Post by simonep on new version of CODESYS have problem to load GSDML files ^{CODESYS Forge talk (Post)}
I am trying to load a GSDML file of a PROFINET gateway device
Last updated: 2024-05-20

Post by simonep on new version of CODESYS have problem to load GSDML files ^{CODESYS Forge talk (Post)}
I am trying to load a GSDML file of a PROFINET gateway device
Last updated: 2024-05-20

Post by simonep on new version of CODESYS have problem to load GSDML files ^{CODESYS Forge talk (Post)}
I am trying to load a GSDML file of a PROFINET gateway device
Last updated: 2024-05-20

Post by smartcoco on Add visual background FB blocks. ^{CODESYS Forge talk (Post)}
Can you add a background FB block to the visualization page, and loop through this FB block when the page is in display mode. This FB block requires two more functions, one for executing when the page is displayed and the other for executing when the page is closed.
Last updated: 2024-01-16

Post by pasillalej on No gateway with the given settings could be found ^{CODESYS Forge talk (Post)}
Go to Online>Communication Parameters...>Gateway>TCP/IP> Click on "New..." and reestablish your connections with whatever IP address and set up information you have. Bypass whatever is necessary as you may have to redownload to the PLC.
Last updated: 2024-05-09

Post by arfoto on Gateway ^{CODESYS Forge talk (Post)}
Merhaba Gateway config moda almak istediğimde BU hatayı alıyorum. maalesef bu sorunu çözemiyorum amacım softplc yi Automation Server a Bağlamak Ama maalesef config moda giremiyorum dosya yolumda C:\ProgramData\CODESYS\CODESYSGatewayV3 bu şekilde. Teşekkür ediyorum.
Last updated: 2024-09-17

Post by fugtwad on Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected ^{CODESYS Forge talk (Post)}
ABB Automation Builder v2.5.0.22 Premium CodeSys 2.3.9.62 Running on Win 10 VM x64 Goal: I have an EtherCAT topology issue which normally a "Scan for devices.." on the EtherCAT master would shed some light on. Issue: Upon trying such I get a "No gateway selected" error. Question: How might I point the the "scanner" at a gateway? What is working: Gateway is running in system tray. I can go online to PLC. A scan from the "Diagnostics live" tab of the EtherCAT master gives slave status. What I have tried: Restarting gateway in system tray. Exiting system tray gateway and reloading it. Turning off firewall. Contacting ABB support multiple times. Any help appreciated.
Last updated: 2024-05-20

Post by eschwellinger on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
need the log file - or you write/send it in the CODESYS store my question
Last updated: 2024-01-10

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
as a workaround just plug your USB key to the CODESYS PC - and activate the ticket by the browser license.codesys.com
Last updated: 2024-03-27

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
Is this a computer with installed CODESYS ? Codemeter is needed to activate licenses via Browser...
Last updated: 2024-04-17

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
yes add in: c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSGatewayV3\XXXXXXXX\Gateway.cfg [CmpEdgeGateway] MaintenanceMode=1
Last updated: 2024-10-21

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
I believe the reason that I eventually lose my ability connect is because of exceeding the time limit for demo mode. Still unsure why I cannot update the edge gateway though.
Last updated: 2023-09-13

Post by vamsi on How to configure gateway for programming RPi 2B using Codesys ^{CODESYS Forge talk (Post)}
I am using a Raspberry Pi 2B. Installed Codesys V3.5.20.1 64-bit and installed 'CODESYS Control for Raspberry PI 4.12.0.0' I am able to install the packages using the 'Update Raspberry Pi' option, but when I try to log into the RPi, in the Device tab it says 'Sacn fail. Please checl that the gateway is running and that its settings are correct'. My setup looks like this. I connected my RPi to my company LAN and also my laptop to company LAN (using HP Docking station). This setup worked when I installed 'CODESYS Control for Raspberry PI', but now I donot know how to configure the gateway. Could anyone please help me in finding what I have to enter in the gateway configuration? Thanks, Vamsi.
Last updated: 2024-07-10

Post by vamsi on How to configure gateway for programming RPi 2B using Codesys ^{CODESYS Forge talk (Post)}
I found out what I was doing wrong. I was entering the wrong IP in the gateway. I found that I have to enter the RPi's IP in the gateway field from this post https://forge.codesys.com/forge/talk/Runtime/thread/01703ca970/#d9f6 But I do not understand why it has to be the RPi's IP. Could anyone help me in clarifying this?
Last updated: 2024-07-10

