Post by timvh on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
You can consider using OR_ELSE: Coils[0] := Coils[0] OR_ELSE (Buttons[0] AND Sensors[0] > 6); https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_or_else.html IF Coils[0] is TRUE, then the rest is not relevant anymore and doesn't have to be evaluated anymore. PS, there is also an AND_THEN https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_and_then.html
Last updated: 2025-03-08

Post by hassaank on CODESYS V3+ WAGO PFC200+ MODBUS RTU ^{CODESYS Forge talk (Post)}
Hi everyone, I’m new to CODESYS and Wago devices, and I’m trying to set up Modbus RTU communication. I have a Wago PFC200 (8110) and a 750-653 RS485 module, and I want to read data from an energy meter using Modbus RTU. Thanks in advance for your help!
Last updated: 2025-03-17

Post by yannickasselin on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
I have been running Codesys IDE in VirtualBox on a Linux Mint host for many many years without issues. I use it every day and it works great. I wouldn't mess around with wine. Would probably just be a waste of time. Codesys Go might be the future of PLC programming on Linux! Can't wait to test it.
Last updated: 2025-03-17

Post by eschwellinger on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
Yes, either adding in the CODESYSContro_User.cfg because the driver will no longer appear in the list or type the name from the documentation in the configuration and when the gray check mark appears, the driver is also installed. It is just not selectable anymore.
Last updated: 2025-03-21

Post by jba-eltech on Moving Frames ^{CODESYS Forge talk (Post)}
Hello everyone. I am using Codesys and saw in a YouTube video on the Codesys channel (https://www.youtube.com/watch?v=y_l2siXY7dA) that you can create frames and move them with the mouse. However, the video does not show how to do this. Can someone please explain it to me? Thank you very much.
Last updated: 2025-04-01

Post by rov-dk on Professional Developer Edition (git): Invalid URI ^{CODESYS Forge talk (Post)}
Hi All, I'm using git (1.4.0.0) in CoDeSys (Rexroth ctrlX 3.4 / CoDeSys 3.5.20.30). Every time I click on a modified file in the "Git Status & Staging" view I get the message out of attached file. I do not find any hint: Does anybody have an idea what the cause is? Thanks in advance.
Last updated: 2025-04-28

Post by chanmina on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
For a long time now, I have used VirtualBox on a Linux Mint host to run the Codesys IDE without any problems. Every day, I put it to good use, and it never fails. Wine is not something to be trifled with. Probably not worth the effort. For Linux PLC developers, Codesys Go might be a game-changer. Very excited to give it a try.
Last updated: 2025-05-27

Post by laurits on Max lines of code, codesys CNC ? ^{CODESYS Forge talk (Post)}
Testing Codesys CNC. SMC Interpolator Throws me an error if my code surpass approximately 32000 lines of code. (SMC_CNC_INTERNAL_ERROR) What is the max lines of code SMC Interpoltor can handle ? I've been thinking breaking the code up into smaller sections, but that gives me a lot problems later if i want to use "Blocksearch" etc. I need to run approximately 2000000 lines of code.
Last updated: 2025-06-01

Post by selim on LS ix7nh Servo drive with Codesys ^{CODESYS Forge talk (Post)}
Hello Mr./Ms., I do not find the ES driver in codesys. The setup of the project is "Rasberry PI3B>Ls ethercat I/O aps-ec-dt32k> LS ix7nh Servo drive>apmc-fbl04amk LS servo motor". How can i slove this problem. Please provide me a proper solution.
Last updated: 2025-06-02

Post by nano on CoDeSys V3.5.19.7 Code erzeugen dauert extrem lange ^{CODESYS Forge talk (Post)}
da kenne ich einige Ursachen: - Antimalwareserviceexecutable - Projekt liegt am Netzlaufwerk - Projekt liegt in OneDrive - Die Festplatte ist voll - Arbeitsspeicher ist voll - Netzwerkanbinding ist mangelhaft - Windows-Update ist fehlerhaft oder es steht noch ein Neustart aus Das sind so die am häufigsten auftrettenden Probleme im Zusammenhang mit dem verhalten. Ab und an hilft auch eine Neuinstallation von Codesys
Last updated: 2025-06-09

Post by fkoenig on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Hallo Herr Schwellinger, wenn ich den KNX Stack in Ihrem Pfad des Configfiles hinzufüge, funktioniert es. Vielen Dank für Deine Unterstützung! Es wäre aber sehr hilfreich wenn dies in dem KNX Dokument oder in der der CoDeSys Hilfe mit drin stehen würde. Viele Grüße, Koeni
Last updated: 2025-07-14

Post by timvh on Execute Codesys Tests with python ^{CODESYS Forge talk (Post)}
If you want to use the Test Manager, I prefer to start all the tests through the scripts of this manager. So open from there the projects, load it and run it. If you also want to use Python scripts to access CODESYS functionality, while executing a Test Manager script, then also start them from the Test Manager commands.
Last updated: 2025-07-23

Post by sym121 on Ghostwriter gesucht für Codesys Projekt in Funktionsbausteinsprache (mit Vergütung/Bezahlung!)? ^{CODESYS Forge talk (Post)}
Hallo zusammen, ich suche eine zuverlässige Person mit fundierten Kenntnissen in CODESYS (FUP) bei einem Automatisierungsprojekt im Rahmen meines Studiums. Ich schreibe aktuell meine Bachelorarbeit und habe kaum Zeit mich für dieses Projekt eines noch nicht abgeschlossenen Modul zu kümmern. Suche daher einen Ghostwriter bzw. Programmierer der mir mein Projekt gegen faire Bezahlung erstellt. Bei Interesse gerne melden.
Last updated: 2025-07-27

