Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
I have been struggling for over a week to program my rapspberry pi 4 with codesys. I purchased the license. I installed the runtime and the gateway, and I can see the pi in the communication settings. But cannot log in. I have checked the status of the pi with sudo systemctl status codesyscontrol and it is running. I have enabled traffic to and from the pi with iptables and checked the logs and all looks good. I just cannot connect through the codesys ide. Can anyone help me before I lose my mind?
Last updated: 2024-06-22

Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
I have been struggling for over a week to program my rapspberry pi 4 with codesys. I purchased the license. I installed the runtime and the gateway, and I can see the pi in the communication settings. But cannot log in. I have checked the status of the pi with sudo systemctl status codesyscontrol and it is running. I have enabled traffic to and from the pi with iptables and checked the logs and all looks good. I just cannot connect through the codesys ide. Can anyone help me before I lose my mind?
Last updated: 2024-06-22

Post by kurtk on dynamic modbus devices ^{CODESYS Forge talk (Post)}
I am CODESYS neophyte getting my wheels on. My goal is to re-platform an existing PLC application written in 61131 ST I've got the majority of the code/variables in a compilable form - excluding all the IO and comms nuances I am not sure whether this the right forum An important functionality which I implemented on the other platform was totally dynamic modbus devices... Most configurations I have come across impose static MB configs in which all configured devices MUST be present and functional... I have monkeyed around with MB enough to know that herding a half dozen MB cats into a working config can be tricky. I just do them one at a time and dynamically turn them on/off in whatever combination is convenient with ID, IP, baud, parity etc being runtime tweakable. I am totally curious whether this is possible with codesys, or whether its device configuration corrals one into a static cage which requires re-building the code to support flexible variations. Best regards
Last updated: 2025-08-19

Post by kurtk on runtime dynamic modbus devices ^{CODESYS Forge talk (Post)}
I am CODESYS neophyte getting my wheels on. My goal is to re-platform an existing PLC application written in 61131 ST I've got the majority of the code/variables in a compilable form - excluding all the IO and comms nuances I am not sure whether this the right forum An important functionality which I implemented on the other platform was totally dynamic modbus devices... Most configurations I have come across impose static MB configs in which all configured devices MUST be present and functional... I have monkeyed around with MB enough to know that herding a half dozen MB cats into a working config can be tricky. I just do them one at a time and dynamically turn them on/off in whatever combination is convenient with ID, IP, baud, parity etc being runtime tweakable. I am totally curious whether this is possible with codesys, or whether its device configuration corrals one into a static cage which requires re-building the code to support flexible variations. Best regards
Last updated: 2025-08-19

Post by beavel on Feature Request: Text List Formatting ^{CODESYS Forge talk (Post)}
Hi everyone, I'm working on a multilingual help system within a CODESYS visualization project and have run into a limitation with the current text list (.tlx) functionality. Right now, text list entries only support plain text, which makes it very difficult to format longer help texts in a readable way. For example, I’d like to: Use bold headers and larger font sizes for section titles Display variable names or keywords in italics Avoid having to split content into dozens of separate entries just to apply different styles This becomes especially unmanageable when supporting multiple languages — duplicating layout logic across languages is not scalable. Would it be possible to implement a Markdown text functionality for text list entries ? For example: #Header ##Sub-header 1.ordered 2.list 3.fun 4.times Alternatively, is there any existing workaround or planned feature that allows for styled text blocks without fragmenting the content? Thank you in advance and have a nice day :)
Last updated: 2025-09-23

Post by dwpessoa on CNC Jumps G20 - SMC_NCInterpreter and long time to process ^{CODESYS Forge talk (Post)}
I am studying and developing a Softmotion+CNC system for a machine that executes multiple pieces. The G code program is written by the machine operator and each cycle execute 1 piece. The programs are large, exceeding 1000 lines and using up to 8 axes (X, Y, Z, A, B, C, P and Q). The machine needs to run cyclically, executing N pieces (selected by the Operator)... so I tested it using Looping and counters (G36 G37 and G20) and it worked, but it takes a long time to process, and the more pieces I need, the longer the processing time and this is totally impracticable. I found this solution which was very good, and for a few cycles it works well, but for 99999 pieces of a program with 1000 lines, it doesn't work very well... Another solution I tested is to maintain the interpolator with an automatic restart, that is, I load the program without looping (without G20) and give it another start as soon as it finishes. This partially resolved it, but there is still a delay in processing SMC_NCInterpreter in each restart :(. Another solution I thought of is to manually create the SMC_GEOINFO structure and then reuse it, avoinding the Interpreter, but reading the documentation and checking the structure filled by standard blocks, I noticed that there doesn't seem to be a "JUMP" function in the structure! In other words, the SMC_NCInterpreter actually keeps copying and copying the program section for each jump (G20)... If I repeat a 10-line program 1000 times, I will have a structure with more than 10000 lines... possibly this is the cause of take so long to process. Has anyone ever had a problem like this? I believe the same thing happens with typical applications with manipulator robots using Codesys in continuous cycles, and I would like to know if there is any solution, or even if I am misinterpreting the G20 question in SMC_GEOINFO. Thanks!
Last updated: 2023-09-20

