Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Rampup and rampdown ^{CODESYS Forge talk (Thread)}
Rampup and rampdown
Last updated: 2024-03-28

Post by jetme on Rampup and rampdown ^{CODESYS Forge talk (Post)}
i'm using FB Ramp_INT function to ramp my pump up and down but I will like to ramp up at a different time and also ramp down at a different time. How can I do that.
Last updated: 2024-03-28

Post by mimodia1 on I do not have any reedings in RUN MODE from MPU6050........ ^{CODESYS Forge talk (Post)}
Good morning, mecke96. Exactly the same thing happens to me, although I have not done the part of executing a .py file. It only reads the temperature and the counter, but the other values are zero as in your image "no readings". I have tested the MPU6050 device on an Arduino and it works. Could you tell me if you solved it?
Last updated: 2024-03-29

CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Thread)}
CAA SerialCOM - hCom Reset max value 1023
Last updated: 2024-03-29

I do not have any reedings in RUN MODE from MPU6050........ ^{CODESYS Forge talk (Thread)}
I do not have any reedings in RUN MODE from MPU6050........
Last updated: 2024-03-29

EtherCat Slaves diagnosis ^{CODESYS Forge talk (Thread)}
EtherCat Slaves diagnosis
Last updated: 2024-03-29

Post by albzen on EtherCat Slaves diagnosis ^{CODESYS Forge talk (Post)}
Hello everybody, I'm working on a RunTime Plc (Codesys 3.5.16/18.20) connected to an EtherCat bus with many devices. The bus has some communication fault but I don't know how understand which is the device or the cable that has the trouble. To understand the cause of the problem I would like to read the WKC (Working counter) of the devices (0x0300...0x030C), how is explained in EtherCat documents, but it seems that the read of the counter is disabled. Attached there is an extract of the Ethercat document. Can anyone give me some advice about how and with function can I read it. Thank you in advance!
Last updated: 2024-03-29

Post by albzen on EtherCat Slaves diagnosis ^{CODESYS Forge talk (Post)}
Hello everybody, I'm working on a RunTime Plc (Codesys 3.5.16/18.20) connected to an EtherCat bus with many devices. The bus has some communication fault but I don't know how understand which is the device or the cable that has the trouble. To understand the cause of the problem I would like to read the WKC (Working counter) of the devices (0x0300...0x030C), how is explained in EtherCat documents, but it seems that the read of the counter is disabled. Attached there is an extract of the Ethercat document. Can anyone give me some advice about how and with function can I read it. Thank you in advance!
Last updated: 2024-03-29

EtherCat Slaves diagnosis ^{CODESYS Forge talk (Thread)}
EtherCat Slaves diagnosis
Last updated: 2024-03-29

Codesys Project Protection ^{CODESYS Forge talk (Thread)}
Codesys Project Protection
Last updated: 2024-03-29

Post by mwandy on Codesys Project Protection ^{CODESYS Forge talk (Post)}
I'm having trouble finding clear answers on this. I'm looking for a way to make a Codesys project password protected so that if the project is distributed it can be used to log into a controller to view and debug logic. At this same time I want to prevent the project from being saved as well as edits being downloaded to the controller. Basically I want to make a whole project view-only. What is the beat way to achieve this? I have had minor success with access rights, which solves the problem with trying to login if the project doesn't match what is in the controller. However with this solution, edits can still be made and saved, possibly corrupting the core project, preventing future logins. Any suggestions?
Last updated: 2024-03-29

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
which CODESYS version? Dongle or Softcontainer?
Last updated: 2024-03-30

Post by gabrielmorte on License problem gateway ^{CODESYS Forge talk (Post)}
Hi, did you get it to work? I'm having the same problem.
Last updated: 2024-03-30

Post by marcolim on RPC failed 0x16c9a085 ^{CODESYS Forge talk (Post)}
Hello Matteo, I think the problem is about configuration of firewall (windows firewall usually). You can disable temporary the firewall to check if the communication works. Eventually you can: Go to the control panel -> Windows Defender Firewall -> Allow an app or feature Enable the options to change the settings. Scroll down in the application list to CODESYS and CODESYS ControlService. If you don’t see this application add it to the list. Make sure that all the checkboxes are checked (Domain, Private and public).
Last updated: 2024-04-01

RPC failed 0x16c9a085 ^{CODESYS Forge talk (Thread)}
RPC failed 0x16c9a085
Last updated: 2024-04-01

Post by schnepper on Error building Extension SDK Linux code ^{CODESYS Forge talk (Post)}
I'm installed the CODESYS Control for Linux SL package and am trying to use the Extension API to call a simple C function. When I get to the step to run "make all" on the Linux machine, I get the error: build interface header: out/CmpFirstTestItf.h from CmpFirstTestItf.m4 ERROR: This functionname does not contain _cext (this is mandatory, see help for details): DEF_API(void',CDECL',external_struct__fb_init',(external_struct_fb_init_struct *p)',1,0x1F77E075,0x00000001) Why does "Generate Runtime System Files" create a function that does not have cext in the name? What am I missing?
Last updated: 2024-04-01

Post by adarsh on CAN Tags in Writing in PLC Error. ^{CODESYS Forge talk (Post)}
Hi Folks, I have CAN Device Connected so I am able to read and write data at J1939 Manager. But unable to write the data from the PLC. Geeting the Following error while Writing from the Ladder Logic Diagram. Error:NO Valid Assignment Target How we can Rsolve this Problem
Last updated: 2024-04-02

CAN Tags in Writing in PLC Error. ^{CODESYS Forge talk (Thread)}
CAN Tags in Writing in PLC Error.
Last updated: 2024-04-02

Post by nano on Error building Extension SDK Linux code ^{CODESYS Forge talk (Post)}
Hey schnepper, when i look into your c-file, i would say that only the main-function is declared with cext-addendum in your codesys-library-project. all yöur funtions in library has to be the cext-addendum when the external implementation is activ. if i remeber right, methods and other subelements dont need that, but every base-elements
Last updated: 2024-04-02

Configuration dialog screen with a Frame ^{CODESYS Forge talk (Thread)}
Configuration dialog screen with a Frame
Last updated: 2024-04-02

VisuNamespace != null ^{CODESYS Forge talk (Thread)}
VisuNamespace != null
Last updated: 2024-04-02

Sort by relevance or date