Post by jarnok on How to know if output if function block is used ^{CODESYS Forge talk (Post)}
Hi, Is it possible to know of an output of a function block is used? I've found there is a way to find unused inputs of a fb, through the attribute: is_connected. But I'm wondering if the same can be done for an output. Thanks in advance!
Last updated: 2024-10-15

Post by pascaljt on Warning code C0373 ^{CODESYS Forge talk (Post)}
Hello, I wrote a function block for a controller but I have a warning code C0373 "expression or part of it has no effect" and the sub routine which contain my function block is underlined in blue. Despite, the FB works perfectly. Do you know why I have this warning ? Thanks. Pascal.
Last updated: 2024-10-30

Post by trusty-squire on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
Just a stab in the dark, but you might want to check the Dynamic Limits (accel, decel, velocity, jerk) in the Codesys SoftMotion device configuration, as well as checking similar limits on your servo drive? Are you seeing any errors, or does the MC_SetPosition FB get marked as complete?
Last updated: 2025-01-09

Post by winki on Warning attribut no_assign ^{CODESYS Forge talk (Post)}
Hello, I have two warning on my code, and I would like to understand why. C0540: Attribut 'no_assign' missing for the 'FB_MOdbusReadHolding'. The type of the variable clientTcp is set to 'no_assign'. In this FB, I have done: clientTcp : ModbusFB.ClientTCP; clientRequest : ModbusFB.ClientRequestReadHoldingRegisters; The error comes from clientTcp : ModbusFB.ClientTCP; I am using ModbusFB 4.4.0.0. Thx a lot
Last updated: 2025-01-10

Post by winki on Warning attribut no_assign ^{CODESYS Forge talk (Post)}
Hello, I have two warning on my code, and I would like to understand why. C0540: Attribut 'no_assign' missing for the 'FB_MOdbusReadHolding'. The type of the variable clientTcp is set to 'no_assign'. In this FB, I have done: clientTcp : ModbusFB.ClientTCP; clientRequest : ModbusFB.ClientRequestReadHoldingRegisters; The error comes from clientTcp : ModbusFB.ClientTCP; I am using ModbusFB 4.4.0.0. Thx a lot
Last updated: 2025-01-10

Post by kevinm on Attaching Trace variable to Frame Configuration Variable ^{CODESYS Forge talk (Post)}
Is it possible to show a variable from a Frame Configuration in a Trace on that Visualization? I want to pass the FB for an AXIS_REF_ETC_SoE_Standard to the visualization and display live axis data in the visualization. However, I cannot find a way to use a Frame Configuration variable in the Trace Configuration dialog.
Last updated: 2025-04-04

Post by ustad41 on Cam Blending ^{CODESYS Forge talk (Post)}
Hi everybody, I want to execute more than once cam fb simultaneously so blending cam and thus blending velocity without stop motion. But as far I know codesys dont support directly cam blending. But I beleeive there is a some solving. I request your support. But there is important thing is I want to change cam table cam on the fly. For example FlyingSaw application change cutting lenght.
Last updated: 2025-08-01

Post by r0udy on Adress problem ^{CODESYS Forge talk (Post)}
Hi, I 've just started a new project. Translating SoMachine (SCHNEIDER) to CODESYS 3.5.18//DEMO (EATON XC303) I succeed (I think so) to copy FB, STRUCT,... and I also integrated old library. When I build F11, I have a first problem : - Adress out of rang - Overlay It's strange, usually %ML100 > %MB800 Here ONLINE: %ML100 > %MB100 !! I don't understand why ? And idea ? Thanks
Last updated: 2025-08-06

Post by gseidel on Dynamic target position tracking ^{CODESYS Forge talk (Post)}
Hi kporter, a more direct way would be to use SMC_FollowPosition to write the set positions directly to the servo drive. This FB has reacts on changes of the fSetPosition on each call, without a need for a rising edge on Execute. See https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Movement/Direct/SMC_FollowPosition.html. Best regards, Georg
Last updated: 2025-09-08

