How to implement an interface (IElement)? ^{CODESYS Forge talk (Thread)}
How to implement an interface (IElement)?
Last updated: 2024-07-22

Post by timvh on Array to String ^{CODESYS Forge talk (Post)}
The new (UTF8) string library is faster and can handle large strings. https://content.helpme-codesys.com/en/CODESYS%20String%20Libraries/_strlib_start_page.html PS, in CODESYS, the maximum string length is not 255 characters. The String functions of the standard library are limited to strings of 255 characters. But you can use other (memory) functions to handle strings larger than 255 characters.
Last updated: 2024-07-22

Post by trusty-squire on Confused by dwIpoTime input for SMC_Interpolator ^{CODESYS Forge talk (Post)}
OK, that makes sense. Because the FB is provided a specific interval period, it would change the target position accordingly based on the time it "thought" elapsed. If it has the wrong interval provided, it updates the target positions every cycle incorrectly so the axes will end up moving faster or slower. Thanks!
Last updated: 2024-07-22

Script python for write in a file Project information ^{CODESYS Forge talk (Thread)}
Script python for write in a file Project information
Last updated: 2024-07-23

Script python for write in a file Project information ^{CODESYS Forge talk (Thread)}
Script python for write in a file Project information
Last updated: 2024-07-23

Confused by dwIpoTime input for SMC_Interpolator ^{CODESYS Forge talk (Thread)}
Confused by dwIpoTime input for SMC_Interpolator
Last updated: 2024-07-22

Post by jens on Using the Wago 750-658 CAN Gateway ^{CODESYS Forge talk (Post)}
Is there any solution for this ? or do you need to use wago runtime and use the function blocks for the CanOpen ?
Last updated: 2024-07-23

Post by mmpl on Array to String ^{CODESYS Forge talk (Post)}
Hi Thank you for you reply. Yes I can concatenat longer string. I am using string_Util_Intern libraray for concat. The issue is abot plc performance. It takes 7 second. I am looking to improve time.
Last updated: 2024-07-23

Post by eschwellinger on Using the Wago 750-658 CAN Gateway ^{CODESYS Forge talk (Post)}
I would ask the Wago Support - they have a CODESYS V3 runtime (not eCOCKPIT) which probably support this? At least worth to ask them.
Last updated: 2024-07-23

Using the Wago 750-658 CAN Gateway ^{CODESYS Forge talk (Thread)}
Using the Wago 750-658 CAN Gateway
Last updated: 2024-07-23

Post by toffeebonbon on EL7041-0052 - does it run with EL7041 SoftMotion? ^{CODESYS Forge talk (Post)}
I let this project rest for a while and picked it up last week. I have been in contact with the support from beckhoff and got the information that the terminals were identical (communication wise). As the Log of the Axis (not the drive's log) shows the error when trying to write into the register 0x8012 and set the value for an encoder to a value that is the default - at least according to the manual - I was wondering if it is possible to "not write that value" to skip that part? Or am I misunderstanding the way the library communicates with the drive?
Last updated: 2024-07-24

Post by tobim on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
Hi viktorr, unfortunately not. Good luck to you!
Last updated: 2024-07-24

IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Thread)}
IP-Change not alloed on this adapter ! PN-Device will operate with limitations.
Last updated: 2024-07-24

EL7041-0052 - does it run with EL7041 SoftMotion? ^{CODESYS Forge talk (Thread)}
EL7041-0052 - does it run with EL7041 SoftMotion?
Last updated: 2024-07-24

Array to String ^{CODESYS Forge talk (Thread)}
Array to String
Last updated: 2024-07-24

Post by timvh on Array to String ^{CODESYS Forge talk (Post)}
The string_Util_Intern is not the library I referred to. With a CONCAT function (also with the string util library) a search is done for the NULL character. If you concatenate 20000 characters to one string, then the longer the string, the longer it takes to find this NULL character.
Last updated: 2024-07-24

Post by viktorr on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
Hi i know this is a bit of a long shot but did you ever find a solution to this? Running into similar issues...
Last updated: 2024-07-24

Post by marks on Regarding trend storage access error ^{CODESYS Forge talk (Post)}
I had this problem when running the application as a Simulation. When I wrote it to the Pi all worked as expected. If this isn't the case for you, we've seen some issues with sqlite on the Pi's - so reset Origin and re-download may help in that case. Good luck, Mark
Last updated: 2024-07-24

