What am I doing wrong?
Last updated: 2024-01-26

Post by thomas-moba on "sudo"-Befehle über die Funktion "SysProcessExecuteCommand2" ^{CODESYS Forge talk (Post)}
Hello, I need to execute "sudo" commands via CoDeSys 3.5 SP 19 P5 using the "SysProcessExecuteCommand2" function. Commands without sudo are no problem, but as soon as sudo is used in a .sh or a single command, it does not work. Command=AllowAll is entered under "SysProcess" in CODESYSControl.cfg. Nevertheless it does not work. Does anyone know what the problem could be? Greetings, Thomas
Last updated: 2024-02-01

Post by matt-s on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
I have not gotten to the bottom of this yet no. I have double check that the variables are correct linked. When online with the program I can see the button and rung going true for the move instruction, yet it does not change. Forcing the bit in the program does change the value in Groov View. I am kind of at a loss here, especially since the other POU(For the pumps) does the same thing fine.
Last updated: 2024-02-02

Post by tvm on VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined ^{CODESYS Forge talk (Post)}
I'm getting this error on one of my projects. Searching for it I came across this https://www.codesys.com/fileadmin/data/Images/System/Releaseinformation/Patch-Note-CODESYS-Visualization-4300.html which says it was a bug VIS-1394, fixed in Visualization 4.3.0.0. I'm using a previous visu version, what is the cause of this error, and what can be done to work around it?
Last updated: 2024-02-08

Post by goki on WAGO RS485 (753-652) on a 750-362 ^{CODESYS Forge talk (Post)}
hi guys Maybe someone can help me in this case. Im working with codesys 3.5 with an PFC200 (750-8212) with a Modbus TCP conection to the 750-362. On the 750-362 i have a 4DO, 8DI and a RS485 interface card. the 4DO and 8DI cards a working fine but im strugling with the rs485 card. Does someone have a example for this?
Last updated: 2024-02-08

Post by thomasrohnerch on Color Change for Symbols not working ^{CODESYS Forge talk (Post)}
I have some Symbols from the Visualization Toolbox on my Target Visu on the Computer. I tried many Symbols, mainly Arrows. I'm able to control the visibility with condition e.g. "GVL.actual_testvalues.speed <= 0" But I can't do "Toggle color" with boolean GVL.b_toggle_color. Neither "TRUE" nor "FALSE" does change anything. Is this a known issue? I'm using CODESYS V3.5 SP19 Patch 5 + (64-bit). See attached file with more Version-Info. I'm currently using Style 6, Gradient axial 2, 3.5.12.0. I had the same issue with Default 3.5.16.0.
Last updated: 2024-02-08

Post by otdeveloper on IEC 61499 ^{CODESYS Forge talk (Post)}
It is being worked on by many companies and its even-driven function blocks seem like a natural evolution of the object oriented industrial programming I have seen Gary Pratt (author of the Book of CODESYS and much more) so expertly implement and explain. I would expect CODESYS to have this front and center on their sights and, if they do not, I would be very interested in learning why.
Last updated: 2024-02-09

Post by ferrim on IEC 61499 ^{CODESYS Forge talk (Post)}
IEC 61499 is probably something more complex than what you have correctly said so the prospects are interesting but we cannot ignore that it came out almost 20 years ago and has not won many hearts. I started to explore this world with a PLCnext controller because I love these devices based on RT Linux and Codesys is somehow usable with them but I have made little progress and I feel like inside a nutshell in the middle of the sea ;-) Gary's voluminous and precious book is always on my desk...
Last updated: 2024-02-10

Post by marlutec on [ERROR] The PLCopenXML import is not possible because Device not found. Type: 89, Id: 0000 0005, Version: 3.5.10.0 ^{CODESYS Forge talk (Post)}
Hello every one. Now i'm instaling a Weintek cMT2108x2(v2) with IR-ETN40R. When I start to import the archive content the code of I/O remote IR-ETN40R, ocurred this error. [ERROR] The PLCopenXML import is not possible because Device not found. Type: 89, Id: 0000 0005, Version: 3.5.10.0 Can someone help me? Marcos Gentil, from Brazil.
Last updated: 2024-02-15

Post by martinla on New Codesys Library Dependencies ^{CODESYS Forge talk (Post)}
When creating a new Codesys library, I am getting 2 errors for missing libraries. I can see that I am using newer versions of these in the library manager (3.5.17.0 and 3.5.19.0 opposed to 3.5.8.0 and 3.5.7.0 stated in the errors). IDE Version is V3.5 SP19 Patch 6. The "Download missing libraries..." button in Messages list is not doing anything. Why is it looking for older versions of these libraries? Can this be fixed by using the newer versions? How can I download & install the older version of these libraries?
Last updated: 2024-02-29