Post by aniket-b on How to protect library project? ^{CODESYS Forge talk (Post)}
I have library projects which has few function blocks. I have assigned security to each FB. I want to protect them and user can only be able to use it without viewing the code inside. What kind of file I should send to user? Is it compiled library file?
Last updated: 2024-01-22

Post by rmaas on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
Hi, Im not sure if this is what you mean, but i do succesfully use the IoDrvEthercatLib.ETCSlave.InputData and IoDrvEthercatLib.ETCSlave.OutputData to read from and write to beckhoff DI and DO cards. Very convenient as you can make an FB with an VAR_IN_OUT of type IoDrvEthercatLib.ETCSlave and only have to pass the slave reference... So i am not using .ETCSlave_Diag but .ETCSlave...
Last updated: 2024-02-13

Post by xabier on No work Control Torque Codesys with Drivers M751 Control Techniques ^{CODESYS Forge talk (Post)}
I have a Control Techniques M751 driver that I'm controlling with a codesys-based PLC.... I want to implement a rate-limiting torque control. How could I do it??.. Is there any FB from codesys that allows me to do it?? Thank you
Last updated: 2024-03-13

Post by xabier on No work Control Torque Codesys with Drivers M751 Control Techniques ^{CODESYS Forge talk (Post)}
I have a Control Techniques M751 driver that I'm controlling with a codesys-based PLC.... I want to implement a rate-limiting torque control. How could I do it??.. Is there any FB from codesys that allows me to do it?? Thank you
Last updated: 2024-03-13

Post by timvh on Change the Opening Position of the Dialog using VU.FbOpenDialog ^{CODESYS Forge talk (Post)}
Probably best to call the FB continuously. So something like this could solve it: IF xOpenLatchSettingDialog THEN xOpenLatchSettingDialog := FALSE; fbOpenLatchSettingsDialog.xExecute := TRUE; END_IF IF fbOpenLatchSettingsDialog.xDone OR fbOpenLatchSettingsDialog.xError THEN fbOpenLatchSettingsDialog.xExecute := FALSE; END_IF TopLeftDialog.iX := 100; TopLeftDialog.iY := 23; fbOpenLatchSettingsDialog( itfClientFilter:= VU.Globals.OnlyTargetVisu, sDialogName:= 'visu_AlarmLatchSettings', xModal:= TRUE, pTopLeftPosition:= ADR(TopLeftDialog) );
Last updated: 2024-05-09

Post by matthew on New Ladder Diagram conversion does not work due to missing features ^{CODESYS Forge talk (Post)}
Hi @eschwellinger Just wondering if there is any update when the Expression or part of it has no effect will be fixed? Also have the ability to open an FB when online and offline. It would also be great to be able to view the ST code block when online.
Last updated: 2024-05-14

Post by aniket-b on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
Here I have attached the task monitor data. What is very weird is that I am using MC__MoveDirectAbsolute FB, when I choose Vel/ACC/Jerk Factor to 1.0 it run fine. It ran 10 hours without the issue. But I get the error randomly when I use factor as 0.5
Last updated: 2025-12-29

Post by osande on Trend/trace data ^{CODESYS Forge talk (Post)}
Ok, the problem is that the trend/trace system can't read function block instance data. The variables has to be stored directly under the program calling the FBs. Thus, FB variables to be trended/traced must be connected to variables declared in the program. Seems like a bug to me!
Last updated: 2026-03-13

Post by reinier-geers on API webclient ^{CODESYS Forge talk (Post)}
Fur ein jahr ein webclient lisence gekauft. Aber immer funktioniert es noch nich. Mach ik es auf internet bekomme ich daten. Aber mit codesys bekomme ich - Query fehler ... - ein switch die abschalt - oder den controller hangt mal wieder Hat eine dar erfahrung? Kan ich in den FB sehen was da pasiert ?
Last updated: 2026-04-05

Post by reinier-geers on Virtual Api to vieuw what im sending ^{CODESYS Forge talk (Post)}
Hi. Is there a website to test my webclient ? When i do a web api test on internet it works. But with codesys ill get an error. So is there a website to tests what im sending ? or a way to look in to the Codeys FB Webclient ?
Last updated: 2026-04-05

