Post by alexgooi on Codesys KNX implementation
CODESYS Forge
talk
(Post)
Dear forum, We are currently doing some research on the Codesys KNX implementation (https://store.codesys.com/en/codesys-knx-sl.html). We almost have it working but we are missing the last part. The setup: We have a Codesys virtual control container running on docker (4.17.0.0), the I/O is running over an Ethernet IP coupler (Weidmüller), and this is running fine. As far as I’m concerned this tells me that the ethernet device is working properly (the container has access to the outside world, including multicast). Underneath this ethernet adapter the KNX module is added (see picture). In the KNX device (Codesys) 2 input variables are added (see picture), and these are exported to ETS (ETS 5). In ETS A Codesys KNX device has been imported and the Codesys export was imported, afterwards the group addresses are attached to the variables (see picture). Afterwards this configuration is downloaded to the Codesys controller (Container) via ETS. ETS asks for the pressing of the programming button, when the virtual programming button is pressed the download starts and finishes without any errors. This tells me that ETS is communicating with the Codesys controller, and that the download process is ok (so far so good). Now the part where we are struggling with, somehow we need to convert the KNX TP to KNX IP. For this we have the following interface: Zenio KIPI SC (https://www.zennio.com/product/kipi-sc/) this is a KNX TP to IP interface. We have the following setup for this device (see picture) (an IP in the same subnet is used). We tried multiple combinations of IP addresses but the TP devices are simply not communicating to the Codesys container. Does anyone has any advice on what to try next. To make the question more explicit how can we link the TP bus to the Codesys device? Kind Regards Alex
Last updated: 2026-01-05
Post by full0pullpolen on Device User Logon
CODESYS Forge
talk
(Post)
The following guide describes how you can adapt the user management for the first time in a project. It deals with the definition of a user and a group to which he belongs. Requirement: the project for which the user management is to be set up is opened. There is no adapted user configuration yet. Select Project Settings ‣ Users and Groups and then the Users tab. The user Owner is already created by default. Click on Add. ⇒ The dialog box Add User appears. Enter a login name, for example ‘Dev1’, and a password. Leave the option Activated activated. Click on OK. ⇒ On creating a group for the first time, CODESYS now requests you to authenticate yourself to perform this action. In this case, enter ‘Owner’ as the current user. Do not enter a password, just click on OK. The user Dev1 appears in the list and is automatically a member of the group 'Everyone'. Change to the tab Groups, in order to add the user to a new group. ⇒ The groups Everyone and Owner have already been created. Click on Add in order to open the dialog box Add Group. Specify at least one name for the new group, for example ‘Developers’. Activate the checkbox next to the entry User ‘Dev1’ in the field Members. Click on OK. ⇒ The group Developers now appears with has user member 'Dev1'. Switch to the Users tab. ⇒ The user Dev1 now appears as a member of the groups ‘Everyone’ and ‘Developers’.
Last updated: 2024-01-24
Post by full0pullpolen on Device User Logon
CODESYS Forge
talk
(Post)
The following guide describes how you can adapt the user management for the first time in a project. It deals with the definition of a user and a group to which he belongs. Requirement: the project for which the user management is to be set up is opened. There is no adapted user configuration yet. Select Project Settings ‣ Users and Groups and then the Users tab. The user Owner is already created by default. Click on Add. ⇒ The dialog box Add User appears. Enter a login name, for example ‘Dev1’, and a password. Leave the option Activated activated. Click on OK. ⇒ On creating a group for the first time, CODESYS now requests you to authenticate yourself to perform this action. In this case, enter ‘Owner’ as the current user. Do not enter a password, just click on OK. The user Dev1 appears in the list and is automatically a member of the group 'Everyone'. Change to the tab Groups, in order to add the user to a new group. ⇒ The groups Everyone and Owner have already been created. Click on Add in order to open the dialog box Add Group. Specify at least one name for the new group, for example ‘Developers’. Activate the checkbox next to the entry User ‘Dev1’ in the field Members. Click on OK. ⇒ The group Developers now appears with has user member 'Dev1'. Switch to the Users tab. ⇒ The user Dev1 now appears as a member of the groups ‘Everyone’ and ‘Developers’.