Post by nano on Is there any support for I2C on Raspberry Pi? ^{CODESYS Forge talk (Post)}
hello jdj this question can be answered well with a pretty good forge documentation: https://forge.codesys.com/drv/io-drivers/doc/Generic/ u r also able to create in codesys directly an iec-code by using the i2c-interface as driver using the codesys ide and st depending on the stepperdriver, used in yöur hat, its possible that an driver is already available in the device-repository. which mcp-device is used on the hat?
Last updated: 2024-03-01

Post by alexgooi on Disable OPC-UA server ^{CODESYS Forge talk (Post)}
Dear Forum, I recently updated to the newest Codesys IDE (3.5 SP19 patch 5) The program wouldn't download cause of the amount of OPC-UA server tags (see picture) I'm not planning on using the OPC-UA server and therefore I unchecked the "Support OPC-UA features" checkbox in the symbol configuration. But this didn’t solve the issue of the OPC-UA server exceeding its license. How can I disable the OPC-UA server while still maintaining the symbol configuration. Thank you in advance Alex
Last updated: 2024-03-01

Post by camilloo on Control for Linux SL on Ubuntu Core ^{CODESYS Forge talk (Post)}
(dhumphries) I followed your advice and tried it on Ubuntu Server. Was a good choice. Your material was also very helpful :). Thanks for Your help! I no longer have problems connecting to Ubuntu. However, I still cannot install Virtual PLC. I'm currently getting a missing path message: "C:\Program Files\CODESYS 3.5.19.60\CODESYS\CODESYS Virtual Control for Linux SL\Delivery\virtuallinux\VirtualControlAPI.py." It looks as the package: "CODESYS Virtual Control for Linux SL" was not installed. But, there isn't one in CODESYS Store or I'm doing something incorrectly.
Last updated: 2024-03-03

Post by ewi04 on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
It's good that you've found a workaround. But it's bad that you need one. The array length auf my struct is 16. My struct also contains other arrays of structs. It contains a total of 1716 variables. I have tested saving and loading extensively under version 4.3.0.0. It looks good. I couldn’t find any problems. Maybe it helps to reinstall the update (see previous post). Otherwise you could try my test project (first post). This should work with version 4.3.0.0.
Last updated: 2024-03-04

Post by androidzz on Json Builder problem? ^{CODESYS Forge talk (Post)}
Dear reader, I am using the codesys JSON utilities SL, 1.9.0.0 library. And then specifically the FB JSONBuilder. I need to create a main object with at least 2 objects in it. The first object is no problem, but I cannot insert the second object into the main object. See attached my code and the result I get. I am assuming that I am doing something wrong with the parent index but have tried a lot and can't get it done. Kind regards, Rob
Last updated: 2024-03-11

Post by aniket-b on Multiple function blocks are not executing at the same time in ladder logic ^{CODESYS Forge talk (Post)}
I have two ethernet Ip drives and created Function Blocks for different motions tasks. I am using same FB for both the drives. When I try to execute the relative move start command on FB for both the drives it is not working. However, if I add 1ms second delay between the execution of each drive it is working. Also when I change the rung order it is working for the first drive in the rung. what could be the wrong here?
Last updated: 2024-03-12

Post by stuartjr on Disabling forcing of specific variables ^{CODESYS Forge talk (Post)}
Is there a way that I can create a variable in a GVL that I can control with logic but a user can not put a force on this variable. I have looked at the access rights but this seems to only limit editing the GVL or POU. This variable will only be assigned a value in one POU but it will be used throughout many other POUs.
Last updated: 2024-03-15

Post by stuartjr on Disabling forcing of specific variables ^{CODESYS Forge talk (Post)}
OK.. so maybe I miss understood for how the forcing order works. It seems that the force list is applied at the beginning of every task call (I'm assuming this based on what I am seeing). If I force my variable FALSE and then write it TRUE in a task, then it stays TRUE for that task, but then in the next task it will go back to FALSE.
Last updated: 2024-03-15

Post by wollvieh on Problem while updating to new runtime 4.11.0.0 ^{CODESYS Forge talk (Post)}
okay, no ideas. So i made a new fresh image for the raspberry, so far,so good. Licensing the new image was no problem. And, after having trouble while read write files on the raspberry pi, i found the solution for these file operations with the Variable ForceIecFilePath in the CODESYSControl.cfg file. Some people had that issue discussed in that thread : https://forge.codesys.com/forge/talk/Deutsch/thread/d2df08e587/
Last updated: 2024-03-18

Sort by relevance or date