Post by mubeta on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Thank you for your interest. Your answers are in line with what I knew, so at least it comforts me that I did not misinterpret the situation. However, I don't have an exact match as, for this project over the past few days I have: 1) I have gone back to leaving the various FBs of the motion always called, all of them, and in the state machine I use a boolean to activate the various useful Execute. (But in the future I want to go back and try the programming technique with which I wanted to develop this project); 2) For the occasional error: SMC_FB_WASNT_CALLED_DURING_MOTION perhaps it was due to the fact that I had set the Ethercat bus synchronism only at the CAN master level, but not at the level of individual drives. I have now also activated it for the individual drives and it does indeed seem to have been resolved, but having also adopted the programming technique mentioned in point 1), I cannot say whether this was the solution to the problem, or instead the previous point. Is there an error ‘regulator or start not set’ in the device log before the error ‘motion generating FB wasn't called for at least one cycle’? I can't answer that right now. By now the machine is running and I am no longer there, at this one. Also, I seem to remember that the 'fbeFBerror' drive structure (5-element array), does not cycle, BUT ONCE THE 5 EVENTS AFTER SWITCHING ON, IT DOES NOT UPDATE ANYMORE (but that's another issue), so diagnostics were not easy.
Last updated: 2024-07-24

Reset problem with CMZ SD/SVM drive ^{CODESYS Forge talk (Thread)}
Reset problem with CMZ SD/SVM drive
Last updated: 2024-07-24

Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Thread)}
Some 'pathetic' errors in SoftMotion program
Last updated: 2024-07-24

Regarding trend storage access error ^{CODESYS Forge talk (Thread)}
Regarding trend storage access error
Last updated: 2024-07-24

Post by mubeta on Reset problem with CMZ SD/SVM drive ^{CODESYS Forge talk (Post)}
In a recent project with SoftMotion 4.15.0.0, where I integrated two SD drives from CMZ (from catalogue EDS and not imported), on CANopen bus, I found that the SoftMotion MC_Reset function does not reset the drive faults. Even if the drive is in fault, either on the device or on the drive at the CoDeSys level, the function does not reset, instead reporting the error code: no error to reset. Finally, I had to connect the reset bit of the ControlWord directly to a tag in my program. Something I never had to do on other drives: Lexium, etc. all reset simply with MC_Reset.
Last updated: 2024-07-24

Post by biiebs on Aufbau von Ablaufsteuerungen ermitteln ^{CODESYS Forge talk (Post)}
Hallo Zusammen, gibt es in CODESYS bei Ablaufsteuerungen weitere Möglichkeiten außer den AS-Einstellungen z.B. die Aufbaustruktur der Ablaufsteuerung herauszufinden? Gesamtanzahl der verwendeten Aktionen / Schritte - Im besten Fall auch die einzelnen Verzweigungen? Ich würde den gesamten Aufbau der Schrittkette gerne als "View" in einer übergeordneten Software abbilden lassen, da sich die Ablaufsteuerungen, je nach Projekt im Aufbau unterscheiden bräuchte ich die Kenntniss über den Aufbau dieser Schrittketten. Oder müsste ich mir hier einen "Workaround" programmieren, der z.B. bei Init erstmal den Aufbau der Ablaufsteuerung durchläuft und mir die nötigen Informationen liefert? Natürlich wäre auch ein Weg den Aufbau des AS-Bausteins über die PLCopen XML zu exportieren, jedoch müsste dies bei Änderungen jeweils nachgezogen werden - was etwas unschön wäre, falls dies vergessen würde. Mittlerweile habe ich auch das Tool "SFC Visu Generator" gefunden, dessen Funktion im Prinzip genau das darstellt, was ich benötige - jedoch leider nur als CODESYS interne Visualisierung. Ich würde den Export des Bausteins gerne in meine übergeordnete Software implementieren. Gibt es hier die Möglichkeit das Vorgehen zu Erfahren oder den vom Baustein generierten Export bei mir zu implementieren? Hat hier jemand sowas ähnliches schonmal gelöst? Vielen Dank im Voraus Mit freundlichen Grüßen Biiebs
Last updated: 2024-07-25

Aufbau von Ablaufsteuerungen ermitteln ^{CODESYS Forge talk (Thread)}
Aufbau von Ablaufsteuerungen ermitteln
Last updated: 2024-07-25

Sort by relevance or date