Post by damian177 on CM4S GPIO's in Codesys ^{CODESYS Forge talk (Post)}
Hi, I am running my application on device based on Compute Module 4S (Cortex-A72 (ARMv8) 64-bit ). On this device I installed RPi Runtime in 4.11.0.0 version. In my project I use device: Codesys Control for Raspberry Pi 64SL and my project works, but I actually do not have acces to all GPIO's , because GPIOs Compute Module is available only in 3.5.16.0 version and it doesn't work. Properly work GPIOs B+/Pi2 but using this device I do not have acces to all GPIO's in CM4S. Anyone of can tell me how add GPIOs Compute Module 4.11.0.0 to my project ?
Last updated: 2024-05-28

Post by kuegerls on SysProcessExecuteCommand2 and CANopen Device ^{CODESYS Forge talk (Post)}
I am now executing the process in a separate task with lower priority, but unfortunately, the connection to the master is still interrupted.
Last updated: 2024-06-21

Post by eschwellinger on Adding a Softmotion License to a Weintek HMI ^{CODESYS Forge talk (Post)}
You need to ask Weintek if they support the licensing. For Softmotion the device should be realtime capable.
Last updated: 2025-10-17

Post by davidbo on Toradex and CODESYS and licensing ^{CODESYS Forge talk (Post)}
Does it mean that the USB dongle has to be inserted all time in order, for the device running in licensed mode?
Last updated: 2025-10-20

Post by wchin on Passing EtheNetIP adapter device into a Function Block to access it's IO ^{CODESYS Forge talk (Post)}
We are creating helper function blocks for our VFD(EtherNetIP). How should I set it up so that I can pass the device into and out of the Function Block so that ideally I can access the IO of the device by devicename.channelname. So something like for example we have a VFD with a start bit that is in the ControlWord channel and a SetVelocity that is a channel. And we want to create a Function Block called StartVFD. So I declare something like: FUNCTION_BLOCK StartVFD VAR_IN_OUT device: ioDrvEthernetIP.RemoteAdapter; END_VAR VAR_INPUT velocity : REAL; So in the code it would look something like device.SetVelocity := velocity; device.ControlWord.6 := True; We have a pretty basic eds file for our VFD and can update it if necessary. Thanks in advance.
Last updated: 2025-10-28

Post by wchin on Passing EtheNetIP adapter device into a Function Block to access it's IO ^{CODESYS Forge talk (Post)}
We are creating helper function blocks for our VFD(EtherNetIP). How should I set it up so that I can pass the device into and out of the Function Block so that ideally I can access the IO of the device by devicename.channelname. So something like for example we have a VFD with a start bit that is in the ControlWord channel and a SetVelocity that is a channel. And we want to create a Function Block called StartVFD. So I declare something like: FUNCTION_BLOCK StartVFD VAR_IN_OUT device: ioDrvEthernetIP.RemoteAdapter; END_VAR VAR_INPUT velocity : REAL; So in the code it would look something like device.SetVelocity := velocity; device.ControlWord.6 := True; We have a pretty basic eds file for our VFD and can update it if necessary. Thanks in advance.
Last updated: 2025-10-28

Post by wchin on Passing EtheNetIP adapter device into a Function Block to access it's IO ^{CODESYS Forge talk (Post)}
We are creating helper function blocks for our VFD(EtherNetIP). How should I set it up so that I can pass the device into and out of the Function Block so that ideally I can access the IO of the device by devicename.channelname. So something like for example we have a VFD with a start bit that is in the ControlWord channel and a SetVelocity that is a channel. And we want to create a Function Block called StartVFD. So I declare something like: FUNCTION_BLOCK StartVFD VAR_IN_OUT device: ioDrvEthernetIP.RemoteAdapter; END_VAR VAR_INPUT velocity : REAL; So in the code it would look something like device.SetVelocity := velocity; device.ControlWord.6 := True; We have a pretty basic eds file for our VFD and can update it if necessary. Thanks in advance.
Last updated: 2025-10-28

Post by eschwellinger on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
Hi, just use the deploytool to deploy the Timeprovider on this external device: An set the IP of you SafeControl PLC
Last updated: 2025-11-18

Post by martinlithlith on Device User Logon and No device is responding.. Pi4b codesys 3.5 SP19 2 + (64-bit) ^{CODESYS Forge talk (Post)}
Hi, Thank you for your reply! What should be the version 4.9.0.0? I have a user named pi on the pi, thats what i´m using as credientials to be able to for example update/install runtime. Or do i need another user? once agin, thank for the reply! Martin
Last updated: 2023-09-11

Post by transmin01 on EL6751 Canopen_Manager issue ^{CODESYS Forge talk (Post)}
Hi, I have a Beckhoff EL6751 EtherCAT / CANopen gateway which fails on the Canbus when the CANopen_Manager is added. Currently no devices are connected to the EL6751. If I add a device, I get the same issue. If I add a device and connect the bus, I get the same issue. Is there something I am doing wrong? Regards Trevor
Last updated: 2023-09-12

Post by laruso on Runtime device Enable/Disable procedure ^{CODESYS Forge talk (Post)}
I implemented the parts from the CAA Device Diagnosis Example.project and could use it for switching on and off, the CAN devices that were located under the CANbus and CANopen_Manager. But i can't do the same with I2C_master_test_version or devices below this one. In the example project there is only the EtherCAT Master, CANbus and CANopen_Manager, and Ethernet with devices below.
Last updated: 2023-10-27

