Post by gatto on Undertanding Application Based Licenses ^{CODESYS Forge talk (Post)}
Hi, i think you are right. Did you press the key shopping cart? Codesys tells you the license. What I don't appreciate is that i need an additional license for communication. The system reports opc ua but this cheats you. This is communication that also concerns the tag symbols that codesys eth v3 exchanges with an operator panel. Attached is a screenshot of my case where you can see that communication opc ua is cheating you. 512 tags included in the program license are few. So, I had to buy 2 licenses. one for the program and one for communication. I don't like this policy.
Last updated: 2024-11-11

Post by mp9876 on Device logon problem following fresh install ^{CODESYS Forge talk (Post)}
All screenshots are enclosed in MS Word document. NOTE; 4 questions features at the end. Any assistance would be greatly appreciated! Hi everyone, I am still having device logon problem following a fresh install Here are the STEPS I went through following a FRESH CODESYS Win 64 3.5.19.60 install on a different computer. ‘Gateway not configured properly’ when attempting to REFRESH from the Users and Groups. Then did Gateway manage and confirmed it was ok: This message popped out as it was a fresh install: YES then: Initially went with Administrator twice (user & password) but it did not like it. No device is responding to …: Continued by setting a new user Pressed OK and obtained the following message: Stopped and Restarted PLC at that point: Obtained the following: Attempted to login a 2nd time without success. Then I scanned the network to see if matching device can be detected: Only way to get it detected was to remove the tick in the ‘Hide non-matching devices…’ Attempted a WINK but got a return like this one: REFRESH either @ Users and Groups or @ Access Rights returns: Then created user ‘mp’ at Project level ang logged in: Understandably device user mp9876 was not valid for the Project. Device information A few questions comes to my mind following these connection attempts: 1- Gateway not configured properly message pops out because of a non-compatible device ? 2- Why would the device not be compatible ? 3- Any way to make the device compatible ? 4- Any ideas on how to get this connectivity problem to the device solved ?
Last updated: 2024-03-17

Post by peter-skokanek on Raspberry and problem with runtime ^{CODESYS Forge talk (Post)}
Hi, Similar problem, I have license for Raspberrypi Control MC SL. It didn't work with version 4.10.0.0. I have now instaled new version 4.11.0.0. Raspberrypi Control SL. The same behavior, runtime works sometime several minutes, sometime only several seconds. The second problem is with license. There isn't available any runtime MC SL on Codesys shop, not even older version 4.10.0.0. Is it only temporarily or, MC SL will be not available more for rpi?
Last updated: 2024-02-27

Post by martinlithlith on Device User Logon and No device is responding.. Pi4b codesys 3.5 SP19 2 + (64-bit) ^{CODESYS Forge talk (Post)}
Hi! Im slowly starting to loose it and i need som help! After a few night of reading up and testing i´m still stuck as a rock and you guys and girls are my last resort for this project. Basic facts; Win 11 Codesys 3.5 SP19 2 + (64-bit) Raspberry pi 4 model b 2 gb Raspian release 11 aarch64 What keeps me up late at night; Username and Password when trying to connect to device and device only beeing connectable for a few seconds. Some of the things I have tried; Username and passord; Credientials from the raspberry Administrator Administrator admin admin Admin Admin administrator administrator Usernames and passwords that I sometimes use (this was a longshot i know, but i was running out of ideas and energy). :) Epand filesystem, activating i2c, spi, 1-wire I can start the gateway and start the runtime. I cant install the edgearm64, arm64 runtime package eventhough I guess i should, i get code [ERROR] Error output: dpkg: error processing archive /tmp/codesysedge_edgearm64_4.8.0.0_arm64.deb (--install): [ERROR] Error output: package architecture (arm64) does not match system (armhf) [ERROR] Error output: Errors were encountered while processing: [ERROR] Error output: /tmp/codesysedge_edgearm64_4.8.0.0_arm64.deb code as a respons. I have tried to Reset Origin Device - no change. I have tried to remove the /etc/CODESYSControl_User.cfg [CmpUserMgr] but i could not find it and i was not sure if i should add it instead but i did not want to mess somthing up. I have tried to create a second gateway with the specific ip if the pi, that did not help. Could it be that i´m currently connected to the pi through WIFI? I can ping the pi and I can connect and control it through VNC. When i scan to select gateway target (scan edge gateway) i find 17-21 devices but can find the pi throug the mac adress. I started of trying to use the "CODESYS Control for Raspberry Pi SL" (I have a license sience earlier) as i read somewhere that this could be used on a Pi4 as well but now i´m trying with the MC SL, no changes, same problem. Right now - gateway version 4.8.0.0 (edgearmHF, armhf), Runtime Package 4.5.0.0 (raspberry, armhf). Any sugestions are very welcome! As mentioned above, theese are some of the things that i have tried/done - but i have been going at this for a while. Best, Martin
Last updated: 2023-09-10

Post by docker on Canopen connection. Unknown node id. ^{CODESYS Forge talk (Post)}
hi, i am currently trying to adapt an i/o device for a project. the node id is unknown and there is no eds file available. no data is being emitted from the device as a giveaway, the baudrate is known but useless without the node id. is there an sdo request available to determine the id? i cannot get the device to leave pre op status even with a global nmt request. please help. no hair left.
Last updated: 2023-09-25

