Post by atef on CODESYS V3.5 SP19.7 on windows server Installing error ^{CODESYS Forge talk (Post)}
Hi, while installing CODESYS V3.5 SP19.7 on windows server 2022 standard 21H2 I got error 2732 directory manager not initialized Has anyone faced this problem before or found a solution? Any guidance would be greatly appreciated. Thanks in advance!
Last updated: 2025-08-04

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
I have successfully activated a CODESYS Control Performance M on a Linux IPC. When I try to activate the CODESYS Visualization M license it fails with this error. Any ideas? This is a WAGO 752-9401 FW4, running Debian 12.
Last updated: 2025-08-21

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
This is what is on the device, is this correct? I did not see an option to install TargetVisu, is this needed?
Last updated: 2025-08-21

Post by timvh on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
In the device selection. Do not filter on Phoenix. Remove this filter and first add an Ethernet Adapter from CODESYS. To this Ethernet adapter add the Profinet Controller. After this you can filter on Phoenix devices in the "add device dialog".
Last updated: 2025-09-09

Post by lostcontrol on Bool turning on in case stament in wrong state? ^{CODESYS Forge talk (Post)}
i would be looking at what the case variable is doing then.. sounds like there might be a logic race going on
Last updated: 2023-12-16

Post by nadim4114 on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
Hi @andreal, Were you able to adapt a codesys runtime to your linux based device? I am planning on the same lines. we want to develop a small controller of 64IOs for our application. We want to adapt codesys runtime on our Arm processor based embedded linux boards.
Last updated: 2023-12-26

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
Hello, I am trying to save my settings as a recipe on the Raspberry. As target path I use /user/Documents Save: SaveRecipeAS, 'Recipes', 'Recipe' Load: ReadRecipe, 'Recipes', 'Recipe' However, no recipe is created. What could be the reason?
Last updated: 2023-12-28

Post by mavitia on Issue with TargetVisu on Codesys Control Win ^{CODESYS Forge talk (Post)}
anyone else running into the same issue: perform a repair install on the runtime, that should fix it without affecting license.
Last updated: 2024-02-02

Post by otdeveloper on IEC 61499 ^{CODESYS Forge talk (Post)}
Hello all, I cannot find anything connecting IEC-61499 to CODESYS. Considering the quality of the CODESYS IEC-61131-3 implementation and that IEC-61499 expands on it, literally including as integral part, why is there no mention of CODESYS and IEC-61499 anywhere on the internet?
Last updated: 2024-02-08

Post by reinier-geers on Compile error ^{CODESYS Forge talk (Post)}
Ive got a project version 16p3 Running on Epis( 32) . Codesys cant see License stick on Epis and no one can tell me why. So Got me a Crist(64). Change version to version 18.4 But then i get dialog libry problems. Anyone knows why ?
Last updated: 2024-02-22

Post by macros8 on Viewing PDF in WebBrowser Visual Element ^{CODESYS Forge talk (Post)}
No, you can´t. I have only tried different browsers on my PC and then on my HMI device. Unfortunately the device´s browsers did not support pdf file as I needed so I had to switch to *.txt.
Last updated: 2024-03-01

Post by root on Control for Linux SL on Ubuntu Core ^{CODESYS Forge talk (Post)}
..this is still not released therefore not available in the CODESYS Installer. This will come to 4.13.0.0 release but if needed preliminary might be possible on demand.
Last updated: 2024-03-04

Post by eschwellinger on "Distributed clocks are not synchronized, Rea time problem on hardware" ? ^{CODESYS Forge talk (Post)}
use a realtime capable target, not Control Win. Either a realtime patched Linux or Control RTE on Windows.
Last updated: 2024-03-04

Post by rstt on Codesys v3.5 on WAGO 750-8202 ^{CODESYS Forge talk (Post)}
Wago have documented that v3.5 is supported on their 821x controllers but not their 820x ones. Is it possible to import a device description and get it to run?
Last updated: 2024-03-07

Post by thewizard8 on Raspberry PI4 Serial Port ^{CODESYS Forge talk (Post)}
Hi thanks once again, Yes it supports because using python scripting I'm able to send data from the rasberry raspberry and receive it on my pc and vice versa (Image attached). But when using the CoDeSyS I just got red flags. Any light on this problem?
Last updated: 2024-03-19

Post by mosayeb on Power off ^{CODESYS Forge talk (Post)}
Hello. It is interesting that almost everyone has faced this problem. Run the program as shown in the attached photo. Give True to the Enable input and change the status of the drive to on and off with Servo-On
Last updated: 2024-04-08

Post by marcolim on Slow modbus digital input response ^{CODESYS Forge talk (Post)}
[Update]. My issue's solved, I applied the resistors in Pull-down configuration on each digital input. In thus configuration never happened "floating or delaying" acquisition on SoftPLC/Arduino Board.
Last updated: 2024-04-15

Post by dgdamt on Beaglebone Black OPC-UA Server ^{CODESYS Forge talk (Post)}
Hello, In my case all was ok on the BeagleBone side (OPC server) but wrong on the client side (was OK with UA Expert who manage properly its own certificates. I finnaly removed all security settings
Last updated: 2024-04-16

Post by fasica on CODESYS Edge Gateway for Linux on embedded distribution ^{CODESYS Forge talk (Post)}
It's possible find or build a CODESYS Edge Gateway for Linux on embedded distribution like Yocto or other version? Thanks, Andrea
Last updated: 2024-04-16

Post by cpoi on Safety EL6900 com Error ^{CODESYS Forge talk (Post)}
Hello, I using the EL6900 module with EL 1904 and EL2904 on Ethercat, and I have a ComErr on the EL6900. The FSoE Adresse : EL6900 = 1 EL1904 = 11 EL2904 = 15 Any suggestion? Thanks a lot in advance.
Last updated: 2024-04-26

Post by valenting on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
Update: it seems that the license is detected by CODESYS on my computer but not detected by the runtime on my device. I'm using Codesys control for raspberry pi in the latest version 4.11.0.0 Is there something to do to correct this ?
Last updated: 2024-04-29

Post by albertocamina on Login problem with FileTransfer on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
Thanks @eschwellinger! So my settings look like this on CODESYSControl_User.cfg: [CmpWebServerHandlerV3] AllowFileTransferServices=1 CallVisuServicesDirectly=0 Sadly, is still asking for user and password as soon webvisu is loaded... Any clue? Many thanks!
Last updated: 2024-06-03

Post by s1mon on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
yes sure. Thx for your support! This is the Codesys project stripped down only to my EtherCat and OneWire Configuration. The Project now contains only one OneWire Master on GPIO4.
Last updated: 2025-10-20

Post by aldo on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
Hello, this has been happening to me too since I updated to SP21 Patch 4. It seems the problem is on my main computer (Desktop) but not on the laptop. Has anyone found the cause? Thanks
Last updated: 2025-12-10

Post by gseidel on CODESYS SoftMotion Generic DSP402 on WAGO PFC200 + Festo CMMT-AS: MC_Power stays Busy, Controlword remains 0 ^{CODESYS Forge talk (Post)}
Hi gilad, I cannot tell for sure. But I think it should work on any PLC that is capable of doing motion control. Best regards, Georg
Last updated: 2026-07-01

Sort by relevance or date