Post by mehmetembedded on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
Hello. I am using TI AM64x evaluation board TMDS64EVM. It has 8 leds connected via I2C to SoC.I wanna control them via codesys GPIO device. Is that possible? If so how I can do it. I had no problem installing codesys runtime, and running program on device. But when it comes to GPIO access, It couldn’t make it.
Last updated: 2024-05-08

Post by mehmetembedded on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
Hello. I am using TI AM64x evaluation board TMDS64EVM. It has 8 leds connected via I2C to SoC.I wanna control them via codesys GPIO device. Is that possible? If so how I can do it. I had no problem installing codesys runtime, and running program on device. But when it comes to GPIO access, It couldn’t make it.
Last updated: 2024-05-08

Post by yannickasselin on Linux ARM64 SL, GPIO Access ^{CODESYS Forge talk (Post)}
A bit of work but maybe possible to make your own driver using "CODESYS Control SL Extension Package". Look at the "ExternalIoDrv" example. It is installed in "C:\Program Files\CODESYS 3.5.20.0\CODESYS\CODESYS Control SL Extension Package" when you install the "CODESYS Control for Linux SL".
Last updated: 2024-05-08

Post by k2saki on Automatic TOOL Length Measurement like Typical CNC Machine. ^{CODESYS Forge talk (Post)}
I'd like to measure tool length using SW. How do I set variable from the accurate drive position when switch turn ON/OFF? Hopefully, I'd like to measure Z-Pos with M-Function in G-Code automatically, And I'd like to set it to G43 as tool length correction.
Last updated: 2024-05-09

Post by timvh on Change the Opening Position of the Dialog using VU.FbOpenDialog ^{CODESYS Forge talk (Post)}
Probably best to call the FB continuously. So something like this could solve it: IF xOpenLatchSettingDialog THEN xOpenLatchSettingDialog := FALSE; fbOpenLatchSettingsDialog.xExecute := TRUE; END_IF IF fbOpenLatchSettingsDialog.xDone OR fbOpenLatchSettingsDialog.xError THEN fbOpenLatchSettingsDialog.xExecute := FALSE; END_IF TopLeftDialog.iX := 100; TopLeftDialog.iY := 23; fbOpenLatchSettingsDialog( itfClientFilter:= VU.Globals.OnlyTargetVisu, sDialogName:= 'visu_AlarmLatchSettings', xModal:= TRUE, pTopLeftPosition:= ADR(TopLeftDialog) );
Last updated: 2024-05-09

Post by matthew on Persistence Manager Backup ^{CODESYS Forge talk (Post)}
Hi @eschwellinger yes I have been using xDoubleStorage It happened again and I checked and the files were still there with there contents, restarting codesys or rebooting would not even reload them. Doing a download and then starting the PLC loaded them and began working again. Some sort of mismatch error or something?
Last updated: 2024-05-14

Post by mani-i4point0 on CODESYS Development System V3 ( 3.5.19.70 ) on Windows Virtual Machine ^{CODESYS Forge talk (Post)}
Hi, I have a requirement where in need to install a CODESYS Development System V3 ( 3.5.19.70 ) on a Window 10 which is running in VM. Is there any limitation of functions and features of using CODESYS Development System V3 ( 3.5.19.70 ) installed in Window 10 which is running in VM. Please do advice. Best Regards, Mani
Last updated: 2024-05-14

Post by mani-i4point0 on CODESYS Development System V3 ( 3.5.19.70 ) on Windows Virtual Machine ^{CODESYS Forge talk (Post)}
Hi, I have a requirement where in need to install a CODESYS Development System V3 ( 3.5.19.70 ) on a Window 10 which is running in VM. Is there any limitation of functions and features of using CODESYS Development System V3 ( 3.5.19.70 ) installed in Window 10 which is running in VM. Please do advice. Best Regards, Mani
Last updated: 2024-05-14

Post by siscu on Raspberry Pi: List of available example applications ^{CODESYS Forge talk (Post)}
Could this be turned into a library? I'd love for a way to have the main program call a function block method using the program's I2C_master device. I assume I should be passing the master as a variable for the function block, but I don't see how that could be achieved
Last updated: 2024-05-15

Post by felipemsgarcia on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello, Without much info, I would assume that this is an optional object on the EtherCAT network and it's either disconnected or the address doesn't match. I would look into the devices manual or contact the manufacturer for further assistance. And, I would have posted a new topic instead of using a non related one... Cheers!
Last updated: 2024-05-16

Post by totorovic on IO-LINK Package - new license model ^{CODESYS Forge talk (Post)}
Hello, I'm using th IDE Combivis studio 6 (codesys based) and I get an error message when I use IO-link. "The license is missing or invalid. The API is running in demo mode." However the package Manager indicates that no licence is required. It used to work, it seems that the free package has become a paying one. Can Codeys confirm this? BR
Last updated: 2024-06-06

Post by installwhat on C0077 on one machine but not another ^{CODESYS Forge talk (Post)}
It doesn't load differently codesys seems to be behaving differently. Original version of ethercat master in project archive is 3.5.15.50, compiler is 16.4 as is codesys I'm using. It builds fine in vm and not on local machine. The reason is not obvious. It builds on local machine with ethercat master at 3.5.16.0. I'd really appreciate advice
Last updated: 2024-06-11

Post by calviniscoding on Publish a JSON payload via MQTT Publish (using IIot Libraries) ^{CODESYS Forge talk (Post)}
Are you able to dynamically change the JSON message? As in, if wsValue or iValue is linked to some real telemetry that varies over time, will the JSON message reflect these changes? I am only able to send the values that I initialize the JSON message to
Last updated: 2024-06-18

Post by rikher on Error: Too few outputs exixts for the box 'MemCopy' (minimum is 1). ^{CODESYS Forge talk (Post)}
I am using MemCopy Function for this example: https://www.youtube.com/watch?v=DeTCT5Vyn28&t=482s It is from library WagoSysPlainMem. I want to use this for an MQTT example. However, Codesys is complaining the block does not have outputs. How to fix this?
Last updated: 2024-06-19

Post by jeffersonhui on SysProcessExecuteCommand2 terminate ^{CODESYS Forge talk (Post)}
Hi, I am using the SysProcessExecuteCommand2 function from the SysProcess library to run the candump command in the PLC's Linux environment. However, the candump command stays running indefinitely. If I was running the candump command from a terminal (via PuTTy, etc), that command usually requires Ctrl+C to terminate. Is there a way to terminate a command that is executed with SysProcessExecuteCommand2?
Last updated: 2024-06-24

Post by ym4649 on Is there a way to run --runscript in linux system? ^{CODESYS Forge talk (Post)}
Hi, Is there a way to run --runscript in linux system? This help only explains how I can run --runscript by using .exe. I would like to run script inside linux system and retrieve variables in codesys via CLI. https://help.codesys.com/webapp/_cds_starting_script_via_command_line;product=codesys;version=3.5.17.0
Last updated: 2024-06-26

Post by koppit on SysComRead Timeout Parameter ^{CODESYS Forge talk (Post)}
Im using SysCom ver. 3.5.17.0 and seem to have the same issue on a Raspberry Pi. It's not waiting for the requested number of bytes, no matter if "ulTimeout := SYS_INFINITE" or any other value. The only solution I have found is to stall the program to allow the serial port to recieve the data.
Last updated: 2024-06-26

Post by davidbo on Toradex and CODESYS and licensing ^{CODESYS Forge talk (Post)}
I am evaluating a Toradex product for use with CODESYS. Toradex and CODESYS are partners, but using "CODESYS Virtual Control for Linux ARM64 SL" together with a carrier board "Verdin mallow" However it doesn't seem to be a soft container for licenses. So how do I install a license
Last updated: 2025-10-20

Post by josealb2000 on EL6910 as a PROFIsafe F-Host in Codesys ^{CODESYS Forge talk (Post)}
Interested. I can see the EL6633 Profinet Controller can be added in Codesys to the EK1914 or EK1100, and then ProfiSafe devices can be added as the F-DI8/F-DQ3 ET200eco PN. Im unsure how to configure the telegram to the EL6910. Have you been able to make this configuration? EL6910 Manual shows a way but only using TwinSafe.
Last updated: 2025-10-23

Post by timvh on Persistent Retain Variables Not Visible in Online View (WAGO PFC100 + CODESYS) ^{CODESYS Forge talk (Post)}
It is a known issue. It only happens with CODESYS and Wago controllers and the Persistent Variables. It seems related to using 64 bit variables in the PV list (e.g. LREAL). Internally in the PLC everything works okay. It is just a monitoring issue.
Last updated: 2025-10-26

Post by aniket-b on Scara3 kinematic robot error ^{CODESYS Forge talk (Post)}
Here I have attached the task monitor data. What is very weird is that I am using MC__MoveDirectAbsolute FB, when I choose Vel/ACC/Jerk Factor to 1.0 it run fine. It ran 10 hours without the issue. But I get the error randomly when I use factor as 0.5
Last updated: 2025-12-29

Post by gatto on warning C0195 ^{CODESYS Forge talk (Post)}
Good morning dear codesys users. I'm using 3.5.20.40 and I get this warning C0195 when I assign an initial value to xyz. However, if I do it on a single byte (abc), it doesn't display any warning. Why? VAR_GLOBAL abc : BYTE := 100 ; xyz : ARRAY [1..10] OF BYTE := [10(100)] ; END_VAR
Last updated: 2025-11-20

Post by fabrp on CPU + EtherCAT redundancy ^{CODESYS Forge talk (Post)}
Hi TimvH, thanks for feedback. I also test the redundancy with Wago PFC 8212 but when I did it (firmware 28) it was not so much stable..Did you have some issue on master/slave switchover? are you using with EtherCAT remote I/O? I was looking for a most powerful hardware (PC based, x64) BR
Last updated: 2026-02-01

Post by mrkm-dic on CODESYS: Combining Master Redundancy with EtherCAT Ring Topology – Is it Supported? ^{CODESYS Forge talk (Post)}
Hi! thanks for reply. We tested the configuration you proposed as well; however, when the cable between the controller and the switch was disconnected, the Active and Standby roles were swapped. Did you observe the same behavior in your configuration using WAGO and Beckhoff?
Last updated: 3 days ago

Post by trusty-squire on Confused by dwIpoTime input for SMC_Interpolator ^{CODESYS Forge talk (Post)}
Hi, Learning Codesys CNC, and I am confused by the dwIpoTime parameter. I have a basic demo application, using SMC_Interpolator feeding into SMC_TRAFO_Gantry2Tool2, which then sets the position of the x/y SM_Drive_Virtual axis. I also have a C axis which revolves the tool, which is controlled using a simple tangential angle calculation SMC_CalcDirectionFromVector. The GCode I'm using has feed/accel set at 500. The axis configuration limits are well above that (2000). What's strange is that, when I run the simulation, the feed speed changes drastically when I update the variable dwIpoTime. The larger the number, the faster it moves. What's going on here? The documentation only says "This variable has to be set for each call. It represents the cycle time in μsec." Why does it change the feed speed I'm seeing the in simulation? What is a good number to use? The example I was looking at set it at 5000. Screenshot attached.
Last updated: 2024-07-18

Sort by relevance or date