Post by timvh on Modbus TCP Server connection is ESTABLISHED but all holding registers are value 0? ^{CODESYS Forge talk (Post)}
Are you sure you need to read holding registers? Have you tried reading input registers?
Last updated: 2026-01-07

Post by blitz on Can't get SMC_SmoothPath to work ^{CODESYS Forge talk (Post)}
So in my case the solution was that I had both smooth path and round path in the code. Both blocks had their own buffer and seemed completely separate but still triggering Execute on both caused the mentioned problems. When I blocked Execute the problems disappeared.
Last updated: 2026-01-11

Post by tjacks on Opc UA Data Source Client Browse Error in Codesys HMI ^{CODESYS Forge talk (Post)}
Codesys V3.5 SP21 Patch 3 Codesys HMI 3.5.21.30 I'm trying to connect to an OPC UA server on a Kuka robot controller using Codesys HMI's data source manager. I get through the login phase and the client browses most of the data structure on the server but errors out toward the end with a generic: Error while browsing the client, Failed with service result: BadUnexpectedError. If I complete the data source setup and try to update variables, I get the attached stack trace for the error. I've tried several different endpoint and security options. Most get me through the login but all error out while browsing. UA Expert happily connects and browses with the same configuration. I've connected this same version of Codesys to TwinCAT OPC UA servers and Siemens PLC OPC UA servers. Any ideas on what may be causing the generic BadUnexpectedError during OPC UA server browse?
Last updated: 2025-11-17

Post by grepoo on DataSource CodesysApp V3 ^{CODESYS Forge talk (Post)}
Hi, trying to create a datasource in appV3 but it returns error code 259 (not nearer specified) everytime, no matter the device i am using. Any idea of what it might signify ?
Last updated: 2025-11-19

Post by sb879 on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
Is it possible to do non-formal invocation of function blocks in CODESYS? I get an error when I try, see the attached pic. Also attached a pic from IEC 61131-3 describing non-formal invocations.
Last updated: 2025-12-04

Post by sb879 on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
Is it possible to do non-formal invocation of function blocks in CODESYS? I get an error when I try, see the attached pic. Also attached a pic from IEC 61131-3 describing non-formal invocations.
Last updated: 2025-12-04

Post by somlioy on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
No that is not possible for function blocks, although it is possible to that with methods and functions as you see in your second pic.
Last updated: 2025-12-05

Post by bruno-roth on Parker Compax3 controlled by Schneider LMC 201 ^{CODESYS Forge talk (Post)}
Hello, you could use any CODESYS PLC which has an EtherCAT master and the possibility to run the CODESYS Softmotion.
Last updated: 2026-01-13

Post by osande on Trend/trace data ^{CODESYS Forge talk (Post)}
Anyone have problems with trend in lastest release - SP21 Patch5? Does not record data, stores only zeros to the sqlite database and flatliners at zero in trend/trace views. Worked in P4.
Last updated: 2026-03-12

Post by ph0010421 on Network variable stops sending ^{CODESYS Forge talk (Post)}
I'm having right now trouble if the NVL is 'big' and I've needed to reduce the size. It sends for (about) 1 hour then stops.
Last updated: 2026-04-30

Post by osande on V3.5 SP22 Patch1 ^{CODESYS Forge talk (Post)}
... and SP21 P6 also. Kind of bummer, migrating from TIA Portal to Codesys for PLC educational courses. These kind of bugs, and other deficiencies, really makes me regret my choice.
Last updated: 2026-05-06

Post by saml on Eaton HFX Controllers ^{CODESYS Forge talk (Post)}
Hellow every one. DPguy could do you share how you resolved the issues? what Codesys version did you used to fix it? thank a lot!!!
Last updated: 2026-05-26

Post by saml on Eaton HFX Controllers ^{CODESYS Forge talk (Post)}
Hellow every one. DPguy could do you share how you resolved the issues? what Codesys version did you used to fix it? thank a lot!!!
Last updated: 2026-05-26

Post by cm1435 on too much data for the controller ^{CODESYS Forge talk (Post)}
When I download project to ifm CR2530 controller, met the error "too much data for the controller". Actually my project is just 70k Bytes, far from the memory 1M of CR2530. Anybony ever met this problem?
Last updated: 2026-05-30

Post by dim54 on Disabling automatic logout from the owner user ^{CODESYS Forge talk (Post)}
Hello! Please tell me how I can disable the automatic logout as the Owner user (CODESYS 3.5 SP15 Path 2). I have to reconnect multiple times during the workday. Thanks!
Last updated: 2026-01-16