Post by dkugler on Management of a PLC network from a remote station ^{CODESYS Forge talk (Post)}
I would figure out, how to create a simple html webpage with 2 frames. One frame with buttons to select the plc. A second frame with hyperlink to the webvisu of the plc ("XXX.XXX.XXX.XXX:8080/webvisu.htm"). Selecting other PLC Button has to change the hyperlink in 2. frame. Costs only some time to figure out :-) Or setup a raspberry Pi with small visualization. Set up a button for each plc and add one browser element. Each button writes the URL of the depending plc to the URL setting of the browserelement. Costs 55€ for runtime licence and a Raspberry Pi.
Last updated: 2023-12-04

Post by user3000 on Can't find an Extended Pulse Timer (TP and LTP) ^{CODESYS Forge talk (Post)}
I came up with an FBD that seems to be working, although it may not be a true Retriggerable Pulse timer. There may be some delay associated with the two MOVE functions and ADD function I incorporated. I'd be interested if anyone is able to come up with something cleaner. I am surprised that this is not a built-in function block of the CodeSYS library. This is a common feature of multi-function timer relays. I also attached a page from the cut sheet of a Schneider relay that shows 10 timing functions. Looks like the CodeSYS library has built-in function blocks for only 3 of the 10.
Last updated: 2023-12-21

Post by k2saki on CNC / G-Code streaming processing ( to start quickly in long G-Code File ) ^{CODESYS Forge talk (Post)}
Is it possible like G-Code streaming processing (like FANUC or SIEMENS DNC Function )? Or Does anyone know the tips for CODESYS Motion to start moving long Long G-Code File quickly? I have to wait long time after "Start" button to start moving, I have to wait finishing interpreting whole G-Code file, ( and I have to prepare huge buffer to store. ) Now, I'm working on my CNC Project using SMC_ReadNCFile2, and SMC_NcInterpreter to preprocess G-Code. I tried to set SMC_Interpolator.xExecute to true to Start while after SMC_NcInterpreter processed more 50-line of G-Code, but that not worked, I had to wait SMC_NcInterpreter processed all lines to start SMC_Interpolator. G-Code have about 2000 lines of XY of G01 (or more over.. ) of short segment that a CAM software has exploded from NURBS Curve.
Last updated: 2024-05-03

Ranges, Lambdas, on Fixed arrays of structs ^{CODESYS Forge talk (Thread)}
Ranges, Lambdas, on Fixed arrays of structs
Last updated: 2023-08-31

Save jitter measure of main task in file ^{CODESYS Forge talk (Thread)}
Save jitter measure of main task in file
Last updated: 2020-08-07

Ged rid of lines on Chart XY ^{CODESYS Forge talk (Thread)}
Ged rid of lines on Chart XY
Last updated: 2022-04-05

Resolution of visualization (for RPi's LCD 800x480) ^{CODESYS Forge talk (Thread)}
Resolution of visualization (for RPi's LCD 800x480)
Last updated: 2015-11-22

The configuration file of the PLC ^{CODESYS Forge talk (Thread)}
The configuration file of the PLC
Last updated: 2016-04-11

Where is data of ENIP getAttributeSingle stored? ^{CODESYS Forge talk (Thread)}
Where is data of ENIP getAttributeSingle stored?
Last updated: 2023-04-20

Adding a scaling factor to text sizes of different languages ^{CODESYS Forge talk (Thread)}
Adding a scaling factor to text sizes of different languages
Last updated: 2017-03-31

Variable number of arguments in a user-defined function ^{CODESYS Forge talk (Thread)}
Variable number of arguments in a user-defined function
Last updated: 2012-01-08

The intent of two Library Managers in a Project ^{CODESYS Forge talk (Thread)}
The intent of two Library Managers in a Project
Last updated: 2016-08-22

Access project information of references library by script ^{CODESYS Forge talk (Thread)}
Access project information of references library by script
Last updated: 2023-10-23

Axis variable indicating modulo of finite setting ^{CODESYS Forge talk (Thread)}
Axis variable indicating modulo of finite setting
Last updated: 2023-11-25

License status of Linux 64Bit runtime via CLI ^{CODESYS Forge talk (Thread)}
License status of Linux 64Bit runtime via CLI
Last updated: 2023-12-04

Management of a PLC network from a remote station ^{CODESYS Forge talk (Thread)}
Management of a PLC network from a remote station
Last updated: 2023-12-04

Extracting information out of a *.library or *.compiled-library file ^{CODESYS Forge talk (Thread)}
Extracting information out of a .library or .compiled-library file
Last updated: 2023-12-04

OPC UA RPI 4.8.0.0 Status Code / "out of range" ^{CODESYS Forge talk (Thread)}
OPC UA RPI 4.8.0.0 Status Code / "out of range"
Last updated: 2024-07-10

Number of Connections to Modbus TCP Slave ^{CODESYS Forge talk (Thread)}
Number of Connections to Modbus TCP Slave
Last updated: 2024-08-01

Sort by relevance or date