Post by mrkm-dic on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Hi! thanks for reply. We tested the configuration you proposed as well; however, when the cable between the controller and the switch was disconnected, the Active and Standby roles were swapped. Did you observe the same behavior in your configuration using WAGO and Beckhoff?
Last updated: 2026-02-06

Post by gatto on Backtick identifiers ^{CODESYS Forge talk (Post)}
Hello, I’m in Codesys 3.5.20.40 and I try to declare the variable ´var1´ but I get an error. here : https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_rules.html i read : Backtick identifiers By using backticks, characters can also be used in identifiers that are not normally permitted in identifiers, such as special characters. The acute accent character is used for backticks: ´ (Unicode: U+02CA) The use of backticks is recommended in order to be able to use the same identifiers in CODESYS as in other programming languages or documents, such as circuit diagrams. Any character may be used between two backticks, except line breaks and other backticks. Keywords are also allowed as identifiers between backticks. Examples: ´Variable+9´ ´INT´ The backticks are part of each identifier and therefore var1 and ´var1´ are two different identifiers. Example PROGRAM PLC_PRG VAR var1 : INT; ´var1´: INT; END_VAR var1 := var1 + 1; ´var1´ := 12; Are there any limitations or is something missing in my development environment?
Last updated: 2025-10-28

Post by eschwellinger on communication ^{CODESYS Forge talk (Post)}
depends on if you use PFC200 SL from CODESYS store or the Wago target for the PFC. If you use the SL product you need to setup the interface by a plcshell command...
Last updated: 2023-08-19

Post by viktorr on ShareMemory library documentation ^{CODESYS Forge talk (Post)}
Hello, I was wondering if there was further documentation on the SharedMemory library in CodeSys outside of the code example provided, or maybe a way to access the source code of the shared memory implementation. Thank you in advance for any advice. - Viktor
Last updated: 2024-07-03

Post by disha on Export data with the Trend API ^{CODESYS Forge talk (Post)}
Can you please share the code as i am the beginner for codesys. I don't have any idea that how sqlite is integrated with the codesys.
Last updated: 2024-07-08

Post by dantheman on Connecting to SoftPLC Only Works By Turning Off Modbus Ethernet Port ^{CODESYS Forge talk (Post)}
It's all good btw, learned that the runtime doesn't isolate the networks that are involved so changing the ethernet subnets away from the Wi-Fi's subnet was all I needed (maybe some config file changes helped, can't say for certain)
Last updated: 2024-08-08

Post by dennisyhli on Ethernet IP Connection timeout ^{CODESYS Forge talk (Post)}
I use ethernet ip scanner and the connection type is set to multicast. After running the PLC, the ethernet IP will have a connection timeout every 10 seconds. What is the reason for this error?
Last updated: 2024-08-16

Post by simon001 on CAN communication settings for USB2CAN-C ^{CODESYS Forge talk (Post)}
I am using the Innomaker USB2CAN-C device to communicate via CAN in the Windows version of CODESYS, but I am encountering error code 27E2, which indicates that the driver is not found. Could you please advise on how to proceed with the CODESYS settings?
Last updated: 2024-08-18

Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
If I select "Update boot aplication" while I download the code the persistent variables got a constant startup value. But during the running I am still not able make the persistent variables to hold they actual value.
Last updated: 2024-09-01

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under Sysfile.
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under [Sysfile]
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under [Sysfile]
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under [Sysfile]
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under [Sysfile]
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under Sysfile
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under Sysfile
Last updated: 2024-10-09

Post by codesysbeginner on Alarms Placeholder ^{CODESYS Forge talk (Post)}
Hi, Yes this should be possible, you should find the CodesysControl.cfg file on your plc. Open this with a text editor, and change the placeholder filepath for alarms. You can find the Placeholder filepath in the CodesysControl file under Sysfile.
Last updated: 2024-10-09

Post by zatalian on Beckhoff EL7037 softmotion ^{CODESYS Forge talk (Post)}
The SM3_Drive_ETC_Beckhoff_EL70xx library has descriptors for the EL7031, EL7041 and EL7047 but not the EL7037? Is there another library that has the one I need?
Last updated: 2024-11-26

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Don't I need a browser on the device for web depot? Could work on the Pi but not the Wago controller. Maximum I have is SSH.
Last updated: 2025-01-08

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
I have now renamed my recipe to Parameter and now use SaveRecipeAs. The correct folder is displayed in the dialogue box, but the recipe is not saved. What could be the reason for this, write permissions? Recipe manager buggy?
Last updated: 2023-12-29

Post by dkugler on Ramp function ^{CODESYS Forge talk (Post)}
The util.RAMP_INT and util.RAMP_REAL from Codesys have an input for the start value. What is the advantage of this OSCAT ramp instead of the Codesys util lib?
Last updated: 2024-01-10

Post by irshad on Modbus TCP/IP slave communication errow ^{CODESYS Forge talk (Post)}
While reading the value of a slave device, it shows error frequently and i need to restart my PLC for getting the communication back. In codesys it shows the slave in Red color with error status. How to solve the above
Last updated: 2024-02-03

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Sort by relevance or date