Post by gatto on Undertanding Application Based Licenses ^{CODESYS Forge talk (Post)}
Hi, i think you are right. Did you press the key shopping cart? Codesys tells you the license. What I don't appreciate is that i need an additional license for communication. The system reports opc ua but this cheats you. This is communication that also concerns the tag symbols that codesys eth v3 exchanges with an operator panel. Attached is a screenshot of my case where you can see that communication opc ua is cheating you. 512 tags included in the program license are few. So, I had to buy 2 licenses. one for the program and one for communication. I don't like this policy.
Last updated: 2024-11-11

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Hi, When trying to activate a control Basic L license on a Wago PFC200 750-8203 the error The selected container ... does not fit your ticket comes up and won't allow licensing. I have deleted the /var/opt/codesys/cmact_license/ content 3 times and the container number changed each time after a reboot, but the problem persists. Not a happy first time experience with those weird application based licenses. IDE is 19.20. This was a e!Cockpit FW22 PLC and I used Deploy Control SL to make the green web interface red. WBM shows Codesys 2 and e!Runtime active which is a bit weird. What do I do now? Regards Heinz
Last updated: 2025-01-08

Post by srouse on Adding a Softmotion License to a Weintek HMI ^{CODESYS Forge talk (Post)}
I am trying to add a Softmotion license to my Weintek HMI. The HMI is already licensed for Codesys and I have already purchased a Softmotion license as well. When using the License Manager I get an error saying the licensing info is not available. I am fairly new to working with Codesys so I am at a bit of a loss and there seems very little information online about troubleshooting this specific issue. I have attached the error message below. If there are any ideas of how to troubleshoot this better I would be happy to hear them.
Last updated: 2025-01-09

Post by reiterf on Visualisierungs-Stil White style, 3.5.16.0 verursacht Überseztungsfehler ^{CODESYS Forge talk (Post)}
Hi, ich möchte ein kleine Testaufbau viualisieren und hätte mich für den Stil "White" entschieden. nun ist es allerdings so daß dieser Stiel einige fehler beim übersetzen erzeugt. Ich habe dann versicht auf den Basic-Style zurückzugehen -- dann sind auch die Fehler weg. Leider wird dann aus der WebVisu (nur am Gerät) kein Druckknopf mehr angezeigt. Ich habe die gleichen Fehler auf 2 Codesys-Installationen (Gleicher Software Stand, 2 PCs) Kann mir da jemand weiterhelfen? ... ich Konnte den Fehler zwar nicht finden aber durch eine Komplette Deinstallation von Codesys und Übertragung der Projektdaten in ein neues Projekt ist der Fehler verschwunden. danke
Last updated: 2025-02-27

Post by milosfejgl on Codesys Licenses - How to reload them after updating the Raspberry Pi OS ^{CODESYS Forge talk (Post)}
We use several control units running on Raspberry Pi, programmed using Codesys software, with multiple licenses stored as soft containers. We are planning to update the SD card image of the Raspberry Pi to a newer OS version. However, we are concerned that this process might result in the loss of our soft container licenses. Is there a way to temporarily deactivate the license so that it can be reactivated on the updated system? Alternatively, what would be the best method to preserve the licenses during the update? Thank you in advance for any responses!
Last updated: 2025-03-13

Post by agentcousto on [Bug report] Issue with Importing XML Files Containing "POINTER TO" Variables in Codesys Platform Plugins Versions 2.7 and 2.8 ^{CODESYS Forge talk (Post)}
Hello, I have developed a Python script that I run to import XML files into my project. For this, I use the Python function import_xml(). Everything was working fine when I was using Codesys platform plugins version 2.6.1.2320, but since I upgraded to versions 2.7 and even 2.8, some files are no longer imported correctly. After some research, I identified that all the files containing variables of the type "POINTER TO" are affected. I have attached a screenshot of the error I am encountering. Do you know about this bug? Do you plan to fix it?
Last updated: 2025-03-26

Post by rickmotion on Opening and saving files with fileOpenSave dialog ^{CODESYS Forge talk (Post)}
I have a customer that types in machine programs in a text file for machines and lets the machine execute it. In the old situation they can open and edit these files in a winform application. Now I want to move this to codesys. What I need is a simple way to open, close, save, edit the machine file in codesys visualisation. I want to use the fileOpenSave dialog. But don't understand how it works. I have the file transfer example and some other examples. But it is hard to figure out how the part with the file dialog works so that you can select a folder or file. Does someone know how that works?
Last updated: 2025-03-26