Post by timvh on when going online, stuck on "Syncing file "visuelemsdatetime.tl_datetime.txt" ^{CODESYS Forge talk (Post)}
I don't know the root cause... But what could help to continue when it seems to hang, is stop the CODESYS (communication) Gateway. Go to the Windows SysTray, find the icon for the Gateway and then stop it and start it again. This will interrupt the connection between CODESYS and your controller.
Last updated: 2024-03-05

Post by danwoodlock on RPI zero W - cant install edge gateway ^{CODESYS Forge talk (Post)}
I see now this is the wrong section. Please close this thread, and I'll repost in the runtime section.
Last updated: 2023-09-13

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
Thank you for the recommendation! attached result of 'usname -a'
Last updated: 2023-09-13

Post by markosrod on License problem gateway ^{CODESYS Forge talk (Post)}
i have the same error with when i try to validate de license of the libraries. can you help me?
Last updated: 2024-04-02

Post by dekelec on Codesys 2.3 & Peak PCAN ^{CODESYS Forge talk (Post)}
IF you have an USB interface type in "Peak_USB" for CAN card driver (Name of CAN card driver). No need to add libraries for communication via CoDeSys Gateway. For other card types contact PEAK support and they will help you. Regards,
Last updated: 2024-07-08

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello, I couldn't figure what/where the issue was, so I deleted everything from automation server and reinstalled the edge gateway and did the process again. It worked for about a month and then it stopped working again. It presents the same symptom, edge gateway is online but I can't connect to the PLC. Any idea of what could be the issue? Thank you!
Last updated: 2024-01-09

Post by danielbeers on Automation Server + Pi Gateway + PLC w/ CAN ^{CODESYS Forge talk (Post)}
Hello, I have a project using some EPEC PLC's. Some of them are programmable using Ethernet and some use CAN. We currently have a Raspberry Pi that is acting as a gateway to the Codesys Automation Server and is successfully working for the PLC's communicating over ethernet. I am trying to achieve a similar result for the PLC's that have only CAN access. I have PEAKCan drivers on the Pi, and can successfully send/receive messages. But the Gateway does not recognise the PLC when scanned from the Automation server online. Is there a library or service that exists to translate the CAN messaging, to the Edge Gateway, and be able to achieve remote access with the Automation Server? Or is this not possible without creating something custom? Cheers, Daniel
Last updated: 2024-09-22

Post by timvh on Remote connection to ifm PLC & HMI ^{CODESYS Forge talk (Post)}
Maybe also good to know that you could use the CODESYS installer to switch between gateways. - open the CODESYS installer - Select the (hamburger) menu - Select Settings - Select Services Then select the Gateway you would like to use.
Last updated: 2024-04-23

Post by programmierer on No gateway with the given settings could be found ^{CODESYS Forge talk (Post)}
Hello eschwellinger, would it be possible for you to also review my issue? you can find it under this link https://forge.codesys.com/forge/talk/CODESYS-V2/thread/c6ec7fd23a/
Last updated: 2024-08-02

Post by janber0206 on Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Post)}
Solved (see comment) Setup: Kunbus RevPi Connect+ (a raspberry based PLC) Codesys runtime package: 4.5.0.0 (raspberry, armhf) based on Codesys V3.5.18.20 Edge Gateway: 4.5.0.0 (edgearmhf,armhf) EN: The edge-gateway was added over a year ago to the automation server. I now need to make a few changes to the Codesys software, but the Pi is not showing as online in the Automation Server. Internet connection is established, I have remote access to the Pi via RealVNC. Anyone have an idea how I can solve this? Some screenshots added. DE: Ich muss nun ein paar Änderungen an der Codesys-Software vornehmen, aber der Pi wird im Automation Server nicht als online angezeigt. Die Internetverbindung ist hergestellt, ich habe über RealVNC Fernzugriff auf den Pi. Hat jemand eine Idee, wie ich das Problem lösen kann?
Last updated: 2023-10-26

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello, Up until yesterday (2023/11/20) I was able to connect to the PLC remotely with no issues through Edge Gateway. However, today I can see the Edge Gateway online but I can find the PLC even if I do a network scan. Following the same path as janber0206 @ https://forge.codesys.com/forge/talk/automation_server/thread/e78b11d7e9/, I looked into certificates and found that one of the Trusted publisher certificates has expired earlier today (2023/11/21). Please see image. Questions are: Does it affect the connection to the PLC through Edge Gateway? How do I fix it? Thank you very much in advance!
Last updated: 2023-11-21

Sort by relevance or date