Post by rafaelbrito on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I'm having the same problem after configuring array in Alarm Group (I configured only one item per line, since Alarm Group does not work with structures / arrays). Can someone help us?
Last updated: 2024-02-20

Post by rafaelbrito on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I'm having the same problem after configuring array in Alarm Group (I configured only one item per line, since Alarm Group does not work with structures / arrays). Can someone help us?
Last updated: 2024-02-20

Post by rafaelbrito on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I'm having the same problem after configuring array in Alarm Group (I configured only one item per line, since Alarm Group does not work with structures / arrays). Can someone help us?
Last updated: 2024-02-20

Post by rafaelbrito on Error while processing the visualization: Client id not present or no longer valid ^{CODESYS Forge talk (Post)}
I'm having the same problem after configuring array in Alarm Group (I configured only one item per line, since Alarm Group does not work with structures / arrays). Can someone help us?
Last updated: 2024-02-20

Post by damian177 on Raspbery Pi and Calendar ^{CODESYS Forge talk (Post)}
Hi, In my visualisation I have a "Calendar" control. I would like save day and month which will be clicket by operator on this control . forexample save in string array. How do this ?
Last updated: 2024-04-23

Post by eschwellinger on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
check with the CODESYS Installer er if you are on latest Visuversion. 4.9.1.0
Last updated: 2026-01-27

Post by mrkm-dic on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Hello, I would like to ask whether it is technically supported (and practically achievable) to combine CODESYS Master Redundancy with EtherCAT ring (loop) redundancy in the same system. System setup CODESYS version: CODESYS 3.5.21.40 CODESYS Control SL for Weidmuller u-OS-4.12.2.0 Controllers (Masters): Weidmuller UC20-M4000 ×2, configured as Active / Standby using CODESYS redundancy EtherCAT Slaves: Weidmuller UR20-FBC-EC ×3, supporting EtherCAT ring / line break detection Topology: EtherCAT ring (loop) Main question Is it officially supported to use: ・CODESYS PLC/Master redundancy (Active/Standby) and ・EtherCAT ring topology (for cable redundancy) at the same time? Expected behavior Our expectation is: ・When the Active PLC fails, the Standby PLC becomes Active ・The Standby PLC then takes over the role of EtherCAT Master ・EtherCAT communication is re-established ・I/O control continues after reinitialization (a short interruption is acceptable; no strict bumpless requirement) We do not expect completely seamless / zero-cycle switchover, but we want to understand: ・Whether this combination is supported by design ・Or whether there are known limitations or restrictions when EtherCAT ring mode is used together with Master redundancy Clarification At this stage, the question is mainly about feasibility and support, not about a specific error message yet. Any official guidance, limitations, or real-world experience would be greatly appreciated. Thank you in advance.
Last updated: 2026-02-05

Post by mubeta on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Thank you for your interest. Your answers are in line with what I knew, so at least it comforts me that I did not misinterpret the situation. However, I don't have an exact match as, for this project over the past few days I have: 1) I have gone back to leaving the various FBs of the motion always called, all of them, and in the state machine I use a boolean to activate the various useful Execute. (But in the future I want to go back and try the programming technique with which I wanted to develop this project); 2) For the occasional error: SMC_FB_WASNT_CALLED_DURING_MOTION perhaps it was due to the fact that I had set the Ethercat bus synchronism only at the CAN master level, but not at the level of individual drives. I have now also activated it for the individual drives and it does indeed seem to have been resolved, but having also adopted the programming technique mentioned in point 1), I cannot say whether this was the solution to the problem, or instead the previous point. Is there an error ‘regulator or start not set’ in the device log before the error ‘motion generating FB wasn't called for at least one cycle’? I can't answer that right now. By now the machine is running and I am no longer there, at this one. Also, I seem to remember that the 'fbeFBerror' drive structure (5-element array), does not cycle, BUT ONCE THE 5 EVENTS AFTER SWITCHING ON, IT DOES NOT UPDATE ANYMORE (but that's another issue), so diagnostics were not easy.
Last updated: 2024-07-24

