Post by m83coding on Raspberry Pi Codesys SPI Master ^{CODESYS Forge talk (Post)}
Hello, I am trying to control shift registers 74HC596 and 74HC165 via Raspberry PI with SPI interface. So far I did it with a Microcontroller and now I wanna upgrade my Projekt with Raspberry Pi and Codesys Software to be more flexible. I tried to adapt PiFace Function Block to just send or recive a 8 bit via SPI interface of the my Raspberry Pi. With following code (see attached screenshots) * PLC_PRG * PiFaceDigital * PiFaceDigital.write8 * PiFaceDigital.read8 I have a signal at SCK and MOSI pin of the PI, so far so good. But I really struggle with the unterstanding of the code. Is there some detailed description of each line of code? Or is there somebody in the community who can explain each line of code? Or is there a more simple way to send / recive 8 bit via SPI? Manuel
Last updated: 2024-04-23

Post by peterned on CNC - system goes to X=0 Y=0 before CNC file execution starts, how to avoid that? ^{CODESYS Forge talk (Post)}
Hi, I have a XY system and use a CNC file to move it. Everything works OK, except for the following: when CNC execution starts, the system rushes at high speed to (X=0, Y=0) point, and only then goes to the first line of the CNC file. If one of the axes is near 0, the system jumps and immediately stops with an error. In the CNC file settings (screenshot attached) I specified low default values for speed/acceleration and a start position different from 0,0 - but all that is ignored. Any idea how to avoid that move to 0,0 ? Thanks.
Last updated: 2024-04-26

Post by valenting on Problem with Licenced Software Metrics ^{CODESYS Forge talk (Post)}
Update : I updated my project's compiler version to the latest and it finally works
Last updated: 2024-04-29

Post by alex2 on Codesys SVN ^{CODESYS Forge talk (Post)}
To summarize, we have no choice but to use SVN... And what about the sp16?
Last updated: 2024-05-01

Post by tiagomachado88 on suggestion: collapse Ladder networks similar to Siemens' TIA Portal ^{CODESYS Forge talk (Post)}
Hello, It's just a suggestion to facilitate viewing and monitoring! Regards, Tiago
Last updated: 2024-05-03

Post by eschwellinger on New Ladder Diagram conversion does not work due to missing features ^{CODESYS Forge talk (Post)}
please send project archive and steps to repeat to - my question in the CODESYS store
Last updated: 2024-05-14

Post by corriibme on Read Serial Number of PLC ^{CODESYS Forge talk (Post)}
I have recently used this example from @Brine, and it worked. Thanks
Last updated: 2024-05-21

Post by alexgooi on FB_INIT in library ^{CODESYS Forge talk (Post)}
Hi Paro, I have tried this and it seemed to have solved the problem, thank you very much!
Last updated: 2024-05-23

Post by zer0g on Modbus Client Request Not Processed ^{CODESYS Forge talk (Post)}
Hi, Thank you for your suggestion but the problem is fixed after I disabled and enabled the network adapter from Windows settings.
Last updated: 2024-05-30

Post by viksym on Get text from textlist ^{CODESYS Forge talk (Post)}
Thank you, but sadly I already tried this and it also doesn't work. It's not doing anything.
Last updated: 2024-06-03

Post by codesysdave on Using globals without a prefix (bMyTag vs GVL.bMyTag) ^{CODESYS Forge talk (Post)}
Over 5 years later, you helped me tremendously. Thanks. And great kitty picture.
Last updated: 2024-06-04

Post by fajean on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
4.11 appears to solve the problem. Thanks for your help. I had first installed the 64-bit version of RPiOS, but looking at various posts and the product's page on the store which only lists 32-bit compatibility, I downgraded to the 32-bit version. I did this before trying 4.11, and it did not solve the problem. Thus my working system is 32-bit, and I am wondering if I can go back to 64-bit or not. An 64-bit OS is not listed as compatible on the store's web page, but when installing there actually is a 64-bit version listed (automatically chosen when installing on 64-bit, but otherwise greyed out). Is 64-bit supported and the website is out-of-date, or is that some kind of work-in-progress?
Last updated: 2024-06-13

Post by nano on Persistent variable storage ^{CODESYS Forge talk (Post)}
use the persistence manager. with the persistence-manager, you're aböe to define how, when and where you store your data
Last updated: 2024-06-16

Post by mos89p on Data source and safety PLC ^{CODESYS Forge talk (Post)}
it works only for me when i specify an IP adress in communication tab
Last updated: 2024-06-17

