Post by balazska2 on Position values with integer variables ^{CODESYS Forge talk (Post)}
Hello guys! https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_label.html My question: Could I give an integer variable to the Position records (in the Element list => Position => width / height)? If yes, how? I defined a TEST integer variable with 300 value. I tried to add this variable to the width record (.TEST or only TEST), but if I saved, the value jumps back to 0. Thanks for your help! :)
Last updated: 2024-10-03

Post by ballen on I have errors while building the project ^{CODESYS Forge talk (Post)}
Any luck at solving this issue?
Last updated: 2024-10-14

Post by sharvan on Visu User Management Dialog - Add user does not work ^{CODESYS Forge talk (Post)}
I am also getting same issue.
Last updated: 2024-10-17

Post by mtnkyr on Ethercat Master ^{CODESYS Forge talk (Post)}
Hi everyone, I am working on a 3 axes Cartesian robot. I take control of all the axes. In the Ethercat connection, the drive sequence is the same as in the program. For example, in the current program the order is as follows. 1. Axis_Z 2. Axis_X 3. Axis_Y Communication Diagram PLC->Drive_Z->Drive_X->Drive_Y When I try to change the order in the program while keeping the communication diagram the same, there is an axis drive mismatch. How can I fix this?
Last updated: 2024-10-22

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
For small project, I would like to use my industrial computer as a PLC + Industrial Computer. Like that I can save the cost of one PLC. That why I am using Codesys on Linux. With the nic it is not working. I already set the IP adress with /etc/network/interfaces. Can it comes from there ? looking to "Control Linux SL" docuemntation it should work with rtu.
Last updated: 2024-10-23

Post by vincentger on using ADS1115 ^{CODESYS Forge talk (Post)}
Any reason the ADS1115 wouldnt work with SP20.1 and Runtime 10.0.0.0 on the Raspberry Pi . Using Bullseye or Buster i run into the same issue: Libary and integration works in general as described above BUT i am seeing "bleeding" between the analog inputs . Specifically consecutive ones: So sometimes the raw from AI1 shows on AI2, AI2 on AI3, .. AI4 on AI1. Even with filtering i cant smoothen that out properly and i feel like something is wrong. Almost like the bus is stumbling over itself, or the request from Codesys to the device.
Last updated: 2024-10-28

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I included a project archive in the attachments
Last updated: 2024-11-09

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I succeed to change the device to PI_SL but still the same problem of the I2C device switching between running and not running. the only difference with your project is that yo use I2C_master device version 4.7.0 and i 4.7.13, for GPIO i also use the 4.7.13 version and you the 4.7.0. Can you send me the older version of the Raspberry PI pheripals library, because i cannot choose lower version then 4.7.10 for the GPIO and I2C_master device
Last updated: 2024-11-11

Post by s1ack on PFC200 Will soft-container & IIoT license survive a firmware update? ^{CODESYS Forge talk (Post)}
I have an IIoT License activated on a PFC200 with older firmware 2.08.32 (11). If I flash it to the latest available 4.05.10 (27) does the license get destroyed? I have a back up file '3SLicenseInfo.tar'. But this looks quite a bit different form the backup I got from more modern firmware... 'CMLicenseNew.WibuCmRaU'. Can the new license manager restore it from the old .tar?
Last updated: 2024-11-12

Post by masterofplc on Unrecoverable SoftMotion state after switch to PreOp ^{CODESYS Forge talk (Post)}
Hi. i have the same problem. Thank you
Last updated: 2024-11-15

Post by garrian on How to write multiple coils (Modbus FC15) ^{CODESYS Forge talk (Post)}
Thanks! As far as I can see, the client can only send words. And on the server side there are an array for each of the functions: bool for coil and discrete, word for holding and input registers. I assume I can use holding register, then use bit mapping on the words instead of coils. But I really want to use the FC15/coils.
Last updated: 2024-11-17