Post by awatson on User Management - REFERENCE TO VisuUserMgmtProvider ^{CODESYS Forge talk (Post)}
Hello Guys I have IFM CR1140 screens that I want to use the basic user management Elements on - But I am trying to figure out where I am going wrong with the References "REFERENCE TO VisuUserMgmtProvider" The Device will look after the security itself - I have enabled the User Management in Visualization Manager and added an admin user to the device and sync'd.
Last updated: 2023-11-17

Post by boris on EtherCAT error: the device is deactivated ^{CODESYS Forge talk (Post)}
Hi, I am currently working in BCS-tools (basiscally codesys) and I am trying to run the GN-9386 network adapter in the EtherCAT_master , but when I run the program the Ethercat status shows the error: ''The device is deactivated''. I don't know what to do right now. Can someone explain me how to fix this error? regards, Boris
Last updated: 2024-10-02

Post by lsislsis on SIGABRT Error ^{CODESYS Forge talk (Post)}
After many tests i see that problem comes when serial communication established for modbus rtu. If the slave device not connected we don't see the exception. If the slave device connected at serial port then we have exception about 1 hour after startup and every 10 or 15 minutes. Any suggestion?
Last updated: 2024-11-08

Post by wbj0t on one variable signed to modbus tcp server device and modbus serial device ^{CODESYS Forge talk (Post)}
Hi. Raspberry pi 4 runtime. Runtime version 4.16, IDE version 3.5.21. Is it possible write new value for variable via modbus tcp or serial devices when both enabled? As I see - not. What can I do? It is terrible restriction.
Last updated: 2025-07-17

Post by onstage on Unable to add EL6751 to Control RTE V3 on W11 IoT LTSC using Eng. V3.5 SP21 ^{CODESYS Forge talk (Post)}
I have working EtherCAT since it can be scanned for slaves, but then I'm stuck getting the information that the device isn't found in the repo. As far as I can see both revisions does however exist in the device repo. Component added in the Configfile. Anyone with some similar experiences?
Last updated: 2025-09-04

Post by kporter on Removing <Empty> node in Device Tree ^{CODESYS Forge talk (Post)}
I initially created a SoftMotion axis for my EtherCAT CoE drive. I wanted to change it to use SoftMotionLight so I deleted the SM node, which left an <empty> node. I created the SML device, but the <empty> node remains. How can I remove that from the tree? </empty></empty>
Last updated: 2025-09-06

Post by rickwot809 on Codesys Soft PLC OPC UA server ^{CODESYS Forge talk (Post)}
Enabling Anonymous Login 1. Navigate to 'Device' > 'Communication Settings' > 'Device'. 2. Next, click on 'Change Runtime Security Policy'. 3. In the new window, find and check the box for 'Allow anonymous login'. After completing these steps, you should be able to communicate with the OPC UA server.
Last updated: 2025-09-11

Post by dhumphries on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
I have a video demonstrating the procedure to install the runtime on a linux device. https://youtu.be/rj0dOhgnGjs?si=OJoA-kgc1saxIweR This demonstration shows how to install the runtime on a X86 based controller, it should be the same for an ARM based device, but you'll need to install the add-in for Codesys control for Linux ARM SL (or the 64 bit add-in.)
Last updated: 2023-12-30

Post by masmith1553 on SDO generation ^{CODESYS Forge talk (Post)}
If you add any device to the CANOpen Manager it will send messages to verify the device is on the network. Do you have the Enable expert settings check box checked in the General tab? have you added any SDOs in the SDOs tab? I avoid using the CANOpen Manager and just use the CAN_Tx and CAN_Rx blocks from the library.
Last updated: 2024-01-25

Post by kimnegw on Codesys offline license batch ^{CODESYS Forge talk (Post)}
Hey guys, I'm currently developing a Codesys application for an offline Linux device. I can easily set up the license for ONE device using my Windows PC, but what happens if I need to produce a thousand devices? Is there any method to automate license insertion? I have already generated a dpkg installer for deploying the Linux control application to multiple targets. Thanks,
Last updated: 2024-04-04

Post by mehmetembedded on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
Hello. I am using TI AM64x evaluation board TMDS64EVM. It has 8 leds connected via I2C to SoC.I wanna control them via codesys GPIO device. Is that possible? If so how I can do it. I had no problem installing codesys runtime, and running program on device. But when it comes to GPIO access, It couldn’t make it.
Last updated: 2024-05-08

Post by mehmetembedded on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
Hello. I am using TI AM64x evaluation board TMDS64EVM. It has 8 leds connected via I2C to SoC.I wanna control them via codesys GPIO device. Is that possible? If so how I can do it. I had no problem installing codesys runtime, and running program on device. But when it comes to GPIO access, It couldn’t make it.
Last updated: 2024-05-08

Post by sturmghost on Specify Input Configuration "OnDialogClosed" Action to only react to certain Dialogs ^{CODESYS Forge talk (Post)}
You could work around this problem by implementing some sort of "state machine". Each dialog sets a boolean variable when they are closed so you know which dialog was closed. Then you can react to this accordingly.
Last updated: 2023-10-01

Post by awatson on User Management (Configuration Dialog) ^{CODESYS Forge talk (Post)}
Hello I have just posted on a topic - about the reference for the element you have taken a screen shot for - "REFERENCE TO VisuUserMgmtProvider" https://forge.codesys.com/forge/talk/Visualization/thread/0591457fe4/ - do you know anything about it?
Last updated: 2023-11-17

Sort by relevance or date