Post by rickmotion on Opening and saving files with fileOpenSave dialog ^{CODESYS Forge talk (Post)}
I have a customer that types in machine programs in a text file for machines and lets the machine execute it. In the old situation they can open and edit these files in a winform application. Now I want to move this to codesys. What I need is a simple way to open, close, save, edit the machine file in codesys visualisation. I want to use the fileOpenSave dialog. But don't understand how it works. I have the file transfer example and some other examples. But it is hard to figure out how the part with the file dialog works so that you can select a folder or file. Does someone know how that works?
Last updated: 2025-03-26

Post by eaglealex on Length of string and Array of bytes ^{CODESYS Forge talk (Post)}
Hello! I have tried read a file to the string variable. But I faced a problem - there is about 2800 bytes of information in file, but string have a limit 2393 bytes. I made two variables with same address (for automatic convertion) - string[3000] and array of bytes[1..3000]. And I noticed that array of bytes contains all information from file, but string shows only first 2393 bytes. So I have lost information. Is there really such a limitation? Or I have an error in my program and Codesys 2.3 have no limit for such kind of conversation between string and array of bytes? Thank you very much!
Last updated: 2025-04-01

Post by ahofer on ETHERCAT EK1100 und EL8601-8411 ^{CODESYS Forge talk (Post)}
Liebe Forumsteilnehmer, hat jemand schon die Beckhoff-Multi-Klemme EL8601-8411 am EK1100 zusammen mit dem Raspberry Pi verwendet? Ich bin gerade am Testen und habe festgestellt - dass das mit dem Einstecken der Geräte nur teilweise funktioniert. - DI/DO und AI(U) lässt sich benutzen. - Den Zähler kann ich nicht testen, weil das Gerät nicht einsteckbar ist. Ich kann es zwar einstecken, aber dann läuft der Bus nicht. - Beim Encodereingang fehlt mir vermutlich ein geeigneter Funktionsbaustein um den zu betreiben. Gibts da evtl. irgendwo eine Bibliothek? Ich benutze CODESYS V3.5.19.70, habe die neuesten Gerätedateien (XML) von Beckhoff eingespielt und für den Raspberry Pi benutze ich die Version Codesys Control for Raspberry Pi 4.14. Für Antworten bedanke ich mich schon mal herzlich VG A. Hofer
Last updated: 2025-04-04

Post by pernockham on How to manage soft container licenses for (remote) multi units? ^{CODESYS Forge talk (Post)}
Using Codesys runtime for Linux and thinking of the process of preparing multiple such systems for my customer. I don't necessarily have physical access to these units, they can be (very) remote. The idea so far is to use an image to install the Linux OS and codesys runtime. Application updates can be done by distribution of the PlcLogic/Application/application.app and application.crc files. But whats the most practical way of managing the license for these units? Do each controller need to be physically connected to a License Manager instance or can licenses be distributed by means of a license file for each unit? I believe that the license should be stored in soft containers for each unit. Help and insights appreciated! Per
Last updated: 2025-04-04

Post by l-lll on The plug-in is required by the current version profile but has not been installed ^{CODESYS Forge talk (Post)}
Hello everyone, I meet this problem after installing Codesys SP20 Patch 5 on Windows 11 while the dialog box shows that the installation process has been successfully completed. Every time I open Codesys I get an error that says (Attached image): 'One or more issues ocurred with the current version profile. Please contact the vendor to resolve these problems. The plug-in {....} (Exactly x.x.x.x) is required by the current version profile., but has not been installed. It is highly recommended that the tools is terminated. Do you wanto to terminate now?' Can someone help me please, thanks very much！
Last updated: 2025-05-14

Post by l-lll on The plug-in is required by the current version profile but has not been installed ^{CODESYS Forge talk (Post)}
Hello everyone, I meet this problem after installing Codesys SP20 Patch 5 on Windows 11 while the dialog box shows that the installation process has been successfully completed. Every time I open Codesys I get an error that says (Attached image): 'One or more issues ocurred with the current version profile. Please contact the vendor to resolve these problems. The plug-in {....} (Exactly x.x.x.x) is required by the current version profile., but has not been installed. It is highly recommended that the tools is terminated. Do you wanto to terminate now?' Can someone help me please, thanks very much！
Last updated: 2025-05-14

