Post by alex-at-xana on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
Hi Everyone, For a fast monitoring system I am using Ethercat oversampling and timestamping inputs. As the customers has a lot of different configurations out in the field, we went for a dynamic Ethercat configuration. Already got the whole detection chain working but now I am stuck since two days in debugging the configuration. Here are my quesitons: I extended the dynamic config example for the EL3632 16#0E303052: //EL3632 pSlave^.SetDCSettings(TRUE,TRUE,80,80,TRUE,4000,0,0); pSlave^.AddSyncManager(16#1000,128,16#26,TRUE,3); pSlave^.AddSyncManager(16#1080,128,16#22,TRUE,2); pSlave^.AddSyncManager(16#1100,0,16#4,TRUE,1); pSlave^.AddSyncManager(16#1110,214,16#20,TRUE,0); pSlave^.AddFMMU(0,214,0,7,16#1110,0,1,1); pSlave^.AddFMMU(0,1,0,0,16#80D,0,1,1); xKnown := TRUE; This leads to a PLL Error for these devices. I double and triple checked the configuraton, but cannot find the issue. There seems to be one difference: the config dialog creates a startup parameter: 16#10F3:16#05, Name: Command_0, Value:0. Bitlen: 16, Stop on fault: false, jumpt at fault: false: next line: 0 a) I do not find information on how to set this in my code. Can you help me there? b) Without trying to set the value, I get a PLL error for these devices in the master log. Is the config wrong? c) Do I need to set the Master to Autoconfigure or Manual? I used autoconfigure for my tests. The stack creates input data addresses for the slaves input data range (pSlaves[i].InputData) which are different from those created when I use the Engineering tools dialogs to configure Ethercat. Specifically, the addresses seem to be aligned at 16 byte boundaries when they are created using the engineering tool, but may appear at uneven addresses when I use the script in dynamic config. I did not try to access ULINT at uneven addresses yet, but I am suspecting this may be a problem. Do I need to manually align the addresses ? Any help is appreciated...
Last updated: 2024-09-10

Post by alex-at-xana on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
Ah - forgot another question as it may be related to the PLL problem: I am executing a 4ms cycle. I do not call (from what I know) the Ethercat_MAster periodically in my program. The bus cycle task is set to the Ethercat task. I would assume that the master should send 250 frames per second. Yet, the status of the master says it transmits 500 frames per second which would indicate that the master is called twice. Any ideas there?
Last updated: 2024-09-10

Persistent variables not working for Control Win ^{CODESYS Forge talk (Thread)}
Persistent variables not working for Control Win
Last updated: 2024-09-10

Persistent / Programme change ^{CODESYS Forge talk (Thread)}
Persistent / Programme change
Last updated: 2024-09-10

Post by talhaali on Persistent variables not working for Control Win ^{CODESYS Forge talk (Post)}
Hi everyone, I am facing issues with persistent retain variables. It was working fine. I added a few new Persistent variables and it stopped working. If I do cold reset it holds persistent variable values. But when I close control win gracefully, and opens it again then it does not. Even, it is not saving ret file in application.
Last updated: 2024-09-10

Post by bruceae on Ethernet/IP Scan ^{CODESYS Forge talk (Post)}
Hello, I have a robot configured as a Generic Ethernet Module under Ethernet/IP Scanner. I can not see the change of state of the outputs coming from the robot on the codesys side in real-time. (The robot has it's own internal program that would changes the values of remote outputs 0-3 off and on). Also when I send data down to the inputs of the robot it doesn't transfer over as expected. As an example I'll send to the robot's input bit 0 a value of 1. It doesn't see that value change. However, when I write that input bit 0 back to a value of 0, the robot changes state and shows a value of 1. And if I change the state of a different bit, the other bits update properly, except for the bit that I changed. Any advice would be greatly appreciated, and if anything else is needed let me know.
Last updated: 2024-09-10

Post by talhaali on Persistent variables lost ^{CODESYS Forge talk (Post)}
Hi, did you get any solution. I am facing similar problem. I lost all the values
Last updated: 2024-09-10

Post by talhaali on Persistent / Programme change ^{CODESYS Forge talk (Post)}
Hi, did you get any solution for this.
Last updated: 2024-09-10

Ethernet/IP Scan ^{CODESYS Forge talk (Thread)}
Ethernet/IP Scan
Last updated: 2024-09-10

Post by esmith on OPTO22 Groov Epic PR2 Modbus Comms Dropping out every 2 hours and 4 Mins ^{CODESYS Forge talk (Post)}
I think I am having a similar issue. Have you found out what was causing this problem?
Last updated: 2024-09-10

