Post by bmatlove on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
I'm trying to firm up alarming of axis faults. Declutter the code and figure out what's what. Diving into it, I see the AXIS_REF_SM3 function block provides uiDriveInterfaceError and dwErrorId, but I can't find any significance of these further than Drive interface error number Parameter number: 1014 and Drive specific error identifier, parameter number: 1031, respectively. Is there some corresponding appendix I could use to decode these? Also, is there any relation to the Error ID (of type SMC_Error) of the MC POUs? MC_Jog, MC_Reset, MC_MoveRelative, etc? If so, are the above errors redundant? Thanks in advance.
Last updated: 2025-09-22

Post by gseidel on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
Hi SLUCodesys, dwErrorId is a drive specific error number. The drive documentation should be consulted to interpret it. (Note that you should use MC_ReadAxisError to read this error, see https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/MC_ReadAxisError.html. Accessing the internal variable will result in outdated values if the acis error is not mapped by PDO and is not recommended in general.) uiDriveInterfaceError holds errors of the SoftMotion driver for the drive. It is also an internal variable, not intended for direct access. It is intended for logging, the PLC log will contain the drive interface error, consisting of this number and an error text. My recommendation for handling axis errors in the CODESYS application: 1) Use MC_ReadStatus on the axis to find out whether it is in state Errorstop 2) If in Errorstop, there are two possibilities: an error reported by the drive (MC_ReadAxisError) or an error of the SoftMotion function blocks (output MC_ReadStatus.FBErrorOccured). 3) If there is no drive error, you can use SMC_ReadFBError https://content.helpme-codesys.com/en/libs/SM3_Basic/Current/SM3_Basic/POUs/Diagnostics/FBError/SMC_ReadFBError.html Best regards, Georg
Last updated: 2025-09-24

Post by robbudge on Update Raspberry Pi error ^{CODESYS Forge talk (Post)}
Same problem, SP19.4 is a disaster
Last updated: 2023-12-08

Post by macros8 on Error, visualisation property handling, VISU_USEPROPERTYINFO ^{CODESYS Forge talk (Post)}
you all saved my life now ;)
Last updated: 2023-12-09

Post by eschwellinger on ERROR no connection With RPI ^{CODESYS Forge talk (Post)}
package directory does not match...
Last updated: 2024-01-11

Post by eschwellinger on Html5 controls error ^{CODESYS Forge talk (Post)}
which plc in which version are you using?
Last updated: 2024-01-29

Post by anttimurtsi on Html5 controls error ^{CODESYS Forge talk (Post)}
Still got this problem havent found a fix
Last updated: 2024-02-05

Post by anttimurtsi on Html5 controls error ^{CODESYS Forge talk (Post)}
We have tried that but apparently the issue still persists
Last updated: 2024-02-07

Post by durstloescher on Codesys Input Detector ^{CODESYS Forge talk (Post)}
Perfect, works after a bit Try & Error, Thank you!
Last updated: 2024-02-16

Post by eschwellinger on Errors by Code Generate ^{CODESYS Forge talk (Post)}
yes no error in my case.
Last updated: 2024-02-17

Post by reinier-geers on missing font ^{CODESYS Forge talk (Post)}
Hi I mis the font. Wenn i click i get an error
Last updated: 2024-02-26

Post by codesysjupiter on Could not be resolved - Library error ^{CODESYS Forge talk (Post)}
I tried. but not work.
Last updated: 2024-04-13

Post by benitohb on Error in simple division ^{CODESYS Forge talk (Post)}
Hello. thanks for your help! you saved my life.
Last updated: 2024-04-25

Post by wollvieh on CAA File- FILE_OPERATION_DENIED error ^{CODESYS Forge talk (Post)}
https://forge.codesys.com/forge/talk/Runtime/thread/a113f7c93b/#5938
Last updated: 2024-05-16

Post by micik on CAA File- FILE_OPERATION_DENIED error ^{CODESYS Forge talk (Post)}
double post - created by mistake
Last updated: 2024-05-16

Post by mg0815 on ERROR: Calling the program "AlarmStorage_Prg" is not allowed from multiple tasks ^{CODESYS Forge talk (Post)}
...
Last updated: 2025-11-04

Post by eschwellinger on symbol config - IecVarAccRegisterInstance - error ^{CODESYS Forge talk (Post)}
which plc in which version do you use?
Last updated: 2025-12-14

Post by eschwellinger on symbol config - IecVarAccRegisterInstance - error ^{CODESYS Forge talk (Post)}
which plc in which version do you use?
Last updated: 2025-12-14

Post by sepp on symbol config - IecVarAccRegisterInstance - error ^{CODESYS Forge talk (Post)}
Hallo, habe das selbe Problem . Hast du eine Lösung gefunden?
Last updated: 2025-12-14

Post by aniket-b on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
@eschwellinger any suggestions here?
Last updated: 2026-01-06

Post by mjam04 on AM243 LaunchPad as PROFINET Device with CODESYS – RPC Aborted error when scanning devices ^{CODESYS Forge talk (Post)}
Attachment
Last updated: 2026-03-13

Post by tomstix on JSON_Utilities_SL JSONFileWriter error NULL_POINTER ^{CODESYS Forge talk (Post)}
Hi, did you ever find an answer to this?
Last updated: 2026-04-09

Post by transcend on Movesuperimposed Command Aborted Error ^{CODESYS Forge talk (Post)}
Hello everyone, I am building a 3-axis packaging machine. First, I created a virtual axis and connected the knife to the virtual axis using a CAM. I also linked the conveyor system to the virtual axis with GearIn. However, I’m facing the following issue: when I use SUPERIMPOSED to change the conveyor’s motion, I get a COMMAND ABORTED error. The exact error is: SMC_ERROR.SMC_FB_WASNT_CALLED_DURING_MOTION. Why am I getting this error?
Last updated: 2026-04-11

Post by andrebrandt on how to extract the name of an FB to a variable ^{CODESYS Forge talk (Post)}
Hi mr. Do you have the script? Cause the link is down.
Last updated: 2024-09-27

Post by andrebrandt on how to extract the name of an FB to a variable ^{CODESYS Forge talk (Post)}
Hi mr. Do you have the script? Cause the link is down.
Last updated: 2024-09-27

Sort by relevance or date