Post by kazuhiro on Problems using MySql Library and SysProcessExecuteCommand2 together ^{CODESYS Forge talk (Post)}
I use fbMsSQL_compact(FUN) of the MySQL Library to write data to the database. There is no problem when writing data using only fbMsSQL_compact(FUN). However, when I try to write data obtained using SysProcessExecuteCommand2 to the database using fbMsSQL_compact(FUN), an error message "Dest server on ip address:xxx.xxx.xxx.xxx and port:1433 is unreachable" appears and writing is not possible. From what I have researched, it seems that writing is not completed in one cycle of fbMsSQL_compact(FUN), and when SysProcessExecuteCommand2 is executed first in the second cycle, the work done in one cycle of fbMsSQL_compact(FUN) is reset. Could you please give me some advice?
Last updated: 2024-06-18

Post by kazuhiro on Problems using MySql Library and SysProcessExecuteCommand2 together ^{CODESYS Forge talk (Post)}
I use fbMsSQL_compact(FUN) of the MySQL Library to write data to the database. There is no problem when writing data using only fbMsSQL_compact(FUN). However, when I try to write data obtained using SysProcessExecuteCommand2 to the database using fbMsSQL_compact(FUN), an error message "Dest server on ip address:xxx.xxx.xxx.xxx and port:1433 is unreachable" appears and writing is not possible. From what I have researched, it seems that writing is not completed in one cycle of fbMsSQL_compact(FUN), and when SysProcessExecuteCommand2 is executed first in the second cycle, the work done in one cycle of fbMsSQL_compact(FUN) is reset. Could you please give me some advice?
Last updated: 2024-06-18

Post by paro on SysPlcCtrl23 and C0338: The library 'cmperrors interfaces, 3.5.5.0 (system)' is supported just in 32 bit applications ^{CODESYS Forge talk (Post)}
CmpApp https://forge.codesys.com/prj/codesys-example/application-man/home/Home/
Last updated: 2024-06-17

Post by bruno-roth on Codesys access to DICTIONARY OBJECTS of ethercat (CoE ) Servo Drive ^{CODESYS Forge talk (Post)}
You could use the FBs ETC_CO_SdoWrite and ETC_CO_SdoRead
Last updated: 2024-06-19

Post by kuegerls on SysProcessExecuteCommand2 and CANopen Device ^{CODESYS Forge talk (Post)}
Hello, CODESYS Control is running on my RevPi, and my system communicates over a CANbus with a master using the ConnectCan module (Slave - CANopen Device). The communication works perfectly fine so far. However, as soon as I call a Python script with "SysProcessExecuteCommand2" that creates a CSV file and executes without errors, the master does not adopt any changes to the Transmission Process Data Objects (TPDOs). I don't quite understand what one has to do with the other, and perhaps someone can help me with this. Here is my script call: SysProcess.SysProcessExecuteCommand2(pszCommand:='python /home/pi/test.py', pszStdOut:=sCMDOutput, udiStdOutLen:= SIZEOF(sCMDOutput), pResult := ADR(eResult)); Thank you in advance! Best regards, Stefan
Last updated: 2024-06-20

Post by nano on variables between two applications ^{CODESYS Forge talk (Post)}
use an gvl for interact variables beetween apps and threads. this should work
Last updated: 2024-06-23

Post by rafael on Wbm/runtime and visualization login ^{CODESYS Forge talk (Post)}
Solved, there is a configuration inside the WBM where I can disable this login option (config>ports config)
Last updated: 2024-06-25

Post by ranadheer on Control Win SL licensing ^{CODESYS Forge talk (Post)}
Hi johnlee and jeffgamsby Is Control win SL is a SoftPLc Extension SL
Last updated: 2025-10-18

Post by fari on Configure J1939 I/O Mapping via Scripting ^{CODESYS Forge talk (Post)}
Hi everyone, With the latest version of Codesys, it’s now possible to import DBC files directly into the J1939 Manager, which is great. However, I’m trying to achieve the same thing programmatically and can’t find any scripting functions related to import_dbc or any host_parameter that would let me configure PGNs and signal mappings automatically. So far, I’ve managed to add the J1939 Manager and an ECU, and I can pass the DBC database to it, but I’m stuck when it comes to adding the signals. Has anyone figured out if this can be done through scripting? (Attached is an illustration of what I am trying to accomplish programmatically). Thanks in advance.
Last updated: 2025-10-24

Post by eschwellinger on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
runtime could always be in latest version. just keep everything in CODESYS stable and deploy the latest runtime. This will work.
Last updated: 2025-10-25

Post by vtec35 on search runtime 4.9.0.0 for pi 3 ^{CODESYS Forge talk (Post)}
i m not familiar with installation/firmware/version/runtime, juste the machine worked fine before, and now kaput lol
Last updated: 2025-10-26

Sort by relevance or date