Post by struccc on Application failing to boot after system reboot ^{CODESYS Forge talk (Post)}
I started to experience the same issue, after upgrading to 3.5.19 , and still persists with 3.5.20.3 , using CodesysControlWinV3 x64 on Windows. Unfortunately, this is a live application, normally it is running for months without interruption - so it was a surprise at the last cold start... It was not possible to go online with the original version, so I couldn't see the application, or system status, just the log message. First time I manually clean the Application from the PlcLogic directory (there was no coredump file in there), then I could start the runtime service, and do a fresh download, and set the bootproject. I could not try a cold system reboot - it's in a 24/7 production environment, and I was under heavy pressure to start... What I did, I have created a backup from the * complete * runtime directory, from the failed, and fixed version - before and after download. This directory in my case C:\ProgramData\CODESYS\CODESYSControlWinV3x64\55096128 - At the next shutdown, it was sufficient to copy back this backup completely, and could start the runtime service afterwards. Ugly, but local staff with some skills can do it without programming tool... I don't store any live data, configuration, log files, persistent data in this directory - the only reason I need this is to edit the CodesysControl... .cfg file.... And to see the logfiles in emergencies like this. The application concerned doesn't use any retain area. - exactly for these reasons - Maybe that is causing the problem with the newer runtime versions As far as I see, this problem occurs only if the power of the Windows PLC is interrupted without a proper shutdown. Unfortunately, this can happen sometimes. The newer versions, seems tp modify CodesysControl.cfg on the fly, and register the applications, and bootproject information after download. (I don't really see CodesysControl.cfg a proper location for this... but that's just my feeling) So now I had a look at CodesysCotrol.cfg on my laptop and I found: [CmpRetain] ;Retain.SRAM.Size=0x200200 ;Retain.SRAM.Address=0xFA3C5776 ;SimulateSRAM=1 [CmpApp] ;Bootproject.CreateOnDownload=0 ;Bootproject.StoreOnlyOnDownload=0 ;Bootproject.InvalidateByRename=1 ;Bootproject.InvalidateBySetting=1 ;Bootproject.InvalidateNever=0 ;PersistentForce=0 ;RetainType.Applications=InSRAM ;RetainType.Applications=OnPowerfail ;RetainType.Applications=None ;Exception.Hardware.GlobalStop=1 Application.1=MyTestAppNoRetain The last line appeared after download and boot project creation. Maybe... Should set RetainType.Applications=None? I wonder about all these settings, but... Will write separately about it. I hope this helps a little...
Last updated: 2024-11-21

Post by paterad on Edge gateway ^{CODESYS Forge talk (Post)}
Hello, I am struggling with Edge gateway to the automation server. It is not possible to establish the link. When I create the Edge in codesys and get it to Automation server, it is red, unable to connect. Scan fails. RPi 4B Runtime 4.13.0.0 Edge gateway 4.13.0.0 Codesys 3.5.2.40 Any idea what to chase? I have been using previous versions of edge gateway. Now I updated all to latest versions, failed. Frustrating.
Last updated: 2024-12-03

Post by reinier-geers on HTTP Client Connection ^{CODESYS Forge talk (Post)}
Hi, how can i get that library?
Last updated: 2024-12-04

Post by reinier-geers on HTTP CLIENT (MAX SIZE) ^{CODESYS Forge talk (Post)}
Hi Where can i get that library ?
Last updated: 2024-12-04

Post by amy123 on JSON Utilities ENUM to STRING ^{CODESYS Forge talk (Post)}
Hello, Is it possible to get the string returned from the ENUM JSONType? I read that with regular enumerations you can add '{attribute 'to_string'}' and access it. However, this is from the compiled library, so I can not add that attribute. When I try to use TO_STRING(JSONType) it returns the integer as a string. Ex. jsonType :=TO_STRING(pJSONData^._aJSONData[i].eType); gives '8' instead of NONE Thanks!
Last updated: 2024-12-09

Post by nz-dave on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
see attached I don't have watchdog enabled in tasks?
Last updated: 2024-12-27

Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
No errors in any condition. The function terminate correctly with the 'done' bit. Now I leave the machine and I don't know when I will be there again. The assumption you made I had considered. The operational limits of the axis are all fit for purpose, and this function should operate virtually without even noticing the motion limits. In fact in practice with the axis at low speed the function corrects any numerical value of the position in the range 0 ... 360° without any problem whatsoever in a single PLC scan cycle.
Last updated: 2025-01-10

Post by andrebrandt on BACnet dynamic create bacnet object ^{CODESYS Forge talk (Post)}
Hi. I want to create a FB with bacnet objects. FUNCTION_BLOCK PT1000 VAR_INPUT System: STRING; In: REAL; Name:STRING; END_VAR VAR_OUTPUT Out: REAL; Out_St: Struct_PT1000; END_VAR VAR {attribute 'instance-path'} {attribute 'noinit'} Tag: STRING; Instance:DINT; //AnalogInn : WagoSysBACnet.FbAnalogInput_large(1); This works. Objectname is AnalogInn. identifier is 1 END_VAR I want to name object based on FB PT1000. In FB P1000, I want to write eUnits, Name and so on. How can i do this???
Last updated: 2025-01-15

Post by askic on Disable/Enable Supervision ^{CODESYS Forge talk (Post)}
Hello, I have found the following instruction in the online help( https://content.helpme-codesys.com/en/libs/CmpSupervisor/3.5.17.0/SupervisorOperationSetTimeout.html ): Sets a (new) timeout for the given operation Supervision must be disabled to modify the timeout and should be enabled afterwards. However, I don't quite understand how to do this? Where can I disable and later enable Supervision? Is it through Codesys application or device menu? I don't find instructions clear.
Last updated: 2025-01-16

Post by winki on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Hello, I have the same Issue !!!
Last updated: 2025-01-27

Post by mubeta on Profibus DP master with EL6731 and automatic restart of slaves ^{CODESYS Forge talk (Post)}
WHEREAS, I have already searched various posts and forums, where mostly there are few references and mostly geared toward integration in TwinCAT. I am looking for how to properly configure the EL6731 board as a DP master, (where I have its 3S license), with CoDeSys 3.5.19.x. I have three types of slaves, all integrated with their GSD descriptors. In the tab for the various slaves, I don't see options related to node restart on 'station return'. On the card manual, I read that for each slave I should be able to configure parameter 8000:2C: “8000:2C Restart behavior after DP fault Reserve, must be 0 BIT1 RW 0x00 (0dec)” However, in the project I see no way to configure this parameter, in any of the boards; and the arrays do not always have such an extensive size; most of the time they are only two or three words in size. The problem is that, after the hot reset of CoDeSys, the master restarts by starting all slave nodes, but if one or more get lost and go offline, there is then no automatic restart upon their return. I would need to figure out any solution, even via software, how to figure out that this one is back available and restart it.
Last updated: 2025-02-02

Post by pernockham on Inheritence of struct, ^{CODESYS Forge talk (Post)}
Interesting, thanks! Didnt know about ANY before, and will sure find a use-case for it. Im not sure it will help me here though, it seems to me that an ANY will not accept a string assignment? I actually think that the "ALIAS" should work, that was a hard found error. I had a fair bit of scratching my head looking for misdirected pointers before I understood what was (not) happening. I will use the work-around of individual structs instead.
Last updated: 2025-03-08

Post by nz-dave on ethercat softmotion axis error ^{CODESYS Forge talk (Post)}
Hi all I'm having a little trouble get my axis to work. i can turn them off and on. i can run each servo manually inputting directly to the mapping address. as soon as i try to use any FB's like jog etc my servos wont move and error out. so far I've had error "SMC_ERROR.SMC_DI-POSITIONLAGERROR" and another one about not calling a fb. cheers. in the attachment I have just jogged X_Axis with the MC_JOG FB
Last updated: 2025-03-10

Post by kjernodhoker on library is not available ^{CODESYS Forge talk (Post)}
What can i do?
Last updated: 2025-03-24

Sort by relevance or date