Post by rmaas on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
Hi, The '' characters in Codesys are there only to indicate it is a STRING type. They are not actually added to the string, maybe you are adding them unintentionally in the concat function? You can send your data from Codesys to Hercules to verify... Another option is to send the data as an array of bytes instead of a string, with every byte representing 1 ASCII character. https://www.ascii-code.com/ This way you are 100% sure Codesys is not adding any unwanted characters.
Last updated: 2025-01-31

Post by imdatatas on Remote to PLC device in City-B from City-A ^{CODESYS Forge talk (Post)}
Hello, In an example scenario like below figure, can the developer in City-A connect to the device in City-B remotely using only "Codesys Automation Server" and "Edge Gateway" with the following structure? If no, what should be done with Automation Server for this remote connection requirement? If yes, how should it be configured for this remote connection requirement? Thank you in advance for your answers. Regards, Imdat
Last updated: 2025-02-04

Post by sulzbrunn on Alte Application aktiv nach Neustart ^{CODESYS Forge talk (Post)}
Hallo Zusammen, ich hab hier folgendes Phänomen seit längerer Zeit: Auf meinem Raspberry Pi wird nach einem Neustart des Gerätes immer eine 2 Jahre alte Application gestartet und die kurz zuvor Vollständig reingeladene Version wird verworfen. Selbst das zwischenzeitliche Enfernen des CODESYS Runtime package brachte die alte Version nicht weg. Zielsystemversion: 4.2.0.0 CodeSys3.5 SP17 Patch 2 Raspberry Pi 4 Model B Rev 1.4 Freu mich über Tipps. Michael
Last updated: 2025-02-07

Post by pedrorgd on SFC Exit Action during SFCReset Flag ^{CODESYS Forge talk (Post)}
I have an SFC POU with an SFCReset Flag that I use to restart it from the beginning. It works properly. During an Action Step I set one variable to TRUE and I reset it to FALSE during the Exit Action. My question is if this Exit Action will be activated -and the variable reset to FALSE- if I get out of the active step using the SFCReset Flag.
Last updated: 2025-02-11

Post by dogulas on Removing a symbol from the IEC Symbols Editor grid ^{CODESYS Forge talk (Post)}
Right now when I make a change to one of the tags in my code, I have to completely remove the IEC Symbol Publishing object from the tree view and re-add it. Then I have to completely re-add every symbol to the grid view by dragging them over. This can be a lot. Surely, this is not the intended behavior. Can anyone tell me how this is supposed to work?
Last updated: 2025-02-11

Post by tim2508 on Werte von NodeRed an Codesys für Raspberry ^{CODESYS Forge talk (Post)}
Guten Abend liebe Community, Im Rahmen meiner Technikerarbeit muss ich ein Gewächshaus mit einem RaspberryPi und Codesys erstellen. Mein Problem liegt hierbei bei den Sensoren. Ich bekomme über NodeRed alle Sensor Signale ausgelesen jedoch bekomme ich sie nicht im Codesys übertragen. Hat hier jemand evtl. eine Idee ? wenn ja am besten mit Codebeispiel. Habe generell an Modbus oder MQTT gedacht. Vielen Dank im Vorraus Tim
Last updated: 2025-02-19

Post by rmaas on TCP Server ^{CODESYS Forge talk (Post)}
Hi George, I do not know what the problem is with the syssocket implementation, but when i read the forums it seems the Net Base Services library is the recommended way to go. There is another more extensive example here: https://forge.codesys.com/prj/codesys-example/plc-chat-nbs/home/Home/ I have just tested this example and it works very well, also with closing and opening the connection from hercules... good luck!
Last updated: 2025-02-20

