Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I took a look at your project. First of all, a Raspbery Pi4 is installed. You must use the GPIOs_A_B(GPIOs B+/Pi2). The error ULINT can't be set to IDINT.... with your project as well. If I change your project to ‘CODESYS_Control_for_Raspberry_Pi_SL’ the error is gone.
Last updated: 2024-11-09

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
I don't have a multiplexer so it very weird that it connects with that multiplexer. If i do a I2C scan on the PI terminal, i only get the device addresses 0x48 and 0x51. One for the ADC and one for RTC. I will try again with your libraries
Last updated: 2024-11-12

Post by xabier on Kinematics Robot Delta 2 Axis ^{CODESYS Forge talk (Post)}
Hi, I have a customer and this customer design this robot...The customer need move ...I would like if Codesys has this Kinemtaics I attached photo of the robot.(this robot has 2 Axis) I have checked all kinematics has Codesys but not has the same....Someone help me Please?? Thanks XABI
Last updated: 2024-12-11

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
I continue this topic by myself, I'm very happy with the Codesys support / community ;-) This information (Download time) should be stored in the compileinfo : https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_cmd_load.html But the file is not text-readable (see attached file) so how to solve if download time is empty?
Last updated: 2024-12-19

Post by pernockham on Preferred way of managing Ip-adress/es for linux (debian) host? ^{CODESYS Forge talk (Post)}
I have a debian linux host running Control SL. I tried to manage IP-addresses through codesys/Control SL but that was not successful. What works though is manually editing the network-interfaces config file. /etc/network/interfaces. Is there a way to set this up so that IP-addresses can be managed from within codesys instead? Thanks! / Per
Last updated: 2025-01-22

Post by trusty-squire on Help with __SYSTEM.VAR_INFO ^{CODESYS Forge talk (Post)}
Not knowing exactly what you want to accomplish, you can try to use VAR_INPUT MyVar: POINTER TO BOOL; END_VAR MyVar contains the address of your referenced variable, and MyVar^ dereferences it allowing you to access the value. If this doesn't meet your needs, could you add more detail on what you are trying to accomplish?
Last updated: 2025-01-26

Post by imdatatas on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
I encountered the same problem. (Windows10 x64 single language OS). As @eschwellinger mentioned, I uninstalled the latest EdgeGateway version and installed version 3.5.20.0. Now, when I right-click and select "Allow Edge Gateway...", Config mode is activated without any error or warning window and I do not need to manually type [CmpEdgeGateway] for EdgeGateway version 3.5.20.0.
Last updated: 2025-02-04

Post by spiritcore on Server not adding PLC ^{CODESYS Forge talk (Post)}
I added new Gateway and I can see it connected. When I scan the server for PLC, it finds the PLC but when I click the Add To Server button, it shows "PLC was added." in the status. But I can't find the PLC in the list. I tried removing the gateway and re-configure everything again but it didn't solve. Any ideas?
Last updated: 2025-02-17

Post by jeffersonhui on SP20 Visualization Element Dynamic Colors ^{CODESYS Forge talk (Post)}
I am using Codesys SP20 patch 5 and in a visualization element, the "Color variables" section does not have a section to set up dynamic color values linked to variables. In a previous version (SP18), I get the option to add variables for Normal & Alarm state colors. Does anyone know how to get the dynamic color variables to work?
Last updated: 2025-02-19

Post by secundino on License ^{CODESYS Forge talk (Post)}
Good morning, I need to activate a CODESYS license on your website, as the computer where it was originally installed has been formatted. I have already sent two emails to store-support@codesys.com, but I have not received a response yet. Could you please assist me with this issue as soon as possible?
Last updated: 2025-02-20

Post by secundino on License ^{CODESYS Forge talk (Post)}
Good morning, I need to activate a CODESYS license on your website, as the computer where it was originally installed has been formatted. I have already sent two emails to store-support@codesys.com, but I have not received a response yet. Could you please assist me with this issue as soon as possible?
Last updated: 2025-02-20

Post by clarenced on Multiple applications on one device sharing variables. ^{CODESYS Forge talk (Post)}
Sounds feasible, but how would I create this object so that both applications would use the same instance of it. If this did work, it's still not really the solution I am looking for as it would mean mapping every variable I want to use on the hmi through this object vs I was hopping all the GVL variables would be available.
Last updated: 2025-02-20

Post by smic on put the Port number 80808 in Instance Setting of Deploy Control SL ^{CODESYS Forge talk (Post)}
I am using CODESYS V3.5 SP20 Patch 5. I am trying to use the Webvisu function on a PLC running on Docker. When I enter the port value 8080:8080 in the Instance Setting in Deploy Control SL, it is not saved. Can you please help me?
Last updated: 2025-02-21

