Post by eschwellinger on Beckhoff CX9240 : Using Internal EtherCAT Bus ^{CODESYS Forge talk (Post)}
yes, you need to install Control RTE CX. In that package there is the Internal EthercatMaster / EthercatMasterSoftmotion which you could add then.
Last updated: 2026-07-10

Post by arj3090 on Beckhoff CX9240 : Using Internal EtherCAT Bus ^{CODESYS Forge talk (Post)}
I installed Linux ARM SL and it recognizes the RJ45 ethernet ports, but I cannot get it to recognize the internal port for the IO cards.
Last updated: 2026-07-10

Post by eschwellinger on CODESYS Control for Raspberry Pi 5 - "Hardware version or firmware version not supported" on Rev 1.1, persists across multiple runtime versions and OS images ^{CODESYS Forge talk (Post)}
see here: https://www.codesys.com/eco-system/up-to-date/release-lifecycle/release-plan-roadmap/ 18.8
Last updated: 2026-08-11

Post by eschwellinger on codesys installer deletes itself instead of updating ^{CODESYS Forge talk (Post)}
I would try to use: https://store.codesys.com/de/codesys-installer.html this standalone version. Seems if your version out of SP19 setup have some update problem.
Last updated: 2026-08-11

Post by dim54 on Disabling automatic logout from the owner user ^{CODESYS Forge talk (Post)}
Hello! Please tell me how I can disable the automatic logout as the Owner user (CODESYS 3.5 SP15 Path 2). I have to reconnect multiple times during the workday. Thanks!
Last updated: 2026-01-16

Post by arpat on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
For me going to Project -> Project Settings -> Visualisation -> check "Visible" and then check both "Activate property handling ..." and "Activate implicit checks ..." solved the problem.
Last updated: 2026-02-03

Post by mrkm-dic on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Hello, I would like to ask whether it is technically supported (and practically achievable) to combine CODESYS Master Redundancy with EtherCAT ring (loop) redundancy in the same system. System setup CODESYS version: CODESYS 3.5.21.40 CODESYS Control SL for Weidmuller u-OS-4.12.2.0 Controllers (Masters): Weidmuller UC20-M4000 ×2, configured as Active / Standby using CODESYS redundancy EtherCAT Slaves: Weidmuller UR20-FBC-EC ×3, supporting EtherCAT ring / line break detection Topology: EtherCAT ring (loop) Main question Is it officially supported to use: ・CODESYS PLC/Master redundancy (Active/Standby) and ・EtherCAT ring topology (for cable redundancy) at the same time? Expected behavior Our expectation is: ・When the Active PLC fails, the Standby PLC becomes Active ・The Standby PLC then takes over the role of EtherCAT Master ・EtherCAT communication is re-established ・I/O control continues after reinitialization (a short interruption is acceptable; no strict bumpless requirement) We do not expect completely seamless / zero-cycle switchover, but we want to understand: ・Whether this combination is supported by design ・Or whether there are known limitations or restrictions when EtherCAT ring mode is used together with Master redundancy Clarification At this stage, the question is mainly about feasibility and support, not about a specific error message yet. Any official guidance, limitations, or real-world experience would be greatly appreciated. Thank you in advance.
Last updated: 2026-02-05

Post by jslarbaletier on Unable to compare projects containing alarm manager 4.5.0.0 ^{CODESYS Forge talk (Post)}
Hi! I had the same issue and finally found a solution. Alarm Configuration was located in a “Visualisations” folder. I moved Alarm Configuration directly under “Application”, and the issue was resolved.
Last updated: 2026-02-05

Post by risele on AI + Programming ^{CODESYS Forge talk (Post)}
It's already fine to use, with help of exporting/importing as PLC_Open, at least CODEX is good in editing directly at XML and/or providing changes description separately.
Last updated: 2026-02-13

Post by risele on CODESYS and Github Copilot ^{CODESYS Forge talk (Post)}
You actually can use copilot by PLCOpen XML file exporting/importing. It's fine to work with it directly (at least, the Codex do it quite well).
Last updated: 2026-02-13

