Post by davidbo on Two licenses have to be installed forgot to enable one license ^{CODESYS Forge talk (Post)}
I have to install "Basic M" and "Visualization M", but it seems that during installation of "Basic M" you have to enable "Visualization S" I assume if you here after want to install my "Visualization M". And I forgot to enable "Visualization S" How do I fix that?
Last updated: 2026-02-02

Post by pernockham on Unable to deploy "Control for Linux SL 4.18.0.0" ^{CODESYS Forge talk (Post)}
Ok, I think I understand. The problem is my language-setting being "swedish". I will check if I can switch to english. Update/confirmed. Change LANG to en_GB, this enabled the architechture to be correct and the control SL again to appear and to be possible to be updated. Thanks!
Last updated: 2026-02-23

Post by sven01 on Documentation / Usage Help For Scripting Engine Libraries ^{CODESYS Forge talk (Post)}
Hi, I am still not able to figure out how to use the the classes and their functions. 😔 Let's say I would like to use the function "importfile()" from the class "ScriptTextListObject.ScriptTextListMarker". I would be grateful for an additional example. Thanks! 😊
Last updated: 2023-08-21

Post by ulvis on How to do horizontal scroll in CFC editor? ^{CODESYS Forge talk (Post)}
CFC (page oriented) editor does vertical scroll by mousewheel and zoom by ctrl + mousewheel, allright. How do I do the horizontal scroll (pan) using the mousewheel? (I do not want to drag the scrollbar, I am sure you have guessed by now.)
Last updated: 2023-09-06

Post by kumareasu on Code Size ^{CODESYS Forge talk (Post)}
Hello, How to find the following for for my application when I want to switch over to "Application Based Licence"... Code Size. IO size When I use Analog IO. IO size when I use AC inverter(Drive for AC induction motor). For example we read/write few EtherCAT registers.
Last updated: 2023-09-07

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
I believe the reason that I eventually lose my ability connect is because of exceeding the time limit for demo mode. Still unsure why I cannot update the edge gateway though.
Last updated: 2023-09-13

Post by ofey on Codesys Soft PLC OPC UA server ^{CODESYS Forge talk (Post)}
Hi! I'm sorry if this has been asked before. I have tried looking up previous topics regaring this, but even though I'm following tutorials and other posts I cant seem to get this to work consistently. I actually got the connection established on a test project after some trial and error. I only got it to work with the "Anonymous login". But after i deleted the test project and tried to get the same thing to work on another project I cant get it to work anymore. What I'm trying to do: Set up and OPC UA Server using CODESYS with the free soft PLC. I then try to connect to the OPC UA Server with the program "UaExpert". What happens: I get the error Error "'BadUserAccessDenied' was returned during ActivateSession". What I have done in CODESYS: - Added the object "Symbol configuration" and checked some test variables - Checked "Support OPC UA features - In "Communication settings -> device -> Change runtime security policy" I have checked "Allow anonymous login" What I have done in UAExpert: - Found the OPC UA server under "local". (It is showing two servers though, I do not know why. It showed the same when it worked yesterday). Se attachment - Checked "Anonymous" under "Authentication settings in the OPC UA server. I'm new to CODESYS, so it could be something elementary wrong in my settings. Maybe something in the user settings in CODESYS regarding user rights or something?
Last updated: 2023-09-14

Post by bnewman on Delete PLC Log ^{CODESYS Forge talk (Post)}
I also would like to now how to clear the PLC Device Log. @eschwellinger are you saying there is no way to clear the log? When I am debugging I want to clear the log, it would make things some much easier to find.
Last updated: 2023-10-17

Post by anhkdv on Motion FB Error ^{CODESYS Forge talk (Post)}
When I load the SMC_GroupWait command twice in a row into the buffer an error occurs when I try to MC_MoveLinearRelative in the dynamic coordinate system. If I use MC_MoveLinearAbsolute in the dynamic coordinate system, it still works
Last updated: 2023-10-23