Post by timvh on TargetVisu started in windowed or not full screen ^{CODESYS Forge talk (Post)}
In your soft plc folder, there is a file called targetvisuextern.cfg. Open this with a text editor to change the settings. Remove the semi-colons in front of the lines to enable your custom window settings. WindowType=0 means you will get a moveable window. Save the file and restart the soft PLC to enable these settings.
Last updated: 2025-02-26

Post by helcioburd on How long can a WSTRING be in CodeSys V3? ^{CODESYS Forge talk (Post)}
Thank you, very useful information. I did a library for serial communication and could not understand the reason only 256 chars could be read (after sending more than 256). Following your suggestion, I can now send any number of chars and everything will be received.
Last updated: 2025-03-02

Post by cellohorst on File Creation Issue ^{CODESYS Forge talk (Post)}
Nope! The file path is $$PlcLogic$$ and NOT $$PLCLogic$$. Otherwise a new folder ('PLCLogic') is created (at least with a linux rt - like raspberry or compute module) with the new file in it if you open the file with eFileMode := FILE.MODE.MRDWR. That is a bad bug that I'll report right after this comment.
Last updated: 2025-03-03

Post by alawwirbilal on Codesys for raspberry pi 5 not working exactly ^{CODESYS Forge talk (Post)}
Hello, I have installed the runtime system on my raspberry pi 5 and when I scan for the devices it sees. But when I try to log in to the device it always ask me for a password and no matter what I give it says this is a wrong password. anyone could help?
Last updated: 2025-03-06

Post by timvh on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
You can consider using OR_ELSE: Coils[0] := Coils[0] OR_ELSE (Buttons[0] AND Sensors[0] > 6); https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_or_else.html IF Coils[0] is TRUE, then the rest is not relevant anymore and doesn't have to be evaluated anymore. PS, there is also an AND_THEN https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_operator_and_then.html
Last updated: 2025-03-08

Post by fmon on Modbus : dis- / re-connect cable: modbus does not re-start ^{CODESYS Forge talk (Post)}
Problem solved The client modbus cycle time was linked to a task at 500ms. Whereas the channel modbus was at 200ms. Certainly problem of packages synchronisation. I let the client modbus cycle time to be handled by itself (See attachement) --> "Use the bus cyle time parameters" (traduce from french) See attachement
Last updated: 2025-03-18

Post by peterkcontrols on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
I am using Codesys Control RTE V3 Version 3.5.21.0 I am not sure what you are asking. Which hardware ID has the network interface card? I have ran ipconfig /all and attached an image. Let me know what other information I can provide to you to help troubleshoot this problem. Thank
Last updated: 2025-03-18

Post by sking on ModbusTCP/slave ^{CODESYS Forge talk (Post)}
i can not find the solution, i have 2 modbus tcp slave and i want to know how to do when one is activated the other one is desactivated. that means when i run the project, with a bouton click on my web visu i can choose wich modbus slave i want to activate. can someone have a solution plz ? thank you :)
Last updated: 2025-04-01

Post by jba-eltech on Moving Frames ^{CODESYS Forge talk (Post)}
Hello everyone. I am using Codesys and saw in a YouTube video on the Codesys channel (https://www.youtube.com/watch?v=y_l2siXY7dA) that you can create frames and move them with the mouse. However, the video does not show how to do this. Can someone please explain it to me? Thank you very much.
Last updated: 2025-04-01

Post by snguyen on Atomic and Shared memory? ^{CODESYS Forge talk (Post)}
Hi, I've read that you can perform Atomic instructions like AtomicReadLInt on variables. However, I'd like to know if this uses stdatomic internally. My main question is : Is it possible to share atomic types in shared memory with CodeSys. If so, what types should they be declared as? If not, are the atomic functions lock-free or does it use a mutex?
Last updated: 2025-04-15

Post by andrej on Creating, using an external Function. ^{CODESYS Forge talk (Post)}
Hello, many thanks for your reply. I checked the logs. It seems that dll is not loaded. However other dll such as the Webserver are loaded. Could you tell me what I need to do such that my dll is loaded. (Furthermore I changed the C-Function a bit. I used the M4.exe from the SDK.) Many thanks.
Last updated: 2025-04-23

Post by rov-dk on Professional Developer Edition (git): Invalid URI ^{CODESYS Forge talk (Post)}
Hi All, I'm using git (1.4.0.0) in CoDeSys (Rexroth ctrlX 3.4 / CoDeSys 3.5.20.30). Every time I click on a modified file in the "Git Status & Staging" view I get the message out of attached file. I do not find any hint: Does anybody have an idea what the cause is? Thanks in advance.
Last updated: 2025-04-28

Sort by relevance or date