Post by arpat on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
For me going to Project -> Project Settings -> Visualisation -> check "Visible" and then check both "Activate property handling ..." and "Activate implicit checks ..." solved the problem.
Last updated: 2026-02-03

Post by mrkm-dic on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Hello, I would like to ask whether it is technically supported (and practically achievable) to combine CODESYS Master Redundancy with EtherCAT ring (loop) redundancy in the same system. System setup CODESYS version: CODESYS 3.5.21.40 CODESYS Control SL for Weidmuller u-OS-4.12.2.0 Controllers (Masters): Weidmuller UC20-M4000 ×2, configured as Active / Standby using CODESYS redundancy EtherCAT Slaves: Weidmuller UR20-FBC-EC ×3, supporting EtherCAT ring / line break detection Topology: EtherCAT ring (loop) Main question Is it officially supported to use: ・CODESYS PLC/Master redundancy (Active/Standby) and ・EtherCAT ring topology (for cable redundancy) at the same time? Expected behavior Our expectation is: ・When the Active PLC fails, the Standby PLC becomes Active ・The Standby PLC then takes over the role of EtherCAT Master ・EtherCAT communication is re-established ・I/O control continues after reinitialization (a short interruption is acceptable; no strict bumpless requirement) We do not expect completely seamless / zero-cycle switchover, but we want to understand: ・Whether this combination is supported by design ・Or whether there are known limitations or restrictions when EtherCAT ring mode is used together with Master redundancy Clarification At this stage, the question is mainly about feasibility and support, not about a specific error message yet. Any official guidance, limitations, or real-world experience would be greatly appreciated. Thank you in advance.
Last updated: 2026-02-05

Post by jslarbaletier on Unable to compare projects containing alarm manager 4.5.0.0 ^{CODESYS Forge talk (Post)}
Hi! I had the same issue and finally found a solution. Alarm Configuration was located in a “Visualisations” folder. I moved Alarm Configuration directly under “Application”, and the issue was resolved.
Last updated: 2026-02-05

Post by risele on AI + Programming ^{CODESYS Forge talk (Post)}
It's already fine to use, with help of exporting/importing as PLC_Open, at least CODEX is good in editing directly at XML and/or providing changes description separately.
Last updated: 2026-02-13

Post by risele on CODESYS and Github Copilot ^{CODESYS Forge talk (Post)}
You actually can use copilot by PLCOpen XML file exporting/importing. It's fine to work with it directly (at least, the Codex do it quite well).
Last updated: 2026-02-13

Post by fajean on Issue with library updates ^{CODESYS Forge talk (Post)}
We make heavy use of internally developed libraries, which are often nested on multiple levels. I routinely work simultaneously on several libraries along with a project that use them. I make changes to a library and immediately perform a download (online or otherwise) in the project. For the longest time, we had zero issue with this. But starting a good while back, with 3.5 SP19 I think, CODESYS started not noticing library updates in other instances most of the time. When the update is missed, the project sees no need to update the code, and any download ignores the new code. A "Clean all" does not solve the issue. But if I close and then re-open the project, then the new version is noticed and the download works. The other solution is saving the library to the registry multiple times (say, 20-30 times, less if lucky), and then at some point the project notices the changed library. I am now on SP21, and it is still not fixed. This is driving me mad, any tasks probably takes me double the time or more due to this problem. My colleague has the same problem on a separate computer. Is this a known issue? Is there a setting somewhere that changes how updates are checked? Thanks for any help!
Last updated: 2026-02-13

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Downloaded and installed edge gateway 4.19.0.0. Unfortunately same behavior: "Control for Linux SL" NOT shown in drop lists on either "Deployment" Tab of tool "Deploy Control SL", or as "installed packages" on "Operation" tab (only "CODESYS Edge Gateway for linux" is shown).
Last updated: 2026-02-16

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Am I alone in this? Is this a known fault? Should I look for the reason of the lacking update option for "Control for linux SL" in my system or is it a potential fault in the codesys system?
Last updated: 2026-02-17

Post by eschwellinger on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Hi could you check if this really exists in 4.19.0.0 deploy tool? In your case architecture is missing- see my configuration
Last updated: 2026-02-17

Post by eschwellinger on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
can you please check this: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_toubleshooting_deploytool2.html#UUID-b83dc01e-8cff-c574-7efe-8615b95a51ed_section-idm234790234401598
Last updated: 2026-02-19

Sort by relevance or date