Post by l-lll on The plug-in is required by the current version profile but has not been installed ^{CODESYS Forge talk (Post)}
Hello everyone, I meet this problem after installing Codesys SP20 Patch 5 on Windows 11 while the dialog box shows that the installation process has been successfully completed. Every time I open Codesys I get an error that says (Attached image): 'One or more issues ocurred with the current version profile. Please contact the vendor to resolve these problems. The plug-in {....} (Exactly x.x.x.x) is required by the current version profile., but has not been installed. It is highly recommended that the tools is terminated. Do you wanto to terminate now?' Can someone help me please, thanks very much！
Last updated: 2025-05-14

Post by joerg-schneider on SVN: "Include externals" Fehlermeldung ^{CODESYS Forge talk (Post)}
Ich habe eine Bibliothek unter Subversion verwaltet und verwende Teile davon in anderen Subversion Projekten mit "Include externals". Wenn man die Bibliothek mit "Copy (Branch/Tag)" kopiert, lässt sich die Kopie nicht mehr mit "Include externals" in anderen Projekten einbinden. Es kommt eine Fehlermeldung, dass ein Pfad nicht gefunden wurde (siehe Anhang). Auch wenn man das Bibliotheksprojekt direkt auf dem SVN Server kopiert (mit Tortoise SVN), kommt die gleiche Fehlermeldung beim Versuch die Kopie mit "Include externals" in anderen Projekten einzubinden. Ich nutze Codesys 3.5.20.60 mit Codesys SVN 4.6.2.0. Wie kann man Projekte auf dem SVN Server so kopieren/verschieben, dass sie später mit "Include externals" in anderen Projekten verwendet werden können?
Last updated: 2025-07-21

Post by fedex03 on Read Global Variable from an IoT Device ^{CODESYS Forge talk (Post)}
Hello everyone, I am new to the forum, and to programming with CodeSys. I am dealing with IoT device for industry and I should check if a device is able to read/write global variables in an EtherNet/IP Master. Since I do not have an EtherNet/IP PLC, I thought of using CodeSys as a softPLC. I created a program with a set of global variables (GVL) and a task that increments them. I would like to know if I need to enable any options so that the global variables can be read by IoT devices. My device supports Class 2 Class (Explicit Messaging Connection) communication. Thank you in advance for your help.
Last updated: 2025-07-22

Post by bruceae on Special Characters ^{CODESYS Forge talk (Post)}
Hello, I am fairly new to the codesys environment. Is there a reference chart that I can look at in order to write special character in a string? The Special characters that I need to inclue inside the string are as follows; Null Bell Carriage Return I have a TCP_Write command that I am sending to an external device. In order for that device to function properly it needs to see the string with the null and bell characters as the header, followed by the desired command, terminated with the carriage return. Any reference sheet or how to write this in the actual string would be greatly appreciated.
Last updated: 2025-08-26

Post by taywinkel on Virtual Runtime CSV Utility Error ^{CODESYS Forge talk (Post)}
Hello, I am having trouble figuring out the proper location for my virtual runtime to create a .CSV file. No matter the file location I set, I get error 14 (CANNOT_OPEN_DIRECTORY). I have tried multiple different file paths ('/', '/var/opt/codesysvcontrol/PlcLogic', '/var/opt/codesys/'). I understand that there is only certain places that Codesys can read/write. I am also running this virtual runtime in a Podman container. Does anyone know what the location should be? I attached the archive I was using, a project that tests CSV capability that I borrowed from someone else. Thanks!
Last updated: 2025-09-03

Post by monteta on Automation without UI ^{CODESYS Forge talk (Post)}
Hello all, there is my problem. i have a project on a PC A who work properly, I aim to take this project and place it on a Pc B with a blank Codesys installed. All seemd to work, the project is created on the PC B, i create my with with online.create_online_application(project.project.active_application) recover my onlineDevice and try onlinedevice.connect() so that i can use create_live_user_management() but then a problem occure on my connect() saying gateway not configured properly. I have setted my set_credentials_for_initial_user(). when i use the Ui, there is absolutely no problem. an other question, is it possible to use the Start and Stop PLC of codesys Control Systray directly in my python script? So that if it detect that it's stopped, then he automatically start it?
Last updated: 2025-09-25