Post by spiessli on Softmotion axis to CANopen Maxon IDX drive ^{CODESYS Forge talk (Post)}
Hi, I want to use Maxon IDX drives for some simple robotic applications. I have used Maxon's Epos for generating a DCF file to import in Codesys (attached). Then I can add the IDX motors under a CANopen manager in the device tree. Unfortunately, I cannot add a "softmotion axis" to the IDX motors. Now I am wondering, why? Without being able to attach a softmotion axis to the device in the device tree, the use of the motor is greatly reduced... spiessli
Last updated: 2024-01-05

Post by mp9876 on Device User Logon ^{CODESYS Forge talk (Post)}
Just adding some info regarding the issue above. Logged onto the project using dev3og5 user (see screenshots); appeared to be ok although when attempting to logon to the device message says 'currently not authorized to perform this operation on the device' (screenshot). If user dev3og5 has same permissions as Owner user; why would it not be authorized. I am at a loss; any assistance would greatly be appreciated. Thank you Mike
Last updated: 2024-03-16

Post by yongchaow on Can't connect to Device Raspberry Pi 4 from CODESYS IDE V3.5 SP19 ^{CODESYS Forge talk (Post)}
Hi, eschwellinger, I have the same problem, but I can not resolve the problem following this forum. There are my situation: pi@RevPiXXXX:~ $ uname -a Linux RevPiXXXX 5.10.120-rt70-v7l #1 SMP PREEMPT_RT Thu, 28 Jul 2022 10:36:48 +0200 armv7l GNU/Linux After "top": It looks like runtime is not running. One more piece of information to refer to, when I reboot the device it is possible to scan the device. Looking forward your reply.
Last updated: 2024-04-25

Post by winki on Modbus TCP Client ^{CODESYS Forge talk (Post)}
Hello, I am new on CODESYS env. I would like to do some Modbus TCP, but I am wondering If using codesys you must use the device "Modbus_TCP_Client" & "Modbus_TCP_Server". I would like to do it without device, only using ST. Is that possible ? I try the example : MODBUS_master_example, but it is not working. If it is possible to dot it without any Device I will show my code. Thx a lot
Last updated: 2024-10-25

Post by patrik on CODESYS Control for Raspberry Pi SL on Raspberry Pi 4b ^{CODESYS Forge talk (Post)}
Hi! I'm 99% sure I'm running CoDeSys on a raspberry pi 4b. just be aware that there is a separate license for running it on multiple cores. https://store.codesys.com/en/codesys-control-for-raspberry-pi-mc-sl.html
Last updated: 2023-09-05

Post by martinlithlith on CODESYS Control for Raspberry Pi SL on Raspberry Pi 4b ^{CODESYS Forge talk (Post)}
Feedback: I have a raspberry pi 4 (not + as in original question). It works fine to run the CODESYS Control for Raspberry Pi SL license on a pi 4.
Last updated: 2023-10-17

Post by janber0206 on RPI is license server down ^{CODESYS Forge talk (Post)}
I had the same problem. Problem solved: all licences purchased before October 2022 must be updated by Codesys. To do so, simply contact the support in the Codesys Store.
Last updated: 2023-10-30

Post by mavitia on Application based license problem - Modbus TCP ^{CODESYS Forge talk (Post)}
raspberry pi is running ubuntu, so it has the codesys control for linux arm 64 bit, IDE is 3.5.19, both were installed last week from the latest versions online, im currently out of the PC but will upload some evidence ASAP
Last updated: 2023-12-18

Post by reinier-geers on Add licence ^{CODESYS Forge talk (Post)}
Ive got the license dongle. But hey cant see it. When i put in a stick the contoller detects the stick. When i stick the dongle it doesnt detect. So 2 options from codesys who doesnt work
Last updated: 2024-01-05

Post by mavitia on Issue with TargetVisu on Codesys Control Win ^{CODESYS Forge talk (Post)}
anyone else running into the same issue: perform a repair install on the runtime, that should fix it without affecting license.
Last updated: 2024-02-02

Post by reinier-geers on Compile error ^{CODESYS Forge talk (Post)}
Ive got a project version 16p3 Running on Epis( 32) . Codesys cant see License stick on Epis and no one can tell me why. So Got me a Crist(64). Change version to version 18.4 But then i get dialog libry problems. Anyone knows why ?
Last updated: 2024-02-22

Post by eschwellinger on Raspberry and problem with runtime ^{CODESYS Forge talk (Post)}
Are you using Bookworm and which Rasperry PI? Check the logfile with ssh connection tail -f /var/opt/codesys/codesyscontrol.log It should work with 4.11.0.0 release. Just use the ABL licenses - (check the license metrix of your application)
Last updated: 2024-02-27

Post by cavein on PFC100 Licensing fails ^{CODESYS Forge talk (Post)}
Hi, i have a similar problem. im using pfc200 4.5.0.0. There are two softcontainer and only one with license in it. every 1-2 hrs it will auto logoff. i tried the steps above but i dont find the /var/opt/codesys/.cmact_licenses i need help please.
Last updated: 2024-03-19

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Post by baradejoo on PubSub communication - example ^{CODESYS Forge talk (Post)}
Hi, Recently, I purchased a license for PubSub communication from the CODESYS store. Unfortunately, after installation, I couldn't find any example code in the files. Is there anyone who can share such an example/send links or help with writing such communication in ST language?"
Last updated: 2024-03-25

Sort by relevance or date