Post by eschwellinger on Edge gateway ^{CODESYS Forge talk (Post)}
thank your for the feedback.
Last updated: 2024-12-05

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
if this does not work, you could install the 3.5.20.0 Gateway from the CODESYS Store. https://store.codesys.com/de/codesys-edge-gateway-for-windows.html then it is possible to enable it by righclick inthr task tray
Last updated: 2024-10-21

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by matthewkim on Codesys Gateway not running ^{CODESYS Forge talk (Post)}
In my case, I used a different version of gateway. ex)3.5.18.5 sysTray gateway start did not work, so I terminated it and made it work with 3.5.18.3 in "codesys installer" "Settings" and was able to connect to the PLC.
Last updated: 2025-06-12

Post by paro on Codesys ^{CODESYS Forge talk (Post)}
https://store.codesys.com/de/codesys-edge-gateway-for-windows.html
Last updated: 2024-01-14

Post by eschwellinger on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
We have tested this and it had worked at that time with China. which device is it? Anything special?
Last updated: 2025-09-23

Setting gateway and device ip by script not possible when executed from cli ^{CODESYS Forge talk (Thread)}
Setting gateway and device ip by script not possible when executed from cli
Last updated: 2022-04-07

Set up the gateway and device by IP address and device address ^{CODESYS Forge talk (Thread)}
Set up the gateway and device by IP address and device address
Last updated: 2022-05-04

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, I want to activate a license. But got an error. This gateway endpoint is inactive
Last updated: 2024-03-27

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, I want to activate a license. But got an error. This gateway endpoint is inactive
Last updated: 2024-03-27

Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected ^{CODESYS Forge talk (Thread)}
Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected
Last updated: 2024-05-20

Post by benmatchless on CODESYS Gateway is not running ^{CODESYS Forge talk (Post)}
same issue here, did you find anything?
Last updated: 2024-10-24

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
which CODESYS version? Dongle or Softcontainer?
Last updated: 2024-03-30

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
please write to 'my question' in the CODESYS store.
Last updated: 2024-04-16

Post by tqvist on Gateway Start ^{CODESYS Forge talk (Post)}
Hello, I am trying to connect to my PLC (IFM CR711S) via VPN(EWON COSY). I have been told to use Gateway SP14 or higher. I installed CODESYS 3.5 SP20 Patch4. In the Codesys Installer Software I can sleect "Set Gateway Service" and I do so for CODESYS 3.5 SP20 Patch4. I can start the Gateyay and select About and it shows: "CoDeSys Gateway V3 - x64 Version 3.5.20.40" (see attached) For compatibility reasons I have to run my PLC code in 3.5 SP11 and when I start I can first connect but then somehow the system restarts an older version of the Gateway only displaying: "CoDeSys Gateway V3" (see attached) I guess my question is how to run an old Cocesys Software with a new Gateway?
Last updated: 2024-11-26

Post by rajatdas2005 on Codesys Virtual control SL ^{CODESYS Forge talk (Post)}
Thanks once again. Right now the codesys virtual control sl docker is using the host ip itself not the docker ip. so the local host edge gateway was able to search the virtual plc. so you are telling me instead of local host edge gateway I should use the edge gateway docker version?
Last updated: 2025-08-08

Post by winki on Scan Network on gateway created with Control Sl ^{CODESYS Forge talk (Post)}
Thx it is working !
Last updated: 2024-10-23

Post by eschwellinger on ControlWin 3.5.20.30 Issues ^{CODESYS Forge talk (Post)}
no it is safe to use the older Gateway without any issue.
Last updated: 2024-11-25

Post by gabrielmorte on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, did you get it to work? I'm having the same problem.
Last updated: 2024-03-30

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
It doesnt see the dongel on my computer
Last updated: 2024-04-11

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Also funnie. Codeys is a Leading Hardware-"INDEPENDENT"
Last updated: 2024-05-01

Post by fasica on CODESYS Edge Gateway for Linux on embedded distribution ^{CODESYS Forge talk (Post)}
It's possible find or build a CODESYS Edge Gateway for Linux on embedded distribution like Yocto or other version? Thanks, Andrea
Last updated: 2024-04-16

Post by paterad on Edge gateway ^{CODESYS Forge talk (Post)}
Hello, I am struggling with Edge gateway to the automation server. It is not possible to establish the link. When I create the Edge in codesys and get it to Automation server, it is red, unable to connect. Scan fails. RPi 4B Runtime 4.13.0.0 Edge gateway 4.13.0.0 Codesys 3.5.2.40 Any idea what to chase? I have been using previous versions of edge gateway. Now I updated all to latest versions, failed. Frustrating.
Last updated: 2024-12-03

Post by eschwellinger on connect IDE to plc that uses modem ppp ^{CODESYS Forge talk (Post)}
Which plc type is it? Easy connection is to install a Gateway on remote side - this is available for Windows and Linux devices Then just add a new Gateway in CODESYS (with the IP Adress of the remote device) -> then scan the plc via this new added Gateway
Last updated: 2024-05-21

Sort by relevance or date