Post by reinier-geers on Virtual Api to vieuw what im sending ^{CODESYS Forge talk (Post)}
Hi. Is there a website to test my webclient ? When i do a web api test on internet it works. But with codesys ill get an error. So is there a website to tests what im sending ? or a way to look in to the Codeys FB Webclient ?
Last updated: 2026-04-05

Post by tyronnosaurus on ReceiveWatchdog FB not working on J1939 P2P PGNs ^{CODESYS Forge talk (Post)}
Hi guys. I've got a device that sends a status message over J1939 and a PLC running Codesys to receive it. This message uses a P2P PGN (as opposed to a broadcast PGN). Codesys can only read it if I mark the J1939_ECU as "Local" (see screenshot 1). The message is received correctly, that is not the problem. The problem is detecting if the message stops being received. Local ECUs have no Watchdog checkbox to detect if the message has been received in the last X seconds. In order to implement a watchdog, I've used a ReceiveWatchdog FB. The same code works well for any non-P2P message, but doesn't work for this particular P2P message I'm trying to monitor. Even if I physically disconnect the device, ReceiveWatchdog.xBusy stays True, and ReceiveWatchdog.xError never triggers due to a timeout error. Is there any caveat in the ReceiveWatchdog FB that makes it unable to monitor P2P PGNs in Local J1939_ECUs?
Last updated: 2024-07-11

Post by grant32 on RAMP_REAL FB is retaining my output value when i try to re use the FB ^{CODESYS Forge talk (Post)}
Hello, I'm relatively new to PLC programming. I am trying to creat a ramp down function, I have an example here of what I am using. I can get the function to work, the issue is that the OUT (variable3) value is being held by the FB so after I use it once it no longer works. In this example i set variable3 to 100 and the rest is as seen, over the course of a minute it ramped down to 10 (as desired). But when I deenergize TEST_START, set variable3 back to 100, and then re-energize TEST_START it immediately jumps back to the previously held value 10. The reset on this block just pauses the function and holds the last OUT. In my case I will need the function to start OUT at a set value, ramp down to the IN (variable2) value, and then accept a new OUT value to ramp down next time the block is energized. Hopefully this made sense, if anyone has any advice that would be awesome!
Last updated: 2024-07-29

Post by danieldiaz on Problem with FB execution ^{CODESYS Forge talk (Post)}
Hello everyone, I've been working on a system which needs an error function, with this purpose I've created a FB programmed in LD, after debugging I run the simulation. It seems that the variable linked to a coil doesn't change the value when the contacts are associated to input variables. When I use internal variables the logic works properly. I don't know if the problem is related to the variables definition or with the logic program. As you can see in the image, I1 and I2 are variables declared on the FB, the rest are input variables. If I force the eStop and Reset signals to TRUE the coil value should change, but it doesn't. However in the second network if I1 is TRUE the coil change to TRUE as it has to be. To sum up, my doubt is why that coil doesn't change its value? I would like someone to shed a light on this. Thanks!
Last updated: 2024-04-02

Post by riccardo on Management of a PLC network from a remote station ^{CODESYS Forge talk (Post)}
Goodmorning, I would need to set a control station that can manage a PLC network. In short I need to access to all visu programmed in any PLC of the network (LAN). I was thinking to use a PLC with buttons that call, by mean an IP address, the visu of any PLC. I don't know if it is possible but I saw that there is a RemoteVisuTarget that run CODESYS Control Win V3. Can someone suggest me how to create a remote main control station from a normal PC? Thanks, Riccardo
Last updated: 2023-11-27

Post by askic on Name Validation of Visualization objects ^{CODESYS Forge talk (Post)}
Hello, In my projects, I'm following this recommendation about the rule names in Codesys https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_rules.html, so I always use backtick identifiers, not only for variables, but also for the object names. However, I have noticed that in the current version of Codesys, when adding Visu object, it is not allowed to used these identifiers in the name. This is very different from all other objects like, folder names, POU names, Variable list names etc. I wonder if there is some hidden settings I can use to enable backtick identifiers in the Visu object names? Attached is a screenshot with the details. Thank you!
Last updated: 2025-01-10

Sort by relevance or date