Post by fajean on Issue with library updates ^{CODESYS Forge talk (Post)}
We make heavy use of internally developed libraries, which are often nested on multiple levels. I routinely work simultaneously on several libraries along with a project that use them. I make changes to a library and immediately perform a download (online or otherwise) in the project. For the longest time, we had zero issue with this. But starting a good while back, with 3.5 SP19 I think, CODESYS started not noticing library updates in other instances most of the time. When the update is missed, the project sees no need to update the code, and any download ignores the new code. A "Clean all" does not solve the issue. But if I close and then re-open the project, then the new version is noticed and the download works. The other solution is saving the library to the registry multiple times (say, 20-30 times, less if lucky), and then at some point the project notices the changed library. I am now on SP21, and it is still not fixed. This is driving me mad, any tasks probably takes me double the time or more due to this problem. My colleague has the same problem on a separate computer. Is this a known issue? Is there a setting somewhere that changes how updates are checked? Thanks for any help!
Last updated: 2026-02-13

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Downloaded and installed edge gateway 4.19.0.0. Unfortunately same behavior: "Control for Linux SL" NOT shown in drop lists on either "Deployment" Tab of tool "Deploy Control SL", or as "installed packages" on "Operation" tab (only "CODESYS Edge Gateway for linux" is shown).
Last updated: 2026-02-16

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Am I alone in this? Is this a known fault? Should I look for the reason of the lacking update option for "Control for linux SL" in my system or is it a potential fault in the codesys system?
Last updated: 2026-02-17

Post by eschwellinger on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Hi could you check if this really exists in 4.19.0.0 deploy tool? In your case architecture is missing- see my configuration
Last updated: 2026-02-17

Post by eschwellinger on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
can you please check this: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_toubleshooting_deploytool2.html#UUID-b83dc01e-8cff-c574-7efe-8615b95a51ed_section-idm234790234401598
Last updated: 2026-02-19

Post by timvh on Unit testing support / libraries for EcoStruxure Machine Expert (CODESYS) ^{CODESYS Forge talk (Post)}
If the Professsional Developer Edition (which includes the Test Manager) is not supported by Schneider, then an option is to use the Open Source Unit test framework. See: https://forge.codesys.com/lib/counit/home/Home/
Last updated: 2026-02-20

Post by fpawlak on How to register own component - CMAddComponent() or CMAddComponent2() ^{CODESYS Forge talk (Post)}
Hi All, I wonder which way is correct or better? I would like to register my own component in order to use it in CMPLog. I can use CMAddComponent() or CMAddComponent2() to do it. The main difference is whether I provide udiCmpId myself or it will be generated by runtime. But I don't know which way is correct. Please look at those two examples below. I don't know if CMAddComponent2() is newer and then should be used? CMAddComponent() + providing my own udiCmpId //16#FFFF0000 for unknown myVendorId := 16#FFFF0000; myLibId := 1; myComponentId := myVendorId OR CMPID_IecCode OR myLibId; componentHandle := CMAddComponent(pszComponent:= 'myComponent', udiCmpId:= myComponentId, udiVersion:= 1, pResult:= ADR(result)); IF componentHandle <> RTS_INVALID_HANDLE AND result = CmpErrors.Errors.ERR_OK THEN LogAdd2( hLogger:= STD_LOGGER, udiCmpID:= myComponentId, udiClassID:= CmpLog.LogClass.LOG_ERROR, udiErrorID:= 0, udiInfoID:= 0, pszInfo:= 'myComponent regidtered succsefull.' ); ELSE LogAdd2( hLogger:= STD_LOGGER, udiCmpID:= CMPID_CmpMgr, udiClassID:= CmpLog.LogClass.LOG_ERROR, udiErrorID:= 0, udiInfoID:= 0, pszInfo:= 'Error while regidtering myComponent.'); END_IF CMAddComponent2() + udiCmpId generated by runtime componentHandle := CMAddComponent2(pszComponent:= 'myComponent2', udiVersion:= 1, udiCmpId:= ADR(myComponentId), pResult:= ADR(result)); IF componentHandle <> RTS_INVALID_HANDLE AND result = CmpErrors.Errors.ERR_OK THEN LogAdd2( hLogger:= STD_LOGGER, udiCmpID:= myComponentId, udiClassID:= CmpLog.LogClass.LOG_ERROR, udiErrorID:= 0, udiInfoID:= 0, pszInfo:= 'myComponent2 regidtered succsefull.' ); ELSE LogAdd2( hLogger:= STD_LOGGER, udiCmpID:= CMPID_CmpMgr, udiClassID:= CmpLog.LogClass.LOG_ERROR, udiErrorID:= 0, udiInfoID:= 0, pszInfo:= 'Error while regidtering myComponent2.'); END_IF
Last updated: 2026-02-27