Post by sym121 on Ghostwriter gesucht für Codesys Projekt in Funktionsbausteinsprache (mit Vergütung/Bezahlung!)? ^{CODESYS Forge talk (Post)}
Hallo zusammen, ich suche eine zuverlässige Person mit fundierten Kenntnissen in CODESYS (FUP) bei einem Automatisierungsprojekt im Rahmen meines Studiums. Ich schreibe aktuell meine Bachelorarbeit und habe kaum Zeit mich für dieses Projekt eines noch nicht abgeschlossenen Modul zu kümmern. Suche daher einen Ghostwriter bzw. Programmierer der mir mein Projekt gegen faire Bezahlung erstellt. Bei Interesse gerne melden.
Last updated: 2025-07-27

Post by llewv123 on Codesys Control for RPi and Waveshare AD/DA hat ^{CODESYS Forge talk (Post)}
Good day, I am attempting to use a Waveshare AD/DA precision HAT with RPi 4B+, using Codesys Control for Rpi. The waveshare hat uses SPI. I am successfully using the RPi GPIO (inputs and outputs) but do not know how to access the AD/DA channels. Any help would be appreciated.
Last updated: 2025-08-04

Post by eschwellinger on Codesys Virtual control SL ^{CODESYS Forge talk (Post)}
Hi, which CODESYS Version are you using exactly? Either update to 3.5.21.x if you are on 3.5.20.x if not - add a more secure pw. Seems that on adding the login credentials it is mandatory in 4.16.0.0 -to have complianct to password policy seems a bug that the message not occure.
Last updated: 2025-08-06

Post by rajatdas2005 on Codesys Virtual control SL ^{CODESYS Forge talk (Post)}
Thanks once again. Right now the codesys virtual control sl docker is using the host ip itself not the docker ip. so the local host edge gateway was able to search the virtual plc. so you are telling me instead of local host edge gateway I should use the edge gateway docker version?
Last updated: 2025-08-08

Post by wagokurt on TargetVisu option missing in IDE ^{CODESYS Forge talk (Post)}
I have installed both the Codesys Control for Linux SL 4.16.0.0 and Target Visu for Linux 4.16.0.0 packages in Codesys 3.5 SP21 Patch2. When I try to add a target visu, it is missing. I have spent hours on this and tried different machines, all behave the same way. Is this a bug?
Last updated: 2025-08-21

Post by timvh on update data/tim ^{CODESYS Forge talk (Post)}
Change the actual time of your PLC. How to do this sometimes depends on the PLC you use. Please contact the vendor of the PLC to get this information. Or see the following example for using CODESYS date and time functions: https://forge.codesys.com/prj/codesys-example/date-and-time/home/Home/
Last updated: 2025-08-26

Post by fkoenig on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Hallo Herr Schwellinger, ich habe in Codesys die KNX Datei nach ETS exportiert und in der ETS eingefügt. Leider lässt sich in der ETS nicht die physikalische Adresse zuweisen. Den Programmier Button wird im KNX Stack betätigt, doch leider wird diese nicht quittiert und die physikalische Adresse zugewiesen. Woran kann dies liegen? Anbei habe ich Ihnen der Device Log. Viele Grüße, Koeni
Last updated: 2025-09-01

Post by timvh on CoDeSys v3.5: creating libraries for both 32-bit and 64-bit controllers ^{CODESYS Forge talk (Post)}
Yes, you are right. I think the help is pretty clear: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_library_development.html It helps you to find errors in the source code of your library if you want to create a library which is using pointers and you want to use your library on 32 and/or 64 bit platforms.
Last updated: 2025-09-02

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
Hello, Today I have the problem again. The code in my IDE is the same as the code in the runtime but I cannot Log in to the PLC without download. Juste because the Download information is 'None'. And I don"t know how is managed this information bu Codesys. I'M WAITING SINCE 17 MONTHS, CAN I PLEASE HAVE A ANSWER FROM CODESYS?
Last updated: 2025-09-18

Post by bilalchaudhry33 on IFM Controller CR7XXs ^{CODESYS Forge talk (Post)}
HI, I am new to Embedded and telematic field . I am using codesys to program IFM controller and try to communicate two IFM controller over the CAN bus. I need some help and link tu tutorial I have no idea about codesys . I want to do in ST. I am using CAN RAW library from IFM . On following SS there is red triangle on CAN as well.
Last updated: 2025-09-24

Post by gseidel on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi liai, I tried it with a fresh CODESYS SP21 Patch 2 installation and SoftMotion 4.18, but cannot reproduce the compile errors. Could you please upload a project archive that has the errors? Then I can have a deeper look. https://dl.codesys.com/s/q4KcbKCcZndg6oR Best regards, Georg
Last updated: 2025-09-24

Post by snhatton on Testing of Codesys program ^{CODESYS Forge talk (Post)}
There is a tool called test manager that is part of the Professional Developer's Edition of CODESYS. I would take a look at this tool for your testing purposes. There is a free 30-day trial so you can evaluate if the tool will meet your needs before investing in the license.
Last updated: 2023-12-08

Sort by relevance or date