Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
Hello, i want to connect my automation server and i follow the steps as desribed in the video series(https://www.youtube.com/watch?v=iiPKyyO4M00&list=PLaws15OZmd7Uu2W23zX2w424aI3TrOfHf) and also that guide (https://content.helpme-codesys.com/en/CODESYS%20Automation%20Server/_cas_add_plc_to_server.html). When i go to "Allow Edge Gateway configuration.." from the Codesys gateway Systray running i get the message in the attached picture, so i open the Gateway.cgf but the file doesn't contain an cmpedgegateway section as mentioned in the message. I have installed all the latest versions codesys and of the components mentioned in the guides. How can i solve that problem?
Last updated: 2024-10-21

Post by martincapd on EWON ^{CODESYS Forge talk (Post)}
I have the same problem in that I can connect to the eWon and ping the controller IP Address, however I cant connect through CodeSys. I'm using Gateway-1 which is configured to use "IP-Address: localhost" and "Port: 1217". Rather than scanning the network for devices, I enter the IP Address of the device, codesys returns a "No Device is repsonding..." message. See attached. I'm wondering if the IP-Address used Gateway-1 should be "localhost" or the WAN/LAN IP of the eWon? Thanks for the help MC
Last updated: 2024-02-21

Post by dileesha on Codesys device configuration ^{CODESYS Forge talk (Post)}
I am new to this and I have a Beijer X2 Control 7 HMI and in my laptop I have installed codesys v3.5, ix developer and codesys gateway control. I have designed a simple PLC programme and Im trying to connect my PC and Beijer HMI via an ethernet cable and scanit in the codesys software. But when I scan it does not show any device.
Last updated: 2023-12-08

Post by transmin01 on CANbus issue ^{CODESYS Forge talk (Post)}
Hi, I have been trying to get a CANbus device working with Codesys 3.5SP19 patch1 via a Beckhoff EL6751 gateway without success. I have the CANOpen_Manager and CANopen device configured but this will not run. Is there any code required to kickstart the CANbus comms into action? Regards Trevor
Last updated: 2023-09-13

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
check 'uname -a' by ssh connection - addtional you'll probaly find the reason for not running with application by 'cat /var/opt/codesys/codesyscontrol.log' incase you are using 4.9.0.0 runtime version
Last updated: 2023-09-13

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
Thanks very much for the explanation. I am basically new to the rpi world, but somewhat familiar with the indraworks/CtrlX versions of codesys. Appreciate your help.
Last updated: 2023-09-13

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
ok now it is clear - this is a single core Pi Zero W. For this device there is no edge device available. But just for working with CODESYS it is not really needed and yes plc runs only for 2h unlicensed.
Last updated: 2023-09-13

Post by fransh on WAGO PFC200 FW25 unable to connect ^{CODESYS Forge talk (Post)}
Hi I set up my WAGO PFC200 controller and am unable to connect to the processor. Gateway is set to local host. I can connect to the unit with the WAGO Web Based management but not with Codesys V3.5 SP18.5. Any suggestion?
Last updated: 2023-12-09

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello Edwin, I sent the info through CODESYS store my question, as I was afraid that I could be exposing sensitive information here in the forum. Thank you very much!
Last updated: 2024-01-10

Post by plumper on License problem gateway ^{CODESYS Forge talk (Post)}
I have the same problem. Obtained new license without success. Codesys 3.5 SP 16, soft container. I would be grateful for quick help as we have to deliver equipment. Best regards
Last updated: 2024-04-16

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
By browser is not working. Tim suggestet to use Codesys and stick in the laptop. Thats working. But now with a stick with licence but no running motion.
Last updated: 2024-04-25

Post by eschwellinger on Using the Wago 750-658 CAN Gateway ^{CODESYS Forge talk (Post)}
I would ask the Wago Support - they have a CODESYS V3 runtime (not eCOCKPIT) which probably support this? At least worth to ask them.
Last updated: 2024-07-23

Post by kirsipr on Color of empty table and table header ^{CODESYS Forge talk (Post)}
I have managed to change my dynamic visu table colors with the template for each column to dark like my rest of the webvisu background is. How ever the empty table (when not populated) and the table header stays white / gray. Is there same way to modify the colors of header and empty table?
Last updated: 2024-03-13

Post by tortillamarcal on TargetVisu Freezing ^{CODESYS Forge talk (Post)}
Hi, I have project that worked during months. This one have targetvisu where I move between screens with a frame using the function flick/slide. The last weeks when i move sliding the screen freeze but the comutation tag of the frame continue registration the movements. The program continue working at the background but the screen freeze. Has anyone encountered something similar? Thanks!
Last updated: 2024-09-12

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
Hello all, First post. I recently acquired an RPI zero W from amazon, and have been using it with Codesys v3.5 SP19 patch 2. I first got it working yesterday, and after installing the runtime on the Pi, I was prompted to install the edge gateway. Installation of the edge gateway failed because of unsupported architecture, undeterred I was able to connect to the pi and program as I wanted. The issue I've noticed is that if I do not load anything to the pi overnight, I can then no longer connect to the pi and download, although I can still ping it from my pc. I found that if I power cycle the PI, I am then able to connect again, and it works as normal. I did some googling and found instances where people recommended downloading the newest edge gateway, which brings me here. Wondering if there are any suggestions, or if this is a known issue. I actually tried installing all 3 versions of edge gateway for science, but all fail with the same message. Thanks -Dan
Last updated: 2023-09-13

