Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
tested the servo with the SML_Drive_CAN_Generetic402 driver. Works. SM_Drive_Generetic402 does not work with the driver. How can signals be reassigned?
Last updated: 2024-03-17

Post by fenicklar on Login problem with FileTransfer on Raspberry Pi 5 ^{CODESYS Forge talk (Post)}
Hello everyone, I'm currently trying to set up a FileTransfer function from a Webvisu to my Raspberry Pi 5 on Codesys 3.5 SP 19 Patch 6. I went in the files CODESYSControl.cfg and CODESYSControl_User.cfg and added : [CmpWebServerHandlerV3] AllowFileTransferServices=1 And it seems to be working. However, I cannot access my several Webvisu without putting my login. That's a problem because one of my webvisu is in kiosk mode on the raspberry itself and there is nokeyboard attached, it's just an information screen, but I can't view it. Is there a wey to enable the File Transfer without requiring to login ? Thank you for your time
Last updated: 2024-03-18

Post by eschwellinger on Raspberry PI4 Serial Port ^{CODESYS Forge talk (Post)}
no parameter seems ok but RS485 does only work with CODESYS if the send/receive is determined by hardware as I remember correct
Last updated: 2024-03-18

Post by eschwellinger on Problems with simulation in Window 10 ^{CODESYS Forge talk (Post)}
I would give a try to check the content here: c:\ProgramData\CODESYS\CODESYSControlWinV3x64
Last updated: 2024-03-18

Post by eschwellinger on Zielsystem stimmt nicht mit dem verbundenen Gerät überein ^{CODESYS Forge talk (Post)}
das Projektarchiv anhängen oder an "meine Frage" im CODESYS Store schicken..
Last updated: 2024-03-18

Post by eschwellinger on Raspberry PI4 Serial Port ^{CODESYS Forge talk (Post)}
no config file is ok, the feedback is: your hardware must support this send/receive switching
Last updated: 2024-03-19

Post by eschwellinger on PFC100 Licensing fails ^{CODESYS Forge talk (Post)}
possible to use a newer version? maybe it is /var/opt/codesys/cmact_license in your version
Last updated: 2024-03-19

Post by kevinrn on CODESYS Installer CLI - commands syntax description ^{CODESYS Forge talk (Post)}
I'm also looking for some help here. Explicit for the --searchCriteria parameter.
Last updated: 2024-03-20

Post by kevinrn on CODESYS Installer CLI - commands syntax description ^{CODESYS Forge talk (Post)}
I'm also looking for some help here. Explicit for the --searchCriteria parameter.
Last updated: 2024-03-20

Post by superjojo2002 on Licensing info not available. ^{CODESYS Forge talk (Post)}
If support for a containerized CODESYS runtime with a license isn't feasible, then I've considered an alternative approach: I've purchased and activated a "CODESYS Control Basic S" license on my Windows notebook, where I already have the Codemeter Control Center installed. Upon activation, I can see the CODESYS license as active on my notebook. Subsequently, I followed the instructions provided in this link (https://faq.codesys.com/display/CDSFAQ/How+to%3A+Setup+a+Wibu+Network+Server+Access+for+Licenses) to configure the Wibu runtime in the CODESYS container to access my external license server hosted on my notebook by editing the CODESYSControl_User.cfg file accordingly. However, it's worth noting that I'm still receiving a response from the Licensing Manager indicating that the runtime is persistently searching for a dongle instead of recognizing the soft container. So how can I get my runtime licensed now? Any ideas?
Last updated: 2024-03-20

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
Currently the CODESYS Control Basic S license is not a network license but it should be, so I guess it doesn't work yet
Last updated: 2024-03-20

Post by esave on Stepper Drive with Ethercat ^{CODESYS Forge talk (Post)}
The stepper supports CiA402 maybe I can use a CiA402 library to controll the stepper motor. Has anybody experience with that?
Last updated: 2024-03-21

Post by kleeswi on Lizenz Reinstallieren ^{CODESYS Forge talk (Post)}
Hier unser Vorgehen und die Fehlermeldung. Die ausgewählte Lizenz wurde früher auf dem gleicher Raspberry pi installiert und sollte sich daher wieder aktivieren lassen!
Last updated: 2024-03-21

Post by kevinrn on Licensing info not available. ^{CODESYS Forge talk (Post)}
I'm facing a similar issue. @eschwellinger, can you also send me a preliminary version? Thank you in advance.
Last updated: 2024-03-21

Post by tomast on Siemens V20 Frequenzumrichter über Modbus RTU ^{CODESYS Forge talk (Post)}
Hi Tim, Have you sorted out your problem because i have also problems with i?
Last updated: 2024-03-21

Post by smartcoco on Release SP20 - Changes in behaviour? ^{CODESYS Forge talk (Post)}
You should use this method: VAR NULL:REFERENCE TO FB_MSG END_VAR Add_EVT_OUT REF= NULL;
Last updated: 2024-03-25

Post by hock714 on How to catch save button event ^{CODESYS Forge talk (Post)}
I want to catch the event whenever save button being click in C#.
Last updated: 2024-03-25

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, I want to activate a license. But got an error. This gateway endpoint is inactive
Last updated: 2024-03-27

Post by reinier-geers on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, I want to activate a license. But got an error. This gateway endpoint is inactive
Last updated: 2024-03-27

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
as a workaround just plug your USB key to the CODESYS PC - and activate the ticket by the browser license.codesys.com
Last updated: 2024-03-27

Post by kevinrn on Github Actions CI/CD tasks - development topic ^{CODESYS Forge talk (Post)}
@eschwellinger can this be moved to the engineering section (forum) ?
Last updated: 2024-03-28

Post by markosrod on License problem gateway ^{CODESYS Forge talk (Post)}
i have the same error with when i try to validate de license of the libraries. can you help me?
Last updated: 2024-04-02

Post by egau on Git - User identification data is lost when codesys is closed ^{CODESYS Forge talk (Post)}
It bothers me for sure.
Last updated: 2024-04-04

Post by vincentd on Datasource OPC UA Client error ID:7012 ^{CODESYS Forge talk (Post)}
the target is the codesys software executing the PLC code like ladder / instruction list etc...
Last updated: 2024-04-05

Post by rajshaswat on OPC-UA and other communication questions ^{CODESYS Forge talk (Post)}
check this if it helps : https://youtu.be/Hdpbsp2jG3Q?si=NTwK13c_YOSZXM3v
Last updated: 2024-04-06

Sort by relevance or date