Post by rikher on Error: Too few outputs exixts for the box 'MemCopy' (minimum is 1). ^{CODESYS Forge talk (Post)}
I am using MemCopy Function for this example: https://www.youtube.com/watch?v=DeTCT5Vyn28&t=482s It is from library WagoSysPlainMem. I want to use this for an MQTT example. However, Codesys is complaining the block does not have outputs. How to fix this?
Last updated: 2024-06-19

Post by jeffersonhui on SysProcessExecuteCommand2 terminate ^{CODESYS Forge talk (Post)}
Hi, I am using the SysProcessExecuteCommand2 function from the SysProcess library to run the candump command in the PLC's Linux environment. However, the candump command stays running indefinitely. If I was running the candump command from a terminal (via PuTTy, etc), that command usually requires Ctrl+C to terminate. Is there a way to terminate a command that is executed with SysProcessExecuteCommand2?
Last updated: 2024-06-24

Post by otbeka on CmpCrypto CryptoGenerateHash Not Outputting ^{CODESYS Forge talk (Post)}
Hi, I have been trying to use CryptoGenerateHash from the CmpCrypto Implementation library. My code is taken almost directly from the CryptoDemo.project example provided on Codesys Forge, yet the CryptoGenerateHash function does not write to the address listed in pHash. RTS_IEC_RESULT is OK, but I am getting nothing out of the function. No errors either, all my libraries are up to date. Any help would be appreicated! PROGRAM PLC_PRG VAR sMessage : MESSAGE := 'The red fox runs across the ice'; abyHashCode : HASH_CODE := [ 16#52, 16#ED, 16#87, 16#9E, 16#70, 16#F7, 16#1D, 16#92, 16#6E, 16#B6, 16#95, 16#70, 16#08, 16#E0, 16#3C, 16#E4, 16#CA, 16#69, 16#45, 16#D3 ]; xMessageOK : BOOL; END_VAR xMessageOK := CheckMessage(sMessage, abyHashCode); FUNCTION CheckMessage : BOOL VAR_INPUT sMessage : REFERENCE TO MESSAGE; abyHashCode : REFERENCE TO HASH_CODE; END_VAR VAR _hHASH : RTS_IEC_HANDLE := CryptoGetAlgorithmById(ui32CryptoID:=RtsCryptoID.HASH_SHA1, pResult:=0); Result : RTS_IEC_RESULT; bsMessage : RtsByteString := (ui32MaxLen:=SIZEOF(sMessage), pByData:=ADR(sMessage), ui32Len:=TO_UDINT(LEN(sMessage))); abyNewHashCode : HASH_CODE; bsNewHashCode : RtsByteString := (ui32MaxLen:=SIZEOF(abyNewHashCode), pByData:=ADR(abyNewHashCode)); diCmpResult : DINT; END_VAR Result := CryptoGenerateHash(hAlgo:=_hHASH, pData:=ADR(bsMessage), pHash:=ADR(bsNewHashCode)); diCmpResult := SysMemCmp(pBuffer1:=ADR(abyHashCode), pBuffer2:=ADR(abyNewHashCode), udiCount:=SIZEOF(HASH_CODE)); CheckMessage := diCmpResult = 0;
Last updated: 2024-09-06

Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
Hi gseidel, before moving to HW implementation, I had created the same program in simulation mode with virtual drives and, as far as I remember, everything worked fine simulating process and the few useful inputs. So it does not seem to be a SoftMotion library problem, but rather a problem with dynamics or physical axis adjustments. What escapes me, however, is the fact that this function is supposed to perform a position shift virtually, in fact without interfering with the axis itself, thus independent of its adjustments. MC_SetPosition() is not a homing function, in fact it is clearly intended to be executed on the fly with the axis moving. Now I'll see if I can reduce the program, although I don't like it very much. In my life I have learned that problem searches should be done on the part, and not in a more or less similar way.
Last updated: 2025-01-10

Post by r-c-r on SM3RaspiStepper 0.0.0.6 issue ^{CODESYS Forge talk (Post)}
Ok, so i made some tests in the meantime and i have some conclusions. It apears that the enable bit is activated only when a motion function is executed. I implemented a very simple program with MC_Power and MC_Jog. If i enable everything on MC_Power, the enable GPIO pin stays off. However, as soon as the MC_Jog function is used the enable GPIO pin turns ON and remains ON. In version 0.0.0.4 this is not happening. The GPIO enable pin turns on or off when the MC_Power is enabled or disabled. From this behaviour i understand that in version 0.0.0.6 the GPIO enable bit is activated together with pulse and dir pins when motion starts. When motion stops, enable bit remains with the last state (on in this case) and you cannot turn it off for example. For me this bit is useful because i can turn on and off the stepper drive with MC_Power function. Now i can turn it on, but never off.
Last updated: 2025-04-04

