Post by davidf on Error trying to activate the demo Git licence ^{CODESYS Forge talk (Post)}
Same error with the other professional demo licences
Last updated: 2024-10-11

Post by robinluckey on IDE window handling bugs, windows diasppear, multi monitor setups ^{CODESYS Forge talk (Post)}
Codesys Windows (Main window as well as pop-ups) often appear outside of the viewable are in Windows when using multiple Monitors. This is exacerbated (happens more very often), when working on a notebook with different Monitor setups at different locations (which kind of is standard nowadays). The windows (not even the main Window) can not be recovered using standard short cuts like WIN + Arrow keys, alt + tab etc. The only way we found to recover the windows is by changing the Monitor positions in thew Windows Display Settings and than changing them back EVERY TIME a pop us is displayed. This makes using Codesys close to unbearable. All my colleagues face the same problem and do not have this problem with any other IDE. Please help.
Last updated: 2024-10-11

Post by irshad on Bought a license, but can't activate ^{CODESYS Forge talk (Post)}
Hi, Am having the same issue.. Charge ID ch_3Q8iRXJ3NuAV8W161ZdlLsBm
Last updated: 2024-10-11

Post by eschwellinger on Persistent variables are not read after initialization ^{CODESYS Forge talk (Post)}
no need to activate application composer. It is part of the licensefree part.
Last updated: 2024-10-11

Post by tobthi on Ethernet/IP Connection -> Nicht aktualisiert(Tooltip prüfen) ^{CODESYS Forge talk (Post)}
vielen Danke für die Antwort, wie mache ich das?
Last updated: 2024-10-14

Post by bertoldo on Robo Scara3 ^{CODESYS Forge talk (Post)}
the interpolation block does not start from the absolute value. It returns to zero even when writing to dLastWayPosX , Y , Z.
Last updated: 2024-10-15

Post by eschwellinger on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
using Arm SL or Arm 64 SL might be an option
Last updated: 2024-10-15

Post by eschwellinger on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
start point for doing this is for sure this example here: https://content.helpme-codesys.com/en/libs/EtherCATStack/Current/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2024-10-16

Post by mini-developer on Profinet Abort AR Error ^{CODESYS Forge talk (Post)}
Hello, I have this Problem when i disconnect the PC from another ETH-Port. Did you solve the Problem?
Last updated: 2024-10-16

Post by mini-developer on Profinet Abort AR Error ^{CODESYS Forge talk (Post)}
When the PC is connected on the other ETH-Port there is no Problem.
Last updated: 2024-10-16

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Because we bought several raspberry pi licenses that can only be activated with a raspberry pi runtime.
Last updated: 2024-10-17

Is The Temu 100€ Coupon A Scam? Use Verified [acr639380] Temu Code ^{CODESYS Forge talk (Thread)}
Is The Temu 100€ Coupon A Scam? Use Verified [acr639380] Temu Code
Last updated: 2024-10-18

Lizenz ausversehen für WORKSTATION statt für GERÄT installiert - wie kann ich diese verschieben? ^{CODESYS Forge talk (Thread)}
Lizenz ausversehen für WORKSTATION statt für GERÄT installiert - wie kann ich diese verschieben?
Last updated: 2024-10-19

Post by pietrobalint on Persistent variables are not read after initialization ^{CODESYS Forge talk (Post)}
What do you mean it is part of the licensefree part? I attached my error message.
Last updated: 2024-10-20

Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Thread)}
Modbus: Is there a way to get the channel index from the channel name?
Last updated: 2024-10-21

Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
Hello, i want to connect my automation server and i follow the steps as desribed in the video series(https://www.youtube.com/watch?v=iiPKyyO4M00&list=PLaws15OZmd7Uu2W23zX2w424aI3TrOfHf) and also that guide (https://content.helpme-codesys.com/en/CODESYS%20Automation%20Server/_cas_add_plc_to_server.html). When i go to "Allow Edge Gateway configuration.." from the Codesys gateway Systray running i get the message in the attached picture, so i open the Gateway.cgf but the file doesn't contain an cmpedgegateway section as mentioned in the message. I have installed all the latest versions codesys and of the components mentioned in the guides. How can i solve that problem?
Last updated: 2024-10-21

Post by banialuk on Modbus Server TCP -error code ^{CODESYS Forge talk (Post)}
Hello, I create modbus tcp server, but I have this error: how resolve this problem?
Last updated: 2024-10-21

Post by bjarne-pagaard on OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Post)}
The Control RTE is 3.5.18.20, using the symbol configuration for exposure of variables.
Last updated: 2024-10-22

Post by taqamert on CANopen PDO Issue with Pressure Sensor in Codesys ^{CODESYS Forge talk (Post)}
Hello everyone, I am using an IFM CR0303 model PLC, which has a tilt sensor and a pressure sensor connected via CANopen. Both sensors are from the same brand (ATEK). I can read data from the tilt sensor without any issues, but I am unable to read data from the pressure sensor. I have added the EDS file in the PLC configuration and adjusted the node-ID settings. When I check with the PCAN-View application, I can see that the selected PDOs are coming through, but the data is not reaching the Codesys side. What could be the issue, and what can I try to resolve it? Can anyone help me?
Last updated: 2024-10-22

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Could you please check which EdgeGateway Version is up and running?
Last updated: 2024-10-23

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Trent, yes should work without, let me check. Regards Edwin
Last updated: 2024-10-23

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
It seems you have 2 network interfaces. Did you try eth1? Did you already configure the IP address for this interface in Linux? If yes, then maybe undo this. - or only set eth0 in the Nic configuration without anything else (so no IP address, because this is already set in Linux). For more information about the Nic settings, see (probably already read it?): https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_obj_deploy_control_sl_configuration.html PS, if you only want to run CODESYS Control SL, you don't necessarily need the Virtual PLC variant. You could also install and run the CODESYS Control SL Runtime in the Host operating system. This way you should also be able to access the serial port and directly access all ethernet ports. Maybe this is easier?
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I made a mistake it is not end0 but eth0. But I have the same error.
Last updated: 2024-10-23

Post by ben1 on Alarm Table rows font size not change ^{CODESYS Forge talk (Post)}
the alarm font settings are found in the alarm class setup
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
No, my vpn is 10.0.0.12. The docker interface is 172.17.0.1.
Last updated: 2024-10-24

Sort by relevance or date