Last updated: 2024-01-24
Post by full0pullpolen on Device User Logon
CODESYS Forge
talk
(Post)
The following guide describes how you can adapt the user management for the first time in a project. It deals with the definition of a user and a group to which he belongs. Requirement: the project for which the user management is to be set up is opened. There is no adapted user configuration yet. Select Project Settings ‣ Users and Groups and then the Users tab. The user Owner is already created by default. Click on Add. ⇒ The dialog box Add User appears. Enter a login name, for example ‘Dev1’, and a password. Leave the option Activated activated. Click on OK. ⇒ On creating a group for the first time, CODESYS now requests you to authenticate yourself to perform this action. In this case, enter ‘Owner’ as the current user. Do not enter a password, just click on OK. The user Dev1 appears in the list and is automatically a member of the group 'Everyone'. Change to the tab Groups, in order to add the user to a new group. ⇒ The groups Everyone and Owner have already been created. Click on Add in order to open the dialog box Add Group. Specify at least one name for the new group, for example ‘Developers’. Activate the checkbox next to the entry User ‘Dev1’ in the field Members. Click on OK. ⇒ The group Developers now appears with has user member 'Dev1'. Switch to the Users tab. ⇒ The user Dev1 now appears as a member of the groups ‘Everyone’ and ‘Developers’.
Last updated: 2024-01-24
Post by thecolonel26 on How to use FB_Init with nested Function Blocks?
CODESYS Forge
talk
(Post)
Delete ME
Last updated: 2023-08-31
Post by eschwellinger on Code Size
CODESYS Forge
talk
(Post)
will start with next relaese on RTE, at the moment not possible.
Last updated: 2023-09-08
Post by auwallle on FILE_OPERATION_DENIED
CODESYS Forge
talk
(Post)
Hi @eschwellinger Is this new with SP19? Or Hardware based?
Last updated: 2023-09-26
Post by eschwellinger on PFC200 Update to 4.9.0.0 - No Connection
CODESYS Forge
talk
(Post)
which PFC Firmware is this? -check with wbm
Last updated: 2023-09-28
Post by eschwellinger on Raspberry Pi 5
CODESYS Forge
talk
(Post)
Sure will come with 4.11.0.0 release.
Last updated: 2023-12-06
Post by solve-it on SysFileOpenAsync
CODESYS Forge
talk
(Post)
@Edwin Schwellinger: Would this work with a raspberry pi also?
Last updated: 2024-07-16
Post by hambergg on Retain Variables on fRAM
CODESYS Forge
talk
(Post)
Hi regarding NVRAM with SPI or I2C I expected reference too!
Last updated: 2024-09-03
Post by ellocco on Problems with simulation in Window 10
CODESYS Forge
talk
(Post)
@fscardovi You might check the location of your CODESYS.exe.
Last updated: 2024-10-16
Post by eschwellinger on Can't open license manager with raspberry CM4
CODESYS Forge
talk
(Post)
no, but why not staying on Arm SL?
Last updated: 2024-10-16
Post by winki on Scan Network on gateway created with Control Sl
CODESYS Forge
talk
(Post)
Thx it is working !
Last updated: 2024-10-23
Post by eschwellinger on Run Bootproject with Linux Command
CODESYS Forge
talk
(Post)
sudo /etc/init.d/codesyscontrol start
Last updated: 2024-12-17
Post by ph0010421 on Help with __SYSTEM.VAR_INFO
CODESYS Forge
talk
(Post)
thanks...I changed to I POINTER which is perfect.
Last updated: 2025-01-26
Post by eschwellinger on Raspberry Pi 5 GPIO not working.
CODESYS Forge
talk
(Post)
3th April with the 4.15.0.0 release
Last updated: 2025-04-01
Post by wbj0t on Update project from SP20 to SP21
CODESYS Forge
talk
(Post)
Done with it: Project->Enviroment->Visu Profile. Solved.
Last updated: 2025-06-09
Post by viot on Problem with Licences IDE 3.5.16.40
CODESYS Forge
talk
(Post)
Please, How contat service support to receive help?
Last updated: 2025-06-30
Post by eschwellinger on Eoe issues with Windows and Linux
CODESYS Forge
talk
(Post)
guess it should be tap0
Last updated: 2023-12-19
Post by eschwellinger on Eoe issues with Windows and Linux
CODESYS Forge
talk
(Post)
use latest Ethcat version 4.6.0.0 and tap0
Last updated: 2024-01-10
Post by eschwellinger on ERROR no connection With RPI
CODESYS Forge
talk
(Post)
package directory does not match...
Last updated: 2024-01-11
Post by mondinmr on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia
CODESYS Forge
talk
(Post)
Last updated: 2024-02-13
Post by eschwellinger on Access to the path *** is denied
CODESYS Forge
talk
(Post)
now solved with the release Visualisation Support V4.3.1.0.
Last updated: 2024-02-15
Post by valenting on Can't use new licensing with Raspberry Pi
CODESYS Forge
talk
(Post)
Thank you, it worked
Last updated: 2024-04-22
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.