Post by kurtk on Modbus TCP Server ^{CODESYS Forge talk (Post)}
ditto I'm just getting my codesys wheels on and the modbus stuff is confusing. I am re-platforming an existing PLC application On that platform one could simply tag variables to register numbers and the whole shooting match could be accessed via modbus and typically holding registers and input registers were treated the same way... On codesys I see there is a modbus TCP server Device I/O mapping tab and a Modbus TCP server IEC objects tab I get the sense that one can configure the serving of variables both/either way but am unclear about the optimum/necessary path. Apparently in the IEC Objects tab one can "ADD" something or other - presumeably channels. I have created a preliminary function block but the Select Function Block window shows nothing to select WTH ? I exported the Device mapping and was surprised to see the entire Device IO map - complete with all the bit-mapped holding/input registers!! WTH!!?? Bit-mapped words are strictly a nichey special purpose application. I am targetting making a couple hundred variables available which would turn into hundreds of pages of IO/mapping Is the FUnction Block IEC objects thingy an alternative to that ? I notice that CODESYS shows the tags which the PLC used to specify the register address... are tags used in CODESYS for any specific hard-core purpose ?
Last updated: 2025-08-19

Post by willbechel on Errors about PLC configuration in CoDeSYs software ^{CODESYS Forge talk (Post)}
I saved it as the same project but in a different location. I opened this "new project". I clicked on the "Direct Login from Automation Builder" button. It automatically directed me to CODESYS, where I was able to create the "Create Boot Project" but first I also clicked login again but inside CODESYS keeping the automation builder login online. Additional Information: The "Create Boot Project" function in CODESYS is used to create a project that will automatically start when the controller is booted up. To create a boot project, you must first create a new project in CODESYS. Once you have created a new project, you can then use the "Create Boot Project" function to create a boot application. The "Create Boot Project" function will create a new application that is based on the current project. The new application will be saved in the same location as the current project. You can then download the new application to the controller.
Last updated: 2024-02-01

Post by willbechel on Project Login Problem ^{CODESYS Forge talk (Post)}
I saved it as the same project but in a different location. I opened this "new project". I clicked on the "Direct Login from Automation Builder" button. It automatically directed me to CODESYS, where I was able to create the "Create Boot Project" but first I also clicked login again but inside CODESYS keeping the automation builder login online. Additional Information: The "Create Boot Project" function in CODESYS is used to create a project that will automatically start when the controller is booted up. To create a boot project, you must first create a new project in CODESYS. Once you have created a new project, you can then use the "Create Boot Project" function to create a boot application. The "Create Boot Project" function will create a new application that is based on the current project. The new application will be saved in the same location as the current project. You can then download the new application to the controller.
Last updated: 2024-02-01

Post by konstantin on Lenze i950 Servo and WAGO PFC200 ^{CODESYS Forge talk (Post)}
Hello, In our workshop we have a Lenze i950 servo drive that has an EtherCAT bus and CiA402 compatibility. The WAGO is PFC200 750-8212 and as per documentation it has built-in license for SoftMotion Light functionality. It is not capable of supporting the full SoftMotion functionality like gearing and synchronizing. I added the EtherCAT esi files from Lenze and the EtherCAT master does see the drive, then I added a SoftMotion Light Axis object. The problem is that I can only energize the axis, I cannot execute any other commands. I set the positive and negative torque limits from the PDOs to 200% and when I try to move the axis by force it does not move back to its original position. I use the SML function blocks from the PLCOpen library and the error from the function blocks is that the op mode cannot be changed. Then I tried using a standard SoftMotion axis object and everything works fine, except the MC_Home function block. The axis moves back to its position when forced out of it. I follow this guide from Lenze - Lenze i950 CODESYS V3 What could cause this issue with the SoftMotion Light axis object? Best Regards Konstantin Kolev
Last updated: 2026-02-11

Post by john-robinson on Limiting Memory Access of an Array to Within its Bounds ^{CODESYS Forge talk (Post)}
Recently we had an issue regarding some simple code to calculate a rolling average. The code indexes from zero to 199 to properly store the current input into a circular buffer which then allows us to calculate a rolling average: VAR input_5s : REAL; outs_arr : ARRAY[0..199] OF REAL; i : USINT := 0; END_VAR ___ //this code runs every five seconds, calculating a rolling average outs_arr[i] := input_5s; i := i + 1; output := OSCAT_BASIC.ARRAY_AVG(ADR(outs_arr), SIZEOF(outs_arr)); IF i >= SIZEOF(outs_arr) THEN i := 0; END_IF There is a simple bug in this code where the index will be set to 0 when it has surpassed the length of the array in bytes (800 in this case) rather than larger than the number of reals in the array (200). The solution here is simple, replacing i >= SIZEOF(outs_arr) with i >= SIZEOF(outs_arr)/SIZEOF(outs_arr[0]). In this example when the index increased to 201 and the line outs_arr[201] := input_5s was called, codesys arbitrarily wrote to the address in memory that is where outs_arr[201] would be if the array was that long. I would like to find a way to wrap the codesys array inside of a wrapper class that checks if an input is within the bounds of an array before writing to that value. I know how I would implement that for a specific array, I could create a method or class that takes an input of an array of variable length, ie. ARRAY[*] OF REAL, but I don't know how to make this for any data type. I am wondering if anyone has ever done anything similar to this, or has any better suggestions to ensure that none of the programmers on this application accidentally create code that can arbitrarily write to other locations in memory.
Last updated: 2024-03-05

