Post by nano on Dynamic setting of the modbus tcp/ip slave ip address ^{CODESYS Forge talk (Post)}
habe a look to this faq, this should work for u https://faq.codesys.com/plugins/servlet/mobile?contentId=24510471#content/view/24510471
Last updated: 2024-02-17

Post by ragarcia on Error while using UpdateConfiguredIPSettings to change IP address ^{CODESYS Forge talk (Post)}
I did check I cannot see any error log. It is when executing the Reconfigure function that I get an error as return from that function.
Last updated: 2024-02-19

Post by ralfk on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hello together. I also want to try it but when enter Ethernet.UpdateConfiguredIPSettings I don't see this Option. what do I wrong. I hope somebody can help me.
Last updated: 2024-02-19

Post by ralfk on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hello together. I also want to try it but when enter Ethernet.UpdateConfiguredIPSettings I don't see this Option. what do I wrong. I hope somebody can help me.
Last updated: 2024-02-19

Post by vkira on Radio module on wago 750-8217 ^{CODESYS Forge talk (Post)}
Hello. Tell me how to connect to the internal radio module PLC 750-8217. I use the gsm sms_01 library. I don't understand how to connect. via com port? what's the address?
Last updated: 2024-05-06

Post by alex-wall on Network Variables not updating ^{CODESYS Forge talk (Post)}
This worked for me. I had four identical PLC's. Three of them worked just fine with 255.255.255.255 as the broadcasting address but the 4th would not update the variables. Changed it to 192.168.x.255 and everything worked.
Last updated: 2024-05-07

Post by pasillalej on No gateway with the given settings could be found ^{CODESYS Forge talk (Post)}
Go to Online>Communication Parameters...>Gateway>TCP/IP> Click on "New..." and reestablish your connections with whatever IP address and set up information you have. Bypass whatever is necessary as you may have to redownload to the PLC.
Last updated: 2024-05-09

Post by mondinmr on First IO address of a CAADiagDeviceDefault. ^{CODESYS Forge talk (Post)}
I have a device CAADiagDeviceDefault: IoConfig_Globals.Axis_A In our library, we perform introspection of the Etc_SlaveDiag. In that case, we have connectors, and by searching for them by address, I can find them in the IO mapping using the offset and size provided by EtherCAT. However, a Lenze i700 drive, instead of placing the IO mapping in the Etc_SlaveDiag device, places it in a sub-device CAADiagDeviceDefault. So, when I perform introspection, I cannot find the IO correspondences. Yet, in the CAADiagDeviceDefault, I do not find the connectors and cannot do the matching. Is there a way with a pointer or reference to a CAADiagDeviceDefault to obtain the address of the first input and the address of the first output? This is because we have our own motion library with many EtherCAT devices that automatically configure the mappings, but I can't manage to do so with the Lenze i700.
Last updated: 2024-08-22

Post by pablotorres on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hi! I have a problem, when I write Ethernet.Enable, I get an error ("Enable" undefined). Could you send me the program? I can't solve it, and I don't know if it's because I'm missing a library or some FB...
Last updated: 2024-09-30

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Most likely your IP address is set to 172.... because you use a VPN connection to your device. Probably best to use the other Ethernet interface for your modbus communication.
Last updated: 2024-10-24

Post by snhatton on Retain memory change to ZERO ^{CODESYS Forge talk (Post)}
I think more information is needed to help solve the issue. Can you list the exact steps to reproduce the issue? What version of Codesys are you using? Did you add a persistentVars object to your project? I would recommend browsing all instances of the retain variable to see all possible writes to the variable in question.
Last updated: 2023-09-18

Post by simotion on Variable indicating axis pending gearing or camming ^{CODESYS Forge talk (Post)}
Is there a variable indicating that a gearing or camming operation is pending? For instance MC_Gearin has beeen triggered, but starting point of master axis to start the sychronisation movement is not reached yet, so the slave axis is just waiting for this. I should be able to differ between a pending and active gearing or camming
Last updated: 2023-11-28

Post by talhaali on Adding a variable from text list into ST code ^{CODESYS Forge talk (Post)}
Hi, can I use a entry of a text list as variable in structured text? for example in attach picture, if i use want to use data of first row. I am trying to write: A : STRING := TextList.Default.0; but it is not workings
Last updated: 2023-12-07

Post by talhaali on Adding a variable from text list into ST code ^{CODESYS Forge talk (Post)}
Hi, can I use a entry of a text list as variable in structured text? for example in attach picture, if i want to use data of first row. I am trying to write: A : STRING := TextList.Default.0; but it is not workings
Last updated: 2023-12-07

Post by stuartjr on Disabling forcing of specific variables ^{CODESYS Forge talk (Post)}
So I think I've found a way to do what I want, but its a not as simple as I thought it would be. Essentially I've got to put my "logic" that decides what the GVL variable should be at the start of every task (rung 1). Then regardless of what the force is the variable will be set to what the logic decides.
Last updated: 2024-03-15

Post by stuartjr on Disabling forcing of specific variables ^{CODESYS Forge talk (Post)}
I also thought that if I had logic writing a value to this variable, then it would override the force anyway, since I thought that the force request was only applied at the beginning and end of the PLC scan. But this doesn't seem to be the case, the force persists throughout the logic regardless of what I write to the variable with logic
Last updated: 2024-03-15

Post by andreag0 on How to access to variable value through symbolic string name ^{CODESYS Forge talk (Post)}
Hello, anyone know how to get valiable value using a symbolic string name? For example: - send string to runtime using TCP/IP contains "GVL.TestINT" and get back the value. I need function that will translate the string to symbolic variable. Thank you. Andrea
Last updated: 2024-06-13

