Post by mondinmr on What happened to Python? ^{CODESYS Forge talk (Post)}
My mistake! Now is an external package. I found in installer. Sorry
Last updated: 2025-10-01

subdevicesCollapsed attribute in deviceDescriptor ^{CODESYS Forge talk (Thread)}
subdevicesCollapsed attribute in deviceDescriptor
Last updated: 2025-10-01

Post by esther on subdevicesCollapsed attribute in deviceDescriptor ^{CODESYS Forge talk (Post)}
I was trying to use subdevicesCollapsed attribute in device descriptor in order to not expand the subdevices when a new device with subdevices is inserted in the device tree. I use this as follows:<fixed subdevicescollapsed="true">. But it seems it doesn`t work. I am ussing Codesys v3.5 SP16 Patch4. Is anything wrong with this? Or am I mistaken with the use of this attirbute?</fixed>
Last updated: 2025-10-01

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Sorry for the question, but I'm not completely getting the idea here, could you be more specific, maybe give an example? I'm now in a state where I don't have a softcontainer on my license server anymore (even after reinstalling from the Codesys-IDE). I tried reaching the webserver of Codemeter but when I do that I get redirected to http://"IP":22352 This is not reachable, afterwards I installed lynx on my Debian machine (command line only). From here I could reach the webserver and toggle the network server setting, but unfortunately this did not help. I also tried to changed the remote read setting to 1 (in the Server.ini file). But after a Codemeter reboot this is overwritten to 0. I have the feeling that it should be much easier to get a license to work, am I missing some checkbox somewhere? Is there a tutorial (or manual) that explains the licensing sequence step by step, because I'm pretty stuck.
Last updated: 2025-10-01

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
the procedure is usually 1. install the Licenserver (on the host) with the deploy tool in CODESYS) 2. if you go to the CODESYS WBM you should see an empty Softcontainer 130-xxxxxx 3. activate the license with SoftContainer number and ticketnumber that was it!
Last updated: 2025-10-01

What happened to Python? ^{CODESYS Forge talk (Thread)}
What happened to Python?
Last updated: 2025-10-01

Visualization XY Charter Question ^{CODESYS Forge talk (Thread)}
Visualization XY Charter Question
Last updated: 2025-10-02

Post by jy77812 on Visualization XY Charter Question ^{CODESYS Forge talk (Post)}
Hello. I'm using Visualization XY Chart, and when I mark a circle through XY position data, a blue line is displayed in the circle with a red circle. At this time, can't I set the blue line not to be seen in the circle? Currently, whenever XY position is drawn, the line follows.
Last updated: 2025-10-02

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Thank you for the response, The empty softcontainer does not become visible unfortunately, but I think I can get that back to working. I think I'm misunderstanding something. You are pointing to the Softcontainer number and the ticket code, I thought that I needed to fill in the virtual control containers serial code is this a misunderstanding? And if this is indeed the case, how is the link between the server (softcontainer) and the Codesys control docker container made? If I have multiple Codesys docker containers running on the same docker server, how is the correct license distributed to the correct Codesys runtime container?
Last updated: 2025-10-02

Post by gseidel on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Hi imdatatas, thanks for your detailed and thoughtful feedback. We will discuss the topic in our team. Best regards, Georg
Last updated: 2025-10-02

MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl [ERROR] ^{CODESYS Forge talk (Thread)}
MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl [ERROR]
Last updated: 2025-10-02

The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Thread)}
The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic
Last updated: 2025-10-02

Post by gseidel on MC_MoveAbsolute: C0138: No matching 'FB_Init' method found for instantiation of SMC_MoveAbsRelPerformerImpl [ERROR] ^{CODESYS Forge talk (Post)}
Hi imdatatas, sorry to hear this issue caused so much overhead for you. Frankly, I'd expect a project created with an older version to compile without errors after opening > it with the latest Codesys version and updating all libraries. Yes, that is a reasonable expectation. I tried a few times but could not reproduce the problem. In case you run into the problem again, we can investigate the issue if you send a project archive. Best regards, Georg
Last updated: 2025-10-02