Post by disha on Export data with the Trend API ^{CODESYS Forge talk (Post)}
Can you please share the code as i am the beginner for codesys. I don't have any idea that how sqlite is integrated with the codesys.
Last updated: 2024-07-08

Post by reinier-geers on Syssockping hang up V3.5.9.2 ^{CODESYS Forge talk (Post)}
For data logging on a server i check the connection with Syssockping. When i do that it seems to hang uo the system once a while for 13 seconds. Why ??
Last updated: 2024-09-02

Post by damian177 on Problem with downloading OPC UA tags by Data Source Manager ^{CODESYS Forge talk (Post)}
In my OPC UA Server is about 12 thousands tags. Can by possible that downloading tags from OPC UA Server lasts a long time , and when expires about 2 hours (demo license time) that downloading freezes ?
Last updated: 2024-09-04

Post by dengsberg on Check Connection Status of the OPC-UA Server for Data Source Manager with OPC-UA Client ^{CODESYS Forge talk (Post)}
Another question is how to test the quality of the individual variable?
Last updated: 2024-09-07

Post by jobtc on Count alarms within a Class or Group ^{CODESYS Forge talk (Post)}
Is it possible within codesys 3.5 SP16 Patch 5, to get some data from the alarm manager? For example: i want to know how many alarms i have within a class Thx for the help
Last updated: 2024-09-13

Post by dekr on Visu User Management Dialog - Add user does not work ^{CODESYS Forge talk (Post)}
After the user data has been entered, the page symbol at the top left must be pressed before OK is pressed.
Last updated: 2024-10-18

Post by eschwellinger on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
..strange just switching of this device without graceful Linux OS shutdown? Reset orgin on the device tree and a new download of the application will bring it up and running again but sure then the persistent data are for sure lost.
Last updated: 2024-11-02

Post by reinier-geers on Monitor a Can J1939 ^{CODESYS Forge talk (Post)}
Hi , Can i monitor a other Canbus and use the data ? Ive got a mobile crane. So i want to add a device with an unused adres. Then Read the Joystick and use some buttons for an optional device
Last updated: 2025-01-15

Post by domebruce on Which database to use? ^{CODESYS Forge talk (Post)}
I'm new on Codesys. I need to manage a large and complex data set, which database and library you suggest to use? Some application examples will be appriciated. Thanks
Last updated: 2025-03-04

Post by respl on Codesys Symbolic Access ^{CODESYS Forge talk (Post)}
We need to exchange data between two controller IFM and EXOR. Our one controller support codesys symbolic access while other support COdesys V3 application. can anybody tell me how to do communication between these two. Sample program will be highly appreciable. Regards, Rahul Sayre
Last updated: 2025-03-20

Post by kuegerls on Programmatically clearing or syncing Data Source Manager cache? ^{CODESYS Forge talk (Post)}
Hi everyone, is there a way to programmatically clear the cache of the Data Source Manager in CODESYS so that variable values are re-synchronized from the OPC UA server (Symbol Configuration with OPCUA features)? Alternatively, is it possible to trigger a manual synchronization of data source variables from within the application code at runtime? Here’s the situation: A variable is first written by the OPC UA client to the server in one state of a state machine and changes to another state – so the initial communication works. Later, the server changes the variable value, but the client does not receive or reflect the updated value, unless the variable is actively written again. I’m looking for a way to force the client (data source manager) to re-read or refresh the variable state from the server, possibly by clearing the internal cache or triggering a sync. Any ideas or suggestions would be greatly appreciated! Thanks!
Last updated: 2025-05-23

Post by blitz on SMC_CNC_INTERNAL_ERROR - SMC_ReadNCFromStream ^{CODESYS Forge talk (Post)}
Hi. Has anyone managed to implement the MDI (Manual Data Input) functionality in CODESYS CNC? I'm using SMC_StringStream2 and SMC_ReadNCFromStream, but I'm getting the error: SMC_CNC_INTERNAL_ERROR. I'd really appreciate any suggestions beyond what's already available online.
Last updated: 2025-07-09

Post by kumareasu on Cursor to move to a control ^{CODESYS Forge talk (Post)}
How to move cursor to a particular control in HMI through PLC program to enter data from keyboard without using tocuhscreen or mouse
Last updated: 2025-08-08

Post by pernockham on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
Ok, think I understand. The reason for the error is I try to include complex variables (FB) in the persistenced data. I will try to use {attribute 'ac_persist_exclude'} to exclude those elements.
Last updated: 2025-08-22

Post by pernockham on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
Confirmed. Variable types that should be excluded: BIT Pointer Interfaces Constants Arrays of non-persistent data types Docs: https://content.helpme-codesys.com/en/CODESYS%20Application%20Composer/ac_pm_definition_persistent_variables.html
Last updated: 2025-08-24

Sort by relevance or date