Post by joelwright24 on codesys sp20 opcua not working ^{CODESYS Forge talk (Post)}
I also had this problem connected CODESYS to UAExpert for the first time. In the device, I need to allow anonyomous log in. Follow steps 14 - 17 of the following tutorial: https://docs.factoryio.com/tutorials/codesys/setting-up/codesys-opc-ua-sp17/#creating-the-project
Last updated: 2024-09-11

Post by anoori on Setting up Raspberry pi as an Opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Post)}
I am trying to set up my Raspberry Pi as an OPC UA server and use UaExpert on my Pc as the OPC UA client.However, Im encountering some certificate-related errors in UaExpert: 1.Unable to get local issuer certificate. 2. Unable to get certificate CRL. 3. Unable to verify the first certificate.
Last updated: 2024-09-11

setting up Raspberry pi as an opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Thread)}
setting up Raspberry pi as an opc ua Server with UaExpert as Client
Last updated: 2024-09-11

Post by anoori on setting up Raspberry pi as an opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Post)}
I am trying to set up my Raspberry Pi as an OPC UA server and use UaExpert on my Pc as the OPC UA client.However, Im encountering some certificate-related errors in UaExpert: 1.Unable to get local issuer certificate. 2. Unable to get certificate CRL. 3. Unable to verify the first certificate.
Last updated: 2024-09-11

Setting up Raspberry pi as an Opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Thread)}
Setting up Raspberry pi as an Opc ua Server with UaExpert as Client
Last updated: 2024-09-11

"Scan Network" doesn't find CR1140 device (ifm) ^{CODESYS Forge talk (Thread)}
"Scan Network" doesn't find CR1140 device (ifm)
Last updated: 2024-09-11

Post by trprsmn on "Scan Network" doesn't find CR1140 device (ifm) ^{CODESYS Forge talk (Post)}
Hi, I'm watching an ifm tutorial on how to setup an industrial controller in CODESYS. I'm using an 'ecomatDisplay43inch_64bit) controller. CODESYS Gateway and PLC are both runngin (systray). However if I click "Scan Network" I can't find my controller. The only thing it finds is a "desktop" it seems (I'm using a Windows 10 on a Mac Book using VMWare, so maybe it has something to do with that?). How can I fix this? Thanks in advance!
Last updated: 2024-09-11

Post by mostafa-beshr on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on implementing continuous movement in Codesys, but I've run into some trouble. I've tried using ALL SM3 Basic and SML without success. I’m specifically looking for a library that supports continuous updates and can fetch values from a server in real time. Does anyone know of a library or approach that fits these requirements? Any advice or suggestions would be greatly appreciated! i read plcopen documentaion as well as codesys Thank you!
Last updated: 2024-09-11

implementing continuous movement in Codesys ^{CODESYS Forge talk (Thread)}
implementing continuous movement in Codesys
Last updated: 2024-09-11

Post by mostafa-beshr on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on implementing continuous movement in Codesys, but I've run into some trouble. I've tried using ALL SM3 Basic and SML without success. I’m specifically looking for a library that supports continuous updates and can fetch values from a server in real time. Does anyone know of a library or approach that fits these requirements? Any advice or suggestions would be greatly appreciated! i read plcopen documentaion as well as codesys Thank you!
Last updated: 2024-09-11

Post by mostafa-beshr on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on implementing continuous movement in Codesys, but I've run into some trouble. I've tried using ALL SM3 Basic and SML without success. I’m specifically looking for a library that supports continuous updates and can fetch values from a server in real time. Does anyone know of a library or approach that fits these requirements? Any advice or suggestions would be greatly appreciated! i read plcopen documentaion as well as codesys Thank you!
Last updated: 2024-09-11

implementing continuous movement in Codesys ^{CODESYS Forge talk (Thread)}
implementing continuous movement in Codesys
Last updated: 2024-09-11

Post by lyngaansns on .project.~u save frequency ^{CODESYS Forge talk (Post)}
It would be such a simple fix to first check if the file is missing or changed before writing to it, onedrive only has a problem because codesys writes to the file every second no matter the change.
Last updated: 2024-09-11

OPTO22 Groov Epic PR2 Modbus Comms Dropping out every 2 hours and 4 Mins ^{CODESYS Forge talk (Thread)}
OPTO22 Groov Epic PR2 Modbus Comms Dropping out every 2 hours and 4 Mins
Last updated: 2024-09-11

.project.~u save frequency ^{CODESYS Forge talk (Thread)}
.project.~u save frequency
Last updated: 2024-09-11

Sort by relevance or date