Post by davidbo on How to switch between dynamic IP address and dynamic? ^{CODESYS Forge talk (Post)}
Well. One can do that, I have found a python script which can modify /etc/dhcpcd.conf and I suppose there is a way I can execute it from CODESYS and it seems to be the only way
Last updated: 2023-11-08

Post by naks on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hi everyone, I was able to change the IP address of my Controller (wago 750-8212), but when i restart my Controller then the IP address resets to the original, are there any other settings i need to implement?
Last updated: 2024-07-08

Post by climblinne on Calling OPC UA Methods from UaExpert ^{CODESYS Forge talk (Post)}
So I found the mistakes. First I forget to deactivate "Use access rights defined in the user management". And also I used in "UaModeler" a project name with whitespaces, which lead to a wrong namespace name.
Last updated: 2024-07-11

Post by j-page on I have errors while building the project ^{CODESYS Forge talk (Post)}
I am also suffering from the same problem. The "Clear All" in the build clears the error once, but when I open the project again, the same error occurs again. Can someone please help me?
Last updated: 2024-07-11

Post by mmpl on Array to String ^{CODESYS Forge talk (Post)}
Hi Thank you for you reply. Yes I can concatenat longer string. I am using string_Util_Intern libraray for concat. The issue is abot plc performance. It takes 7 second. I am looking to improve time.
Last updated: 2024-07-23

Post by squale on URL jumps between different visualizations behind a reverse proxy ^{CODESYS Forge talk (Post)}
Hi kevinrn, I have the same question as yours. On my side I try to make nginx work but it doesn't goes well. I think the sub_filter doesn't work int this case.
Last updated: 2024-07-26

Post by richard-wang on Runtime not working on raspberry pi Bullseye ^{CODESYS Forge talk (Post)}
Hello Valenting I am facing the exact same problem , I am wondering how do you handle this, I would be much appreciated if you can share what you have found. Thx
Last updated: 2024-07-29

Post by richard-wang on Raspberry Pi 4 B HW 1.5 Codesys control 4.10.0 stopps after a few seconds ^{CODESYS Forge talk (Post)}
Hi Preimesbergert I have the same problem and same result as yours, I am wondering if you find any root cause? I would be much appreciated if you can share any finding.
Last updated: 2024-07-29

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
If I select "Update boot aplication" while I download the code the persistent variables got a constant startup value. But during the running I am still not able make the persistent variables to hold they actual value.
Last updated: 2024-09-01

Post by thomas-moba on TrueType font problem ^{CODESYS Forge talk (Post)}
Hello, I have the problem that CoDeSys 3.5.19.1 displays a message that this font is not a TrueType font when I select our company font. But it is a TrueType font. How can I fix this error? Thanks!
Last updated: 2024-09-12

Post by karel-bas on Loosing connection to emulation running on Linux ^{CODESYS Forge talk (Post)}
Ok. I ran the vm twice until it failed and from log it seems like my OPC UA fails becouse I am not able to get HTTPs certificate ? I dont really see any other reason.
Last updated: 2024-09-20

Post by fmbrew-rob on Licensing info not available. ^{CODESYS Forge talk (Post)}
Was there ever any resolution to this? I am using Virtual Control SL on a ProxMox setup, and I can't get the license installed. I get the same errors reported above.
Last updated: 2024-09-21

Post by banialuk on Modbus TCP Server ^{CODESYS Forge talk (Post)}
I created Modbus Server TCP, but when I try started i have a error "TCP socet error" "Error on open/close/read/write TCP socket."
Last updated: 2024-10-21

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Maybe I don't know. **Maybe if someone know it can help me. ** I will try Constrol SL runtime in the Host. I will try to but only Nic without IP
Last updated: 2024-10-23

Post by talhaali on Control Win one instance at a time ^{CODESYS Forge talk (Post)}
I want to open one instance of runtime to be opened at a time even I hit multiple times? How can I implement it?
Last updated: 2024-10-25

Post by talhaali on Control Win one instance at a time ^{CODESYS Forge talk (Post)}
I want to open one instance of runtime to be opened at a time even I hit multiple times? How can I implement it?
Last updated: 2024-10-25

Sort by relevance or date