Post by timo on Visualisierung: Tastatur vergrößern? ^{CODESYS Forge talk (Post)}
Hallo, Ich nutze den Stil White Style 3.5.16 mit ein paar farblichen Änderungen über den Stileditor. Was ich gerne machen würde, wäre die Tastaturen zu vergrößern, die sich auf dem Touchpanel öffnen wenn ein INT oder STRING eingegeben werden muss. Gibt es dafür "fertige" Variablen im Editor des Stils oder in Codesys selbst, mit dem die Größe hochskaliert werden kann? Oder muss ich jede Taste einzeln anpacken? Danke im Voraus :)
Last updated: 2025-02-21

Post by dkugler on Visualisierung: Tastatur vergrößern? ^{CODESYS Forge talk (Post)}
mir ist kein Scallierungsparameter bekannt bisher. Als Workaround fällt mir folgendes ein: für keypad und numpad jeweils eine zusätzliche Visualisierungen erstellen, welche lediglich einen Frame enthält, der wiederum das originale numpad und keypad aufruft. Über die Eigenschaft relative Bewegung X & Y könnte dann der Frame sogar zur Laufzeit über eine Variable in der Größe angepasst werden. Die beiden ersellten Visualisierungen muss man dann noch im Visumanager unter Dialogeinstellugen als zu verwendende Numpad und Keypad entsprechend zuweisen. Nachteil: Visu-Scallierungen sind oft Spritfresser, sprich gönnen sich ordentlich Rechenleistung. Viel Erfolg!
Last updated: 2025-02-24

Post by alex2 on How to uninstall SVN module ^{CODESYS Forge talk (Post)}
Hello, At work, I use Codesys V3.5 SP10. I wanted to run some tests with the SVN module, which I kept installed (without actually using it in the end). However, when I tried to launch Codesys today, I was informed that a license was missing. I suspect that this is due to the SVN module. Could you tell me how to uninstall it without launching Codesys? (as i cant proprerly start Codesys without the license) Thank you in advance.
Last updated: 2025-02-25

Post by reiterf on Visualisierungs-Stil White style, 3.5.16.0 verursacht Überseztungsfehler ^{CODESYS Forge talk (Post)}
Hi, ich möchte ein kleine Testaufbau visualisieren und hätte mich für den Stil "White" entschieden. Nun ist es allerdings so, daß dieser Stiel einige Fehler beim übersetzen erzeugt. Ich habe dann versicht auf den Basic-Style zurückzugehen -- dann sind auch die Fehler weg. Leider wird dann auf der WebVisu (nur am Gerät) kein Druckknopf mehr angezeigt. Ich habe die gleichen Fehler auf 2 Codesys-Installationen (Gleicher Software Stand, 2 PCs) Kann mir da jemand weiterhelfen?
Last updated: 2025-02-27

Post by struccc on When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess) ^{CODESYS Forge talk (Post)}
Are you sure when running as service, it is not reading configuration from C:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS... ? Is the SRV user is set for the CODESYS services? 2 ways to fix it: Change the CODESYSControl.cfg in the installation directory (ProgramFiles/CODESYS...). Replace %APPDATA% with something fix. Modify the service configuration in windows service manager to run as a different user (ie bot as Local system account)
Last updated: 2025-02-28

Post by stribor on Passing properties as VAR_IN_OUT variables. ^{CODESYS Forge talk (Post)}
I am designing a custom slider object and i ran into a problem when i want to use properties with it. I can update the basic variables if i have a slider variable defined as VAR_IN_OUT, but it does not work with properties. How can i achieve same functionality that some basic objects have (for example basic Slider that comes withing the codesys libraries) such that i can pass both variables and properties to it and they can be modified within the object? I am using Codesys V3.5 SP20 Patch 5.
Last updated: 2025-03-01

