Post by bertoldo on Robo Scara3 ^{CODESYS Forge talk (Post)}
the interpolation block does not start from the absolute value. It returns to zero even when writing to dLastWayPosX , Y , Z.
Last updated: 2024-10-15

Post by eschwellinger on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
using Arm SL or Arm 64 SL might be an option
Last updated: 2024-10-15

Post by eschwellinger on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
start point for doing this is for sure this example here: https://content.helpme-codesys.com/en/libs/EtherCATStack/Current/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2024-10-16

Post by mini-developer on Profinet Abort AR Error ^{CODESYS Forge talk (Post)}
Hello, I have this Problem when i disconnect the PC from another ETH-Port. Did you solve the Problem?
Last updated: 2024-10-16

Post by mini-developer on Profinet Abort AR Error ^{CODESYS Forge talk (Post)}
When the PC is connected on the other ETH-Port there is no Problem.
Last updated: 2024-10-16

Post by paulpotat on Can't open license manager with raspberry CM4 ^{CODESYS Forge talk (Post)}
Because we bought several raspberry pi licenses that can only be activated with a raspberry pi runtime.
Last updated: 2024-10-17

Lizenz ausversehen für WORKSTATION statt für GERÄT installiert - wie kann ich diese verschieben? ^{CODESYS Forge talk (Thread)}
Lizenz ausversehen für WORKSTATION statt für GERÄT installiert - wie kann ich diese verschieben?
Last updated: 2024-10-19

Post by pietrobalint on Persistent variables are not read after initialization ^{CODESYS Forge talk (Post)}
What do you mean it is part of the licensefree part? I attached my error message.
Last updated: 2024-10-20

Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Thread)}
Modbus: Is there a way to get the channel index from the channel name?
Last updated: 2024-10-21

Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
Hello, i want to connect my automation server and i follow the steps as desribed in the video series(https://www.youtube.com/watch?v=iiPKyyO4M00&list=PLaws15OZmd7Uu2W23zX2w424aI3TrOfHf) and also that guide (https://content.helpme-codesys.com/en/CODESYS%20Automation%20Server/_cas_add_plc_to_server.html). When i go to "Allow Edge Gateway configuration.." from the Codesys gateway Systray running i get the message in the attached picture, so i open the Gateway.cgf but the file doesn't contain an cmpedgegateway section as mentioned in the message. I have installed all the latest versions codesys and of the components mentioned in the guides. How can i solve that problem?
Last updated: 2024-10-21

Post by banialuk on Modbus Server TCP -error code ^{CODESYS Forge talk (Post)}
Hello, I create modbus tcp server, but I have this error: how resolve this problem?
Last updated: 2024-10-21

Post by bjarne-pagaard on OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Post)}
The Control RTE is 3.5.18.20, using the symbol configuration for exposure of variables.
Last updated: 2024-10-22

Post by taqamert on CANopen PDO Issue with Pressure Sensor in Codesys ^{CODESYS Forge talk (Post)}
Hello everyone, I am using an IFM CR0303 model PLC, which has a tilt sensor and a pressure sensor connected via CANopen. Both sensors are from the same brand (ATEK). I can read data from the tilt sensor without any issues, but I am unable to read data from the pressure sensor. I have added the EDS file in the PLC configuration and adjusted the node-ID settings. When I check with the PCAN-View application, I can see that the selected PDOs are coming through, but the data is not reaching the Codesys side. What could be the issue, and what can I try to resolve it? Can anyone help me?
Last updated: 2024-10-22

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Could you please check which EdgeGateway Version is up and running?
Last updated: 2024-10-23

Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Trent, yes should work without, let me check. Regards Edwin
Last updated: 2024-10-23

Post by timvh on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
It seems you have 2 network interfaces. Did you try eth1? Did you already configure the IP address for this interface in Linux? If yes, then maybe undo this. - or only set eth0 in the Nic configuration without anything else (so no IP address, because this is already set in Linux). For more information about the Nic settings, see (probably already read it?): https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_obj_deploy_control_sl_configuration.html PS, if you only want to run CODESYS Control SL, you don't necessarily need the Virtual PLC variant. You could also install and run the CODESYS Control SL Runtime in the Host operating system. This way you should also be able to access the serial port and directly access all ethernet ports. Maybe this is easier?
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
I made a mistake it is not end0 but eth0. But I have the same error.
Last updated: 2024-10-23

Post by ben1 on Alarm Table rows font size not change ^{CODESYS Forge talk (Post)}
the alarm font settings are found in the alarm class setup
Last updated: 2024-10-23

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
No, my vpn is 10.0.0.12. The docker interface is 172.17.0.1.
Last updated: 2024-10-24

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Your right, much easier with Linux control SL ARM. Everything is working.
Last updated: 2024-10-24

Temu Coupon Code North Carolina {USA} ⤠ ["^act900074^"] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code North Carolina {USA} ⤠ ["^act900074^"] for New and Existing Customers
Last updated: 2024-10-25

Temu Coupon Code Missouri {USA} ➵ ["^acq615756^"] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Missouri {USA} ➵ ["^acq615756^"] for New and Existing Customers
Last updated: 2024-10-25

Latest TopCashback deals: $35 for new members sign-up Bonus(October 2024) ^{CODESYS Forge talk (Thread)}
Latest TopCashback deals: $35 for new members sign-up Bonus(October 2024)
Last updated: 2024-10-25

Temu Coupon Code New York {USA} ⤘ ["^acq615756^"] for New App Users ^{CODESYS Forge talk (Thread)}
Temu Coupon Code New York {USA} ⤘ ["^acq615756^"] for New App Users
Last updated: 2024-10-25

Temu Coupon Code Florida {USA} ↪ ["^acq717533^"] for New and Existing Customers ^{CODESYS Forge talk (Thread)}
Temu Coupon Code Florida {USA} ↪ ["^acq717533^"] for New and Existing Customers
Last updated: 2024-10-25

Sort by relevance or date