Post by timvh on eCockpit - unable to start simulation ^{CODESYS Forge talk (Post)}
You need to start the application, see the "start" option at the top left (next to close simulation).
Last updated: 2023-08-31

Post by rshabsh on How to allow a user to handle certificates without access to sourcecode? ^{CODESYS Forge talk (Post)}
Did you find the solution?
Last updated: 2024-08-07

Post by trusty-squire on How to revert to previous version library ^{CODESYS Forge talk (Post)}
Turns out the issue was user error, no need to revert libraries.
Last updated: 2024-09-06

Post by trent on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi All, I use the analysis page in automation server to capture historical trends from my PLC - i only sample one point per hour but it does the job (for now) One issue I have is I often log on to analysis page to find the system has stopped recording trends from my PLC. To fix this, I need to choose "state information" in the "List view" under PLC and click "Reconnect" When I do this I see my variables listed under "parameters" under "PLC Details" start updating again and the trend in Data analyzer continues to update. My Question, Why do I need to manually reconnect? Is there a way to get automation server to automatically reconnect to the PLC so I continue to capture data from the PLC? Regards, Trent
Last updated: 2024-10-22

Post by ben1 on Trying to connect Codesys OPC server to Ignition ^{CODESYS Forge talk (Post)}
The server doesn’t allow anonymous users. You need to configure a username/password for the connection.
Last updated: 2025-01-21

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
Hi rmaas, Do you have any explenation how to send it to Hercules? Thank you!
Last updated: 2025-02-01

Post by dkugler on Cursor to move to a control ^{CODESYS Forge talk (Post)}
this example may be a hint, how to solve this: https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_visu_selection.html
Last updated: 2025-08-12

Post by matteodigani on Add library .dll to project codesys. ^{CODESYS Forge talk (Post)}
Hi, Is it possible to add a .dll library to a codesys project ? The .dll library is created with C++/CLI.
Last updated: 2025-10-14

Post by ranadheer on Add library .dll to project codesys. ^{CODESYS Forge talk (Post)}
As of my experience with Demo mode it is not possible to import the .dll file to the platform.
Last updated: 2025-10-15

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
Thanks a lot, it worked.
Last updated: 2023-12-14

Post by reinier-geers on Raspberry add to codesys ^{CODESYS Forge talk (Post)}
I bought a respberry license. Now i want to add it to my software. The manager starts. But there is an error.
Last updated: 2024-01-08

Post by h4sanb on Load (or Read) File from PLC ^{CODESYS Forge talk (Post)}
I want to download program from existing PLC and upload to new PLC. How to do it?
Last updated: 2024-01-09

Post by kumareasu on Password to POU ^{CODESYS Forge talk (Post)}
It appears to be there is no facility to protect an individual POU with password.
Last updated: 2024-04-27

Post by eschwellinger on New Ladder Diagram conversion does not work due to missing features ^{CODESYS Forge talk (Post)}
please send project archive and steps to repeat to - my question in the CODESYS store
Last updated: 2024-05-14

Post by benwzd on How to get SYM File on CodeSys 3.5 ^{CODESYS Forge talk (Post)}
Hello, I am looking to obtain the SYM file on CodeSys please? this is to import into PCVue Thanks
Last updated: 2026-01-27

Post by snhatton on Retain memory change to ZERO ^{CODESYS Forge talk (Post)}
I think more information is needed to help solve the issue. Can you list the exact steps to reproduce the issue? What version of Codesys are you using? Did you add a persistentVars object to your project? I would recommend browsing all instances of the retain variable to see all possible writes to the variable in question.
Last updated: 2023-09-18

Post by ltrinta on AWS IoT Core connection using AWS certificates ^{CODESYS Forge talk (Post)}
Hi there I want to know if there is possibility to connect a CODESYS application to AWS IoT Core using the certificates owneds by AWS. In the examples of CODESYS using AWS IoT Core library, we need to generate a local certificate and update it to AWS IoT Core. I want to use AWS IoT Core certificates. Regards, Leonardo
Last updated: 2023-09-28

Sort by relevance or date