Post by eoahe on Problem Reading Registers via Modbus from non Codesys device ^{CODESYS Forge talk (Post)}
Hey Guys :) I have the following Problem using Modbus via Codesys: I'm trying to implement a Modbus Device into my codesys project. The device is a Router from Teltonika (RUT956) and it can communicate via Modbus. Currently I'm trying to implement it into my codesys prject as a slave and I'm using my windows computer as master. As it is not a codesys device (the codesys application is not uploaded to device as it has its own software) I'm having problems requesting and reading registers from the router. I've set up my windows computer as Master and implemented the router as slave. When I go online on my master device it sais that it has established a connection to the slave (router)(So I'm thinking this could work as there is a connection?). The goal is to read the GPS (latitude and longitude) data and on the homepage of teltonika you can find the register address and number of registers (adress 143 for latitude and 145 for longitude; both have a number of two registers). I've found tutorials how to read specific registers via their register address with other modbus programs (like modbus-cli), but as my entire project is established in codesys I was hoping to read these specific registers via codesys so that I can show the GPS data on my dashboard. I've tried establishing slave channels but that hasn't been working. I tried read input register channels of the length 4 but it's not possible to define specific register addresses to read via codesys so that didn't work (I jsut get a slaves device failure) and I've also tried establishing 516 (total number of registers the router sends I think?) read inputregister channels but that has the samle failure... So i guess the problem I'm having is establishing slave channels to read these specific registers. Does anyone know how to tackle this problem and has maybe had the same problem? Or maybe someone knows a workaround? I'm quite new to codesys so maybe I'm also lacking expertise...
Last updated: 2025-03-01

Post by trusty-squire on Which database to use? ^{CODESYS Forge talk (Post)}
How large and how complex? It's tough to make a recommendation without additional details. The simplest thing is to just use data arrays (or even arrays of arrays). Not knowing your requirements, it might be sufficient and the simplest option is often the best. https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_datatype_array.html You might also look into using Recipes? https://forge.codesys.com/prj/codesys-example/recipe-manageme/home/Home/ Some more complex options below. https://forge.codesys.com/prj/codesys-example/element-collect/home/Home/ https://store.codesys.com/en/mysql-library-sl.html
Last updated: 2025-03-04

Post by kuapiz on Camera RTSP Feed ^{CODESYS Forge talk (Post)}
Hello, I'm facing the same problem, I can access the FLIR AX Series camera through the IP converter software (go2rtc). In the CODESYS 3.5.19 patch 7 software, the streaming does not appear in the webvisu even using the URL "http://xxx.xxx.x.xxx:1984/stream.html?src=flirr". I used the "RTC" and "MJPG" modes. HW: PFC200 750-8217/600-000. FW: v27. If anyone has a solution, could you help us?
Last updated: 2025-03-05

Post by darko7417 on When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess) ^{CODESYS Forge talk (Post)}
Wow! Thanks mr Strucc. Changed to service to run as local acc, and now log works! The service (run from local acc) is using this config: C:\Users\SRV\AppData\Roaming\CODESYS\CODESYSControlWinV3\C4DBB537\CODESYSControl.cfg The path you first mentioned (c:\Windows\System32\config\systemprofile\AppData\Roaming) has no CODESYS folder in it (Windows 11 24H2 b26100.3194). Thanks for your help :)
Last updated: 2025-03-06

Post by pernockham on Inheritence of struct, ^{CODESYS Forge talk (Post)}
Interesting, thanks! Didnt know about ANY before, and will sure find a use-case for it. Im not sure it will help me here though, it seems to me that an ANY will not accept a string assignment? I actually think that the "ALIAS" should work, that was a hard found error. I had a fair bit of scratching my head looking for misdirected pointers before I understood what was (not) happening. I will use the work-around of individual structs instead.
Last updated: 2025-03-08

Post by hismoon on Inheritence of struct, ^{CODESYS Forge talk (Post)}
Using a UNION instead of a STRUCT alone should give you that flexibility and only occupy memory once. And if you want to be really elegant, you could use an FB, which only holds PUBLIC VAR. Because a POU can use "EXTENDS"/inheritance. In CODESYS V3, an FB has a lot in common with C++ classes. Using ANY or ALIAS is rarely a good idea. It neither won't be pretty, nor have good readability and requires you to create a lot of error-prone things around it.
Last updated: 2025-03-14