Post by sean-barton on Function block method default arguments ^{CODESYS Forge talk (Post)}
I have default arguments specified for function block methods but when calling a method, an error is produced requiring me to supply all the arguments despite there being default values. According to the online documentation, under section "Calling a Method" and subsection "argument passing" of the following link: https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_obj_method.html "Passing an argument for an input ... can be omitted ... for which a default or initial value was specified in the declaration..." I have found this to be the case for all Codesys IDEs I've used, 3.5.11, 3.5.16, 3.5.17, 3.5.19. Am I missing something?
Last updated: 2023-12-21

Post by mohammadasif on Blink Function definition is wrong in codesys online help ^{CODESYS Forge talk (Post)}
https://content.helpme-codesys.com/en/libs/Util/Current/Signals/BLINK.html in the above link, please correct your website the following: "Output value, starts with FALSE and switches between TRUE and FALSE for the given high and low times" it should actually be: "Output value, starts with TRUE and switches between TRUE and FALSE for the given high and low times" if not please let me know if this has changed in a util library update, in your older website it has the right definition here: https://help.codesys.com/webapp/blink;product=codesys;version=3.5.11.0
Last updated: 2023-12-28

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
Unfortunately not. The folder does not work. There are neither error messages nor any other indication that this may be due to missing rights. I have searched the entire forum and also tested the Codesys example. The simple recipe management generally does not work! The Raspi crashes with the extended recipe management from the example. I have now found another sample that works. https://forge.codesys.com/forge/talk/Engineering/thread/61c6a04b79/ Many thanks to mcodem. After some trial and error I have found out: xcreate must be called at least once at runtime. After that xload_write and xread_save work All other functions do not work. It is also possible to save to the /home/Documents folder. So it is not due to the rights. It would be nice if Codesys would check where the problem really lies.
Last updated: 2023-12-30

Post by davidbo on Does the new license policy means I have to upgrade everything? ^{CODESYS Forge talk (Post)}
We have several old project written with 3.5.17 and 3.5.18 and also some older Until now when a customer ordered a product from us. We just installed (we have a tested image) and added a license Now the license policy has changed and we have to buy a License Control Basic S or M However it only works with CODESYS Development System Version 3.5.19.10 or higher Does that mean we have to upgrade all our old products? That is not a simple task as a previous post has explained with weird error messages from CODESYS V3.5. Next we have to do rigorous testing of our applications afterwards. It is very expensive
Last updated: 2024-01-11

Post by alexgooi on Is it possible in the log to see previous shutdown ^{CODESYS Forge talk (Post)}
Hi DavidBo, In general Codesys is used to control equipment and an exception is the worst thing that can happen in your installation. If you cannot prevent the exception from triggering, you could implement a Try catch statement, with this solution your controller keeps on running and you are able to handle the exception. __TRY //This statement will trigger an exception Result := 4/0; __CATCH(exc) //Handle the exception HandleException(exc, strExceptionText => strExceptionText); // From the Codesys help file //Create a log file //-------------------------------------------------------- __ENDTRY What you also could do is implement implicit checks, these functions cover most of the exceptions (like dividing by zero) See picture But in general avoid a complete controller shutdown!
Last updated: 2024-02-09

Post by arundara on OPC UA Server Stops after 5 consecutive disconnections of ethernet port ^{CODESYS Forge talk (Post)}
Hello Every one, During testing of OPC UA communication between UA Expert software and the CODESYS SoftPLC on a Linux environment, an observation was made. When the Ethernet cable was disconnected and reconnected with 2-minute intervals, on the 5th attempt, the OPC UA connection failed to establish in UA Expert software. At this juncture, restarting the CODESYS SoftPLC enabled the reestablishment of OPC UA communication. The same result was obtained when testing on a Raspberry Pi SoftPLC. What is the reason behind this phenomenon? and whether there are settings to stop this behavior? Please help. Thanks & Regards.
Last updated: 2024-02-13

Sort by relevance or date