Post by janber0206 on Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Post)}
Solved EN: The Problem is that the Codesys Edge-Gateways have a License with a runtime of an half year, as long the Gateways are online they will self renew themselfs. In my Case the RevPi was more than a year offline and so the Edge-Gateway was not working anymore. The solution: I accessed a laptop that was directly connected to the RevPi. I installed the Codesys service tool and renewed the certificate manual. DE: Das Propblem ist das die Codesys Edge-Gatways eine Lizenz haben die nur ein halbes Jahr gültig ist. Solange das Gateway eine Internet verbindung hat aktualisiert sich das Zertifikat von alleine. In meinem Fall war das Gateway aber über ein Jahr offline und hat somit nicht mehr funktioniert. Die Lösung: Ich hab auf einen Laptop von Kunden mit TeamViewer zugegriffen, der Laptop wurde mit Kabel direkt mit RevPi verbunden. Codesys Service Tool installiert und dann das Gatewayzertifikat aktualisiert.
Last updated: 2023-10-26

Post by winki on Scan Network on gateway created with Control Sl ^{CODESYS Forge talk (Post)}
Hello, I am new on CODESYS environement. I am used to BECKHOFF env. I would like to use codesys on debian distribution. I followed this tutorial : https://www.youtube.com/watch?v=TVF0LV279_4 But I am stuck on selected the device. I do not understand, everything is running correctly Someone have an idea ? Loic
Last updated: 2024-10-16

Post by eschwellinger on Scan Network on gateway created with Control Sl ^{CODESYS Forge talk (Post)}
it seems that the device you scan, is not the same type which you have added to the project in CODESYS. Virtual Control is Arm 64 SL so please select this type in CODESYS when you generate a new Application..or right click to the device- update device - virtual Control Arm 64 SL
Last updated: 2024-10-16

Post by fugtwad on Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected ^{CODESYS Forge talk (Post)}
Scan from "IP-Configuration" with PC connected to first EtherCAT slave and "EtherCAT" tick box ticked gives slave info. As does ticking the "Emergency" tickbox.
Last updated: 2024-05-20

Post by jens on Using the Wago 750-658 CAN Gateway ^{CODESYS Forge talk (Post)}
Is there any solution for this ? or do you need to use wago runtime and use the function blocks for the CanOpen ?
Last updated: 2024-07-23

Post by yannickasselin on ControlWin 3.5.20.30 Issues ^{CODESYS Forge talk (Post)}
Hello, Trying to install ControlWin 3.5.20.30 on Windows 10 Enterprise 2016 LTSB and I always get this error about the gateway. 3.5.20.20 is working fine. Any ideas why? Thank you
Last updated: 2024-09-26

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
sure on each installation this random number is generated so you need to ckeck which one is the right one to modify
Last updated: 2024-10-21

Post by eschwellinger on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
we need some logfiles from the edge gateway /etc/Gateway.cfg [CmpLog] CmpEdgeGateway.Filter=0xFFFFFFFF Logger.0.Name=/tmp/codesysedge.log Logger.0.Filter=0x0000000F Logger.0.Enable=1 Logger.0.MaxEntries=100000 Logger.0.MaxFileSize=5000000 Logger.0.MaxFiles=1 Logger.0.Backend.0.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Type=0x314 ;Set the timestamp to RTC and does the scan via Automation Server show the plc?
Last updated: 2024-01-09

Post by jrsantab on Remote connection to ifm PLC & HMI ^{CODESYS Forge talk (Post)}
We have finally solved the problem. The version of the Gateway in the computer that worked (3.5.11.0) and the one that didn't (3.5.17.30) was different. We have three different Codesys 3.5 versions installed because we work with different controllers. I believe that, depending on the sequence you follow to install the versions you get a different Gateway version. To solve the problem you first have to disable the "obsolete" services. Open services, serach for (in our case) CODESYS Gateway V3 Version 3.5.11.0 CODESYS ServiceControl Version 3.5.11.0 I stopped the services and changed to Manual Start. Then you have to create the new services. In our case, from a Command Prompt session (cmd): SC CREATE "Codesys GatewayService Rigual" binpath="C:\Program Files\CODESYS 3.5.17.30\GatewayPLC\GatewayService.exe" and then SC CREATE "CODESYS ServiceControl Version 3.5.17.30" binpath="C:\Program Files\CODESYS 3.5.17.30\GatewayPLC\CODESYSControlService.exe" remember also to set them as Automatic Start!
Last updated: 2024-04-22

Post by yannickasselin on Connect to remote PLC via local pc and teamviewer ^{CODESYS Forge talk (Post)}
Yes it is possible. I did it a lot of times using TeamViewer VPN. Unfortunately, TeamViewer VPN only works on Windows. If the remote PLC is a Codesys runtime running on Windows, you should be able to login directly using TeamViewer VPN if it is installed on the PC/PLC. If it is not Windows based, you can still do it but you need to have a Windows based PC acting as a gateway in the middle. In this case you need to enable IP Forwarding on the Windows remote PC (the gateway) and you need to setup the gateway IP address on the PLC to be the address of the Windows PC. Then you need to add a route on your local PC to point to the gateway PC for Codesys communication. I know it may not be detailed enough but I did not want to make a whole tutorial on how to do it. Bottom line, it is possible. I do it all the time.
Last updated: 2024-02-02

Sort by relevance or date