Post by pistola on How to change font and font color rectangle/or related object ^{CODESYS Forge talk (Post)}
Here is the help sections for visual elements rectangle. https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_rectangle.html Under "Font Variable" there is "Color" which is a Dword, you can make a variable that changes colour within your code to the color needed. Note the format for the Dword variable is: colorVariable := 16#TTRRGGBB Where: TT = Transparency 00-FF RE = Red 00-FF GG = Green 00-FF BB = Blue 00-FF https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_animate_color.html
Last updated: 2025-03-17

Post by imdatatas on Problem of assigning physical addresses to variables of type ARRAY OF ARRAY as MW and QW ^{CODESYS Forge talk (Post)}
Hello, I am encountering an interesting problem as below in SP20patch5 variable definition area. I think this is a bug. As can be seen in the attached screenshot, it assigns the same %MW or %QW address to all elements of the array. I hope Codesys team can solve this problem in the next version. Best regards, Imdat
Last updated: 2025-03-17

Post by krisj on ScriptEngine POU property Get and Set accessor. ^{CODESYS Forge talk (Post)}
Hey! I am trying to generate a function block with properties from a list with script engine. Codesys/ScriptEngine creates both the Get and the Set accessor. I cannot find a way to delete the Set method/accessor. Anyone encountered the same problem or have a solution for this? for prop_name, prop_type in list: property = pou.create_property(prop_name, prop_type) get = pou.find("Get", recursive=True)[i] get.textual_declaration.replace("") get.textual_implementation.replace(prop_name + " := " + struct_name + "." + prop_name + ";") set = pou.find("Set", recursive=True)[i] set.textual_declaration.replace("") set.textual_implementation.replace("") i += 1
Last updated: 2025-03-17

Post by twofacexx on codesyscontrol.log exzessive Größe ^{CODESYS Forge talk (Post)}
Moin, kann es sein, dass dies auch schon wieder veraltet ist? Ich habe aktuell die 3.5 SP20 Patch 4 mit einem Paspberry 5 64bit SL am laufen und es wird leider nix geloggt. Muss man da etwas am Filter einstellen damit etwas geloggt wird? WÄre echt cool, wenn Codesys anfangen würde, Info´s in Form von Text einzupflegen....dann könnte man es auch nutzen. Brauche das Log bzgl. eines anderen Problems mit der "SysProcess.SysProcessExecuteCommand2", leider auch nicht gut kommentiert.
Last updated: 2025-03-18

Post by atone on Change IO-Link Device Interface connected to a Profinet-Slave at Runtime ^{CODESYS Forge talk (Post)}
I need to be able to update (change) the interface of an IO-Link device at runtime. The reason is the connected sensor can be selected at runtime, and some sensors we use have a 2 byte IN interface, others have a 4 byte IN interface, others 16 byte IN, others 16 byte IN/OUT (see attached screenshot). Is it possible at all? When yes, which function should I use? Thank you!
Last updated: 2025-03-18

Post by patrik on windows runtime crashes. ^{CODESYS Forge talk (Post)}
Faulting application name: CODESYSControlService.exe, version: 3.5.20.30, time stamp: 0x66ebc91d Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x0000028010670e31 Faulting process id: 0x0x1F50 Faulting application start time: 0x0x1DB1BA284347B9C Faulting application path: C:\Program Files\CODESYS 3.5.20.30\GatewayPLC\CODESYSControlService.exe Faulting module path: unknown Report Id: d3ac6a03-667a-4d61-ab36-d2ae703fc252 Faulting package full name: Faulting package-relative application ID: My runtime crashes from time to time. I'm not getting anything in the PLC logs. This is from the windows logs. Can anyone help me understand why this is happening?
Last updated: 2025-03-19

Sort by relevance or date