Post by mos89p on how to use UseDataExpanding() in datasource ^{CODESYS Forge talk (Post)}
Hi I need to update by software some structures in my datasource, i found this example: https://content.helpme-codesys.com/en/CODESYS%20Communication/_cds_update_data_interface.html it seems that because i use complex variable structure i need to use UseDataExpanding() instead of use data, the question is how to get an instance of IDatasourcesMgr3 i have the global variable g_Datasources is instantiated automatically
Last updated: 2024-06-18

Post by maxsus on Visu Frame-configuration___text will not work ^{CODESYS Forge talk (Post)}
Hello I have a problem with the Frame-configuration. In the picture below you can see that I set the Editor Type to variable. If it would be text it would work, but it wasnt variable anymore. Thanks for your time. Sorry, my codesys is in German.
Last updated: 2024-08-20

Post by maxsus on Visu Frame-configuration___text will not work ^{CODESYS Forge talk (Post)}
Hello I have a problem with the Frame-configuration. In the picture below you can see that I set the Editor Type to variable. If it would be text it would work, but it wasnt variable anymore. Thanks for your time. Sorry, my codesys is in German.
Last updated: 2024-08-20

Post by docker on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
Hi, i am interested in this thread and have tried a couple of the above examples in to determine remote webvisu access. I am having trouble getting the lastusage variable to refresh during runtime? It seems to only log the last usage at initialisation and that is it? how do i gain ongoing access to the time variable as the code is running? Thankyou.
Last updated: 2024-08-26

Post by arundara on Variable Sync Issue In Soft Plc Redundancy ^{CODESYS Forge talk (Post)}
Hello, I was trying to create a redundancy POC for our application where we read data from few modbus tcp devices. As there is a limitaion that modbus tcp device support only for single master device, we wanted to test how the variable sync happens in redundancy mode. For that i have used the redundancy sample code added a variable "b" under a condition. What i observed was while active controller is running, if passive controller is powerup, passive controller is able to sync all the data configured for redundacny. But after that the variable data which resided under a condition is not synching from active to passive controller. I have attached the image where i have highlighter the variable. Can some help me to understand how redundacny work in codesys soft plc and if there is a solution to sync variable which are under condition, please explain the same or suggestion to achieve the same. Hardware - Raspberry Pi (2 qty) Redundancy licence used - yes in both controllers. Codesys runtime - 4.9.0.0 Codesys software version - V3.5 SP19 if i have posted this question in wrong section, please do let me know in whcih section i have to post this question.
Last updated: 2023-12-01

Post by r-niedermayer on C0564 Warning Message ^{CODESYS Forge talk (Post)}
Please see or Online Help on how to initialize variable before using them: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_pragma_attribute_global_init_slot.html Regarding the Attribute global_init_slot: You can use this pragma to influence the order in which signatures are processed during global initialization. It can only be applied to signatures. By default, the initialization sequence for variables from global variable lists is undefined! However, if, for example, variables from one list depend on variables from another list, it is necessary to initialize one before the other. (Aee OLH and Syntax) The placeholder <slot> must be replaced by an integer value that defines the position in the initialization sequence.</slot> The default value is 50000. A lower value causes an earlier initialization! If several signatures have the same value for the 'global_init_slot' attribute, the order of their initialization remains undefined! Cautious application should therefore be considered! Example: The project contains f.e. two global variable lists GVL_1 and GVL_2. The global variable "A" is part of the global variable list GVL_1: {attribute 'global_init_slot' := '300'} VAR_GLOBAL A : INT:=1000; END_VAR The initialization values of the variables "B" and "C" of GVL_2 are dependent on the variable "A". {attribute 'global_init_slot' := '350'} VAR_GLOBAL B : INT:=A+1; C : INT:=A-1; END_VAR So if you set the 'global_init_slot' attribute of the global variable list GVL_1 to 300, i.e. to the lowest initialization value in the example, then it is ensured that the expression "A+1" is well-defined at the time of initialization of "B".
Last updated: 2024-01-30

Post by royw on Profinet library for C# ^{CODESYS Forge talk (Post)}
Hi, I don't know if I'm in the right place or if it's even possible... I'm looking for a way to address a Profinet device with Record Read and Write from my own PC. I actually only need very few commands to configure our device. This means setting the MAC address and a serial number. We would like to do this from a C# program. Now we are looking for a library or something similar. Since you can do it from Codesys, I thought there might be a DLL or something similar that you could use for this. As I said, we don't want real-time queries of the cyclic data but only record read/write. Does anyone have any helpful hint? Thanks in advance
Last updated: 2023-12-22

Post by joanm on Programmatically change the IP addresses of the Modbus TCP slave devices ^{CODESYS Forge talk (Post)}
Hello all, I am working in a project in which there are multiple Modbus TCP slaves. I need to be able to change the IP addresses of those devices from the HMI and I was planning to use the process depicted here: https://faq.codesys.com/display/CDSFAQ/Modbus+TCP+Slave%3A+Dynamic+Setting+of+the+IP+Address I can see the port number is what is used to specify which slave device we want to modify the IP address of. This said, can I freely set arbitrary port numbers to each device? I mean, can I set the first device to be at port 502, the second one at port 503... Any drawback or restriction? Is there any other way to reference to the device without having to change the port numbers? Thank you all in advance.
Last updated: 2024-01-04

Sort by relevance or date