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Dear Tim, This is the missing link for me. I was not aware of the fact that the docker container is claiming the smallest possible license. Now the serial number makes much more sense. Thank you
Last updated: 2025-10-02

Post by timvh on Licensing info not available. ^{CODESYS Forge talk (Post)}
In the VPLC configuration settings there is an entry for the IP address of the license server. In this setting fill in the IP address of your device (host IP address). Then when the virtual PLC starts up, it will get the license from the license container on the host. You can do this for all VPLC's running on your device. The VPLC will always take the smallest license which fits the required license. So if you have 2 licenses for VPLC's with small and large applications, then this will work fine if you start up one VPLC which requires the small license and the other which requires the large license. PS, personally I find it much easier, especially for testing and experimenting, to activate the licenses on a CODESYS (USB) key. This is easy to activate (on your development PC) and easier to move to another device. Addtionally you don't loose the license when you need to install a completely new image on the device.
Last updated: 2025-10-02

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Thank you all, The license is working now!!
Last updated: 2025-10-02

Licensing info not available. ^{CODESYS Forge talk (Thread)}
Licensing info not available.
Last updated: 2025-10-02

Post by dogulas on numeric text box control ^{CODESYS Forge talk (Post)}
I am using TargetVisu in my v3.5 sp20 p6 (64-bit) project. I see no control that will allow me to bind, edit, and display a LREAL variable. Am I missing a library? If it exists, why can't I see it?
Last updated: 2025-10-02

Post by dogulas on numeric text box control ^{CODESYS Forge talk (Post)}
Ok, this is how I made a numeric text field: use a Text Field properties -> Texts -> Text := %f (or %d or whatever you need) properties -> Text variables -> Text variable := (your numeric variable) properties -> Input configuration -> OnMouseDown -> Configure: Write Variable Input type := VisuDialogs.Numpad Use another variable (your numeric variable) Min val Max val etc. Please tell me there is an easier way to do this.
Last updated: 2025-10-02

numeric text box control ^{CODESYS Forge talk (Thread)}
numeric text box control
Last updated: 2025-10-02

Post by nchau on Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Post)}
Yes, that's correct. I registered and visited the page at https://en.estun.com/?list_139/1380.html , but there were no ESI files available under the Data Download section. I also tried contacting the manufacturer directly, but haven’t received any response yet.
Last updated: 2025-10-03

Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Thread)}
Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT)
Last updated: 2025-10-03

Post by jzhvymetal77 on Special Chars in Visualizationfor QR code string ^{CODESYS Forge talk (Post)}
Ok, I got UTF-8 encoding working by encoding the full block character using [16#E2, 16#96, 16#88], which corresponds to U+2588 "█". Moving forward, I’ll use this for creating a QR code with Version 10-M (byte mode). This version allows up to 213 characters to be encoded.
Last updated: 2025-10-04

Special Chars in Visualizationfor QR code string ^{CODESYS Forge talk (Thread)}
Special Chars in Visualizationfor QR code string
Last updated: 2025-10-04

Post by caliberbishop on Having trouble using the Web Client SL library ^{CODESYS Forge talk (Post)}
Hello, I'm trying to use the Web Client SL library, I installed it in the IDE (did not purchase a license yet, as this is still a proof of concept so demo mode is good enough) and added it to the library manager. However, when trying to define a FB of the type WebClient I get a "Identifier 'WebClient' not defined" error message, setting the type to Web_Client_SL.WebClient did not work as well. Opening the example project the FBs defined there give the same error message. From the problem in the example project I deduce this is not a syntax problem, so maybe a license problem, but there should be a working demo mode, so what am I missing? IDE v 3.5.21.30 Library v 1.12.0.0 Thanks
Last updated: 2025-10-04

Sort by relevance or date