Post by fpawlak on How to register own component - CMAddComponent() or CMAddComponent2() ^{CODESYS Forge talk (Post)}
Hi, so really oneone has no idea which way is correct one? Or maybe both are okey if they work for me?
Last updated: 2026-03-13

Post by pernockham on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
Finally sorted (unit in China). The problem was related to dns-setting of the gateway/host. Connection (also inside china) tested/works.
Last updated: 2026-03-18

Post by reinier-geers on CODESYS crashes when adding standard OPC UA Information Model to Communication Manager ^{CODESYS Forge talk (Post)}
I only experiance a lot of problems with Version 20 and 21. Version 20 crashes at a online change Version 21 - 5 identical programms in one project. The frist runs. The thirt Crashes. NOt even a screen
Last updated: 2026-03-19

Post by malie on Issue with library updates ^{CODESYS Forge talk (Post)}
Hello, i got the same problem, but on my site it started with version 3.5.21, with version 3.5.19.7 it worked like a charm. How get the old behavior back? Or how to reload the librarys in an open project/library manually?
Last updated: 2026-04-24

Post by reinier-geers on Network variable stops sending ^{CODESYS Forge talk (Post)}
What version. 20.5 ? ive got also problems wiyth that version. Online change, it hangs itself after one hour. Then one project can problems. Ive change display with 21.0 . At home i turned on the 20.5 display. After 1 hour i goes to stop.
Last updated: 2026-05-06

Post by totorovic on Ladder editor bug with 3.5.21.20 ^{CODESYS Forge talk (Post)}
The update via CODESYS Installer fails (admin mode). Anyway I am switching all my POUs from Ladder to ST because Ladder cannot be used like this.
Last updated: 2026-06-02

Post by eschwellinger on Linux ARM64 Deploy Fail - Index out of range ^{CODESYS Forge talk (Post)}
I would check the version of the deloy tool using the CODESYS installer. Sure manually installing works too, but woukd nice to know if there is a problem. Currebt version is 4.21.0.0 of the deploytool.
Last updated: 2026-07-01

Post by hhermsen on Codesys v3.5.22.10 - Internal error:System.AggregateException...Value cannot be null...Parameter name: expLValue ^{CODESYS Forge talk (Post)}
I pinpointed down 4 possible causes for this compiler error: Bare/empty statements (;) standing alone inside an IF/CASE branch — just removed two instances. The optimizer that tries to inline/replace expression statements may choke when a statement has no actual assignment to extract. A VAR_IN_OUT parameter used directly as a FOR loop's own control variable (FOR X := X TO Y DO) General deep-nesting complexity — every one of my decode routines has the same shape (IF busy THEN ... FOR loop containing nested CASE/IF chains ... END_IF), and the crash trace consistently shows for loop → sequence → ifst → sequence → ifst → sequence regardless of the code change. This raises the possibility that it's not one specific statement but a structural depth/complexity limit in SP22.x's compiler optimizer — which would mean no small code change fixes the issue. Only restructuring to reduce nesting depth, or downgrading the compiler will. Something entirely outside my library files — which cannot not ruled out since the exact stack trace was triggered by a Visualization object, in a totally different codebase. This means the same crash signature can come from unrelated causes. IMHO cause 3 seems the most probable one..
Last updated: 2026-07-11

Sort by relevance or date