Post by fcmtw on SDO generation ^{CODESYS Forge talk (Post)}
Hi, When I'm adding a CANOpen device in my WAGO CANOpen Manager, CODESYS automaticaly generates some SDO's that I can't directly disable. From what those SDO's are generated ? I'm not finding anything about it in the EDS files. Also, is there a way to disable the automaticaly generated SDO and execute the manualy created ones ? Regards, Florian
Last updated: 2024-01-23

Post by gseidel on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
Hi SLUCodesys, dwErrorId is a drive specific error number. The drive documentation should be consulted to interpret it. (Note that you should use MC_ReadAxisError to read this error, see https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/MC_ReadAxisError.html. Accessing the internal variable will result in outdated values if the acis error is not mapped by PDO and is not recommended in general.) uiDriveInterfaceError holds errors of the SoftMotion driver for the drive. It is also an internal variable, not intended for direct access. It is intended for logging, the PLC log will contain the drive interface error, consisting of this number and an error text. My recommendation for handling axis errors in the CODESYS application: 1) Use MC_ReadStatus on the axis to find out whether it is in state Errorstop 2) If in Errorstop, there are two possibilities: an error reported by the drive (MC_ReadAxisError) or an error of the SoftMotion function blocks (output MC_ReadStatus.FBErrorOccured). 3) If there is no drive error, you can use SMC_ReadFBError https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/FBError/SMC_ReadFBError.html Best regards, Georg
Last updated: 2025-09-24

Post by anhkdv on Motion FB Error ^{CODESYS Forge talk (Post)}
Last updated: 2023-10-08

Post by valentinakern on error device ^{CODESYS Forge talk (Post)}
Last updated: 2024-02-06

Post by anttimurtsi on Html5 controls error ^{CODESYS Forge talk (Post)}
Last updated: 2024-02-07

Post by rckalex on Data Source Error 418 ^{CODESYS Forge talk (Post)}
Trying to connect to a Codesys V3 datasource but am unsuccessful. The error information for the datasource reads: Failed (not nearer specified) Error ID: 418 Can anyone shed light on what that error means?
Last updated: 2024-03-06

Strange: CodeSys outbound/send messages seen by hardware but not by SocketCAN (inbound/read is OK) ^{CODESYS Forge talk (Thread)}
Strange: CodeSys outbound/send messages seen by hardware but not by SocketCAN (inbound/read is OK)
Last updated: 2020-09-29

Read values in V3.5 SP9 Patch 5 vs V3.5 SP13 Patch 2 ^{CODESYS Forge talk (Thread)}
Read values in V3.5 SP9 Patch 5 vs V3.5 SP13 Patch 2
Last updated: 2019-02-11

Unexpected behavior in cyclic encoder read method during INT overflow (wrap-around) ^{CODESYS Forge talk (Thread)}
Unexpected behavior in cyclic encoder read method during INT overflow (wrap-around)
Last updated: 2025-05-13

Programming Turck BL67-PG-EN-IP To Read/Write RFID Tags ^{CODESYS Forge talk (Thread)}
Programming Turck BL67-PG-EN-IP To Read/Write RFID Tags
Last updated: 2011-02-22

Convert and String to an expression read by the runtime ^{CODESYS Forge talk (Thread)}
Convert and String to an expression read by the runtime
Last updated: 2012-01-09

[SOLVED][ModBus TCP/IP] How to read data from thermostat. ^{CODESYS Forge talk (Thread)}
[SOLVED][ModBus TCP/IP] How to read data from thermostat.
Last updated: 2017-06-08

read SVN-revisions of project and library insinde a library function ^{CODESYS Forge talk (Thread)}
read SVN-revisions of project and library insinde a library function
Last updated: 2018-05-16

How to read SD card data and store in array ^{CODESYS Forge talk (Thread)}
How to read SD card data and store in array
Last updated: 2012-11-26

Rpi Modbus TCP Slave Single Coil and Discrete Input read strange behaviour ^{CODESYS Forge talk (Thread)}
Rpi Modbus TCP Slave Single Coil and Discrete Input read strange behaviour
Last updated: 2020-11-03

How can I read and writie on the canbus without CANopen ^{CODESYS Forge talk (Thread)}
How can I read and writie on the canbus without CANopen
Last updated: 2019-10-01

PI + Beckhoff IO + CODESYS -- Issue with I/O Channels being Read/Updated ^{CODESYS Forge talk (Thread)}
PI + Beckhoff IO + CODESYS -- Issue with I/O Channels being Read/Updated
Last updated: 2018-12-26

I cannot use SysFile to open/read/write/close - RTS_IEC_HANDLE not defined ^{CODESYS Forge talk (Thread)}
I cannot use SysFile to open/read/write/close - RTS_IEC_HANDLE not defined
Last updated: 2017-09-22

Call python script for codesys from powershell and read return value ^{CODESYS Forge talk (Thread)}
Call python script for codesys from powershell and read return value
Last updated: 2020-07-30

Read real values in a .txt files with SysFileRead: possible? ^{CODESYS Forge talk (Thread)}
Read real values in a .txt files with SysFileRead: possible?
Last updated: 2013-01-30

Wago_IO-Link Master 750-657 unable to read all data frame ^{CODESYS Forge talk (Thread)}
Wago_IO-Link Master 750-657 unable to read all data frame
Last updated: 2022-06-10

How do you change the 'read offset' of a Modbus channel on the fly? ^{CODESYS Forge talk (Thread)}
How do you change the 'read offset' of a Modbus channel on the fly?
Last updated: 2021-04-14

How can I read from one directory all the file names? ^{CODESYS Forge talk (Thread)}
How can I read from one directory all the file names?
Last updated: 2018-01-04

How to read the status of one Modbus Slave in the codesys program ^{CODESYS Forge talk (Thread)}
How to read the status of one Modbus Slave in the codesys program
Last updated: 2021-08-15

how read analog value from Arduino Uno in Raspberry pi through I2 C protocol ^{CODESYS Forge talk (Thread)}
how read analog value from Arduino Uno in Raspberry pi through I2 C protocol
Last